|
| 1 | Pipe Cutter 6 to 25mm Wheel Type Make - Stanley/ Ingco/Taparia / Bharat /JK |
| 2 | Pipe Bender Spool Type up to 25.mm With Stand Manually Operated Make - BEEKAY / BREEZE /INDAR/ Voltz /Stanley |
| 3 | SS and SC Centre Lathe (All Geared) With Minimum Centre Height 6”/150 mm & center distance 1000 mm Along With 3, 4 Jaw Chuck, Auto Feed System, Coolant Arrangement, lightening Lamp, Taper Turning Attachment, Safety Guard & Standard Accessories. Make - Kirloskar / HMT / S Micrometric |
| 4 | Drilling Machine Pillar Sensitive 0-20 mm Capacity With Swivel Table Motorize With Chuck & Key Make - Panchal / SKP / Eifco /Makita |
| 5 | Drilling Machine Bench Sensitive 0-12 mm Capacity With Motorize With Chuck & Key Make -Panchal /SKP / Eifco / Makita |
| 6 | Compressor Unit:- Suitable for Pressure - 8 bar, delivery-50LPM or more, Receiver capacity-24 Liters or more, 250V,50 Hz, with Pressure regulator and water separator Make - Fuji / AIR MASTER/ ELGI/Ingersol Rand |
| 7 | Pneumatic Trainer kit, each consisting of the following Matching components and accessories. Single acting cylinder- max. Stroke length 50mm, Bore dia 20mm – 1 No.Make - Extreme / Genitic / Parker / KOGANEI |
| 8 | (II) Double acting Cylinder - Max.stroke length 100mm, Bore 20mm, magnetic type - 1 No. |
| 9 | (III) 3/2 way valve manually-actuated, Normally closed. - 2 Nos. |
| 10 | (IV) 3/2- Way valve Pneumatically-actuated spring return 1 No. |
| 11 | (V) One way flow control valve - 02 Nos. |
| 12 | (VI) 5/2-Way valve with manually-Operated switch-1No. |
| 13 | (VII) 5/2 Way valve-Pneumatically actuated spring returns. |
| 14 | VIII) 5/2 Way pneumatic actuated valve double point-1 |
| 15 | (IX) 3/2 way roller lever valve direct actuation Normally closed. - 02 Nos. |
| 16 | (X) Shuttle Vale - 01 No. |
| 17 | (XI) Two pressure valve (AND) - 01 No. |
| 18 | (XII) Pressure Gauge 0-16 Bar - 01 No. |
| 19 | (XIII) Manifold with self-closing NRV-6 way - 01 No. |
| 20 | (XIV) Push button station for electrical single point with 3 illuminated momentary-contact switch (1NO + 1 NC) and 1 illuminated contact switch (1NO+1NC), contact load 2 A.- 01 No. |
| 21 | (XV) Relay Station- with 3 relay each with 4 contact set (3NO + 1NC) or change over type, 5 A. - 01 No. |
| 22 | (XVI) 3/2 way single solenoid valve with LED - 01 No., |
| 23 | (XVII) 5/2 Way Single solenoid valve with manual override and LED - 01 No. |
| 24 | (XVIII) 5/2 Way double solenoid valve with manual override and LED - 01 No. |
| 25 | (XIX) Power Supply Unit - Input Voltage 85-265V AC, Output voltage; 24V DC, Out Put Current-Max.4.5A., Short Circuit proof. - 01No. |
| 26 | (XX) Profile Plate, Anodized Aluminum. 1100x700mm. with carriers, Mo punting frames and Mounting accessories (Tube fitted on to the Pneumatic Workstation. - 01 Set |
| 27 | Pneu, matic Workstation with 40 Square mm aluminum profile legs, Wooden work surface, and one Pedestal drawer unit having 5 drawers, each with handle and individual locks, on metallic full, panel drawer slide |
| 28 | (1) Work Table size 1200mm (L) X900mm (W) X900mm. (H), with four custard wheel including two lockable wheel at the front side. |
| 29 | Drawer Size - L 460 mm X W 495mm. X H 158mm. each and overall size of drawer unit (Apex) L 470mm X W 495mm X H 825mm |
| 30 | (3) Drawer slide height (Apex) 85mm. |
| 31 | Carrier for mounting components, such as PB & relay boxes. Cut section model for Pneumatic Components. |
| 32 | Hydraulic Trainer Kit, each consisting of the following Matching components and accessories Make - Hitachi / /Tecno / Power Tech / Cad Mech Engineering / Equator hydraulic |
| 33 | 1) Hydraulic Power Pack: - with (1) external gear pump having a delivery rate of 2.5 Imp. (apex) (a) 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230V AC) having starter capacitor and ON/OFF Switch and overload protection, |
| 34 | 2) Pressure relief valve adjustable from 0-60 bar |
| 35 | 3) Oil reservoir,> 5 liters capacity having sight glass, drain screw, air filter and P and T Ports. - 01 No. |
| 36 | II) Pressure relief valve Pilot Operated - 01 No. |
| 37 | III) Drip tray, steel 1160mmX760mm. - 01 No. |
| 38 | IV) Pressure Gauge Glycerin- damped, Indication range of 0-100 bar. - 01 No. |
| 39 | (V) Four-way distributor with five ports, equipped with a pressure gauge. - 01 No. |
| 40 | (VI) Double acting hydraulic cylinder with a control cam, piston diameter 16mm.,piston rod diameter 10mm,stroke length 200mm. - 01 No. |
| 41 | (VII) Suitable weight for vertical loading of hydraulic cylinder - 01 No. |
| 42 | (VIII) Mounting kit for weight for realizing pulling and bushing lead. - 01 No. |
| 43 | (IX) 3/2 way directional control valve with hand lever actuation - 01 No. |
| 44 | (X) 4/2 way directional control valve with hand lever actuation - 01 No. |
| 45 | (XI) 4/3 way directional control valve. Closed-center position, with hand lever actuation - 01 No. |
| 46 | (XII) Non return valve - 01 No. |
| 47 | (XIII) Pilot operated check valve pilot to open -01 No |
| 48 | (XIV) One way flow control valve with integrated check valve. - 01 No. |
| 49 | (XV) T-connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.) - 02 Nos. |
| 50 | (XVI) Profile Plate: - Anodized aluminum, 100x700mm with carriers, mounting frames and mounting accessories (To be fitted onto the hydraulic work station. - 01 set |
| 51 | Hydraulic Work Station with 40 square mm. aluminum profile legs, Wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide. |
| 52 | (1) Work Table size (Apex) L1200mm. X W900mm. XH900mm. with four castor wheel including two locale wheel at the front side. |
| 53 | Drawer Size (Apex) L460 mm X W495mm. X H158mm each, and overall size of drawer unit (Apex). L470mm X W495mm. X H825mm. |
| 54 | (3) Drawer slide height (Apex) 85mm. Cut Section Models for hydraulic Components. |
| 55 | D.C. Shunt Generator With Control Panel,2.5 KW, 220V & 3 phase Squirrel cage induction Motor, 5 HP,440V with control panel & star delta starter 1) DC Generator Make - Crompton / Bharat Ele. motor/ Kirloskar / Electronech / Power way systems 2) 3- Phase Induction Motor Make - 1. Crompton 2. Siemens,3. Hindustan electric motor. 3) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 56 | Motor-Generator (AC to DC) Consisting of : Squirrel Cage Induction Motor With Star Delta Starter And Directly Coupled To DC Shunt Generator And Switch Board Mounted With Regulator, Air Breaker, Ammeter, Voltmeter, Knife Blade Switches And Fuses, Set Complete With Case iron And Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Induction Motor Rating ;- 7.5 HP, 415V, 50 Cycles, 3Phase DC Shunt Generator Rating ;- 5KW,440V (Output voltage varies 110-440V) 1) DC Generator Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /ABB /Siemens 2) 3- Phase Induction Motor Make - 1. Crompton 2. Siemens,3. Hindustan electric motor. 3) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 57 | DC Series Motor coupled with control panel including spring balance load 2.5 KW; 220Volts 1) DC Series Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /ABB /Siemens 2) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 58 | DC Shunt Motor control panel including spring balance load 2.5 KW; 220Volts 1) DC Series Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /ABB /Siemens 2) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 59 | DC Compound Motor With control panel including spring balance load, Starter And Switch- 2.5 KW, 220Volts 1) DC Compound Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /ABB /Siemens 2) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 60 | Motor Generator(DC to AC) Set Consisting of - Shunt Motor With Starting Compensator And Switch Directly Coupled to AC Generator With Exciter and Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Shunt Motor Rating: - 5HP, 440V, A.C., Generator Rating: - 3-Phase, 4-Wire, 3 KVA, 400/230 Volts, 0.8pf, 50Cycles. 1) DC Shunt Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /ABB /Siemens 2) A. C. Generator Make - 1. Kirloskar 2. Crompton, 3. Siemens / ABB 3) Control Panel - Control Panel Accessories, Equipment and Protecting Accessories as per ISI standard. |
| 61 | AC Squirrel Cage Motor With Star Delta Starter and Triple Pole Iron Clad Switch Fuse with Mechanical Loa,5 HP,3-Phase ,415 Volts, 50 Hz 1) AC Squirrel Cage Motor Make - 1. Crompton, 2. Siemens, 3. Hindustan Elec. Motor /ABB / Siemens / BBL 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 62 | AC Phase-Wound Slip Ring Motor With Control Panel ,Starter and Switch 5 HP, 440 V, 3-Phase, 50 Hz 1) AC Phase-Wound Slip Ring Motor Make - 1. Crompton, 2. Siemens, 3. Havells motor /ABB / Simens / BBL 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI Standard |
| 63 | Universal Motor With Control Panel, Starter/Switch 240 Volt, 50 Hz, 1 HP 1) Universal Motor Make - 1. Crompton Greaves, 2. Hindustan Motor /Agni motors / Integrated Elect co 3. Siemens / Bosch power tool 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 64 | Synchronous Motor with control panel Accessories. Like starter, excitation arrangements,-3 Phase, 3 HP, 440V, 50Hz, 4 Pole, 1) Synchronous Motor Make - 1. Kirloskar, 2. Crompton, 3. Siemens / ABB 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 65 | Thyristor /IGBT Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement 1 HP (Complete Set) 1)Thyristor /IGBT Controlled D.C. Motor Drive Make - 1. Crompton Greaves 2. Siemens, 3. Electro Plasto control (EPC) /ABB / Siemens 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 66 | Thyristor / IGBT Controlled A.C. Motor Drive With VVVF Control 3 Phase, 2 HP (Complete Set) 1) Thyristor /IGBT Controlled A .C. Motor Drive Make - 1. Crompton Greaves 2. Siemens, 3. Electro Plasto control (EPC) /ABB /Siemens 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 67 | Single Phase Transformer, Core Type, Air Cooled, 1 KVA , 240/415 V, 50 Hz Make - 1. Siemens India 2. Kirloskar electric company Ltd 3. Bharat Heavy Electrical / Technovision Energy /Servokon /Sahara |
| 68 | Three Phase Transformer, Shell Type, oil Cooled with Delta / Star 3 KVA , 415/240 V, 50 Hz Make - 1. Siemens India 2. Kirloskar electric company Ltd 3. Bharat Heavy Electrical / Servocon / Kay pee |
| 69 | Electrical Machine Trainer – Suitable for Demonstrating The Construction And Functioning of Different Types of DC Machines And AC Machines (Single Phase And Three Phase). Should Be Fitted With Friction Brake Arrangement, Dynamo Meter, Instrument Panel And Power Supply Unit. 1) DC Machines And AC Machines Make - 1. Crompton 2. Kirloskar, 3. Siemens / Kitek Technology /Anshuman Tech 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 70 | Diesel Generator Set With Change Over Switch, Over Current Breaker and Water/ air-Cooled With Armature, Star-Delta Connections AC 3 Phase, 7.5 KVA, 415 Volt or higher rating Make - 1. Kirloskar 2. Cummins 3. Mahindra Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 71 | Pillar Electric Drill Machine Motorized 12-20mm. Capacity, 1 HP,440V,3 Phase, induction Motor with DOL starter, Bench Type 1) Electric Motor -1. Crompton 2. Kirloskar 3. Siemens 2) Drill Machine Piller - 1. Prakash Engitech Pvt. Ltd. 2. Sri Vigneshwara machine Tools. 3. Yogi Machine tools / Itco Engg/ Liberty Metal /Jeet Machine |
| 72 | A.C. Series Type Motor With Control Panel 1 HP, 240 V, 50 Hz 1) A.C. Series Type Motor Make - 1. Crompton 2. Kirloskar,3. Siemens /ABB / 2) Control Panel- Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 73 | Single Phase Capacitor Motor With Control Panel , Starter Switch 1 HP 240 Volt 50 Hz 1) Single Phase Capacitor Motor Make – 1. Crompton Greaves 2. Hindustan Motors 3. Siemens Motors / Kirloskar 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 74 | Manual Motor Coil winding machine - with step arbour Make - 1. Chawla and Chudhari Trading Co. Pvt 2. BGI Tools and Machine 3. Shree Esha winding Technology / Sigva / Signatt / Heaven |
| 75 | Ceiling fan coil winding machine - 250V,50Hz, 1- Phase with speed control Make - 1. Bharat Machine tools Ind. 2. Nishan Electric 3. Jangir Engineering work / Kisan Engg / Nilkanth Electric |
| 76 | Primary current injection set 220V,50Hz, 1-Phase,output current-200A(min) with timer Make - 1. SB Electro Tech. 2. Pragati Process Controls, 3. Scope T&M Pvt / Udeytaj electric / Motwane /KPM Engg |
| 77 | Stepper Motor With Digital Controller Make - 1. Ajanta Export Industries. 2. Anubhuti Power System 3. Bombay Electronics 4. Siemens 5. Schneider elect 6. ABB |
| 78 | Shaded Pole Motor Fractional HP, With Control Panel 240v 50Hz 1) Shaded Pole Motor Make - 1. Crompton Greaves 2. Hindustan Motors 3. Siemens Motors / Rexnord 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 79 | D.C. Compound Generator With Control Panel including Fitted Rheostat, Voltmeter, Ammeter & Breaker, 2.5 KW, 220 V & 3 Phase Squirrel cage induction motor 5 HP, 440 V with Control Panel & Star Delta Starter. Make - DC Compound Generator Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar / Powerol 3- phase 1) Induction Motor Make - 1. Crompton 2. Umiya Trading Company 3. Envirotech Engineers 2) Control Panel - Control Panel accessories, Equipment and Protecting Accessories as per ISI standard. |
| 80 | Used D.C. Generator Series, Shunt & Compound type for Overhauling practice. Make - 1. Crompton, 2. Bharat Ele. Motor 3. Kirloskar |
| 81 | Smart Meter 1- Phase - Smart Energy Meter 3 - Phase - Smart Energy Meter Make - 1.Genus Power Infrastructures Ltd 2.HPL Electric & Power 3.ELMAX India / L&T Electric |
| 82 | EV Charger 3 - Phase Input Make - 1. Tata Power 2. Mahindra Electric 3. Okaya / Delta Electronic / Servotech Power system |
| 83 | EV Charger (Home) 1 - Phase Input Make - 1. Tata Power 2. Mahindra Electric 3. Okaya / Delta Electronics |
| 84 | Work shop Main Control Panel With Voltmeter indicator Ammeter indicator 1. Maintenance 125 A 440V 2. Output Main switch - 16A - 08 , 32A - 08 63A - 02 Make - 1. Schneider elect 2. Siemens 3.ABB 4. L& T |
| 85 | D C Control Panel Income - 440V AC Output -12V ,24,110V, 240V, 440V, DC With indicator voltammeter Ampire Meter Make - 1. Schneider elect 2. Siemens 3.ABB 4. L& T |
| 86 | Welding Transformer With All Accessories ( 400A, OCV 60–100 V, 60% Duty Cycle) Make - Miller / Ador / Esab / I Bell |
| 87 | Welding Transformer (or) Inverter Based Welding Machine With All Accessories (300A , OCV 60 – 100 V, 60% Duty Cycle) Miller / Ador / Esab / I Bell |
| 88 | D.C Arc Welding Rectifiers Set With All Accessories (400 A. OCV 60 – 100 V, 60% Duty Cycle ) Make - Miller / Ador / ESAB / Vigor |
| 89 | GMAW Welding Machine 400A Capacity With Air Cooled Torch, Regulator, Gas Preheater, Gas Hose and Standard Accessories Miller / Ador /ESAB / Kemppi |
| 90 | AC/DC GTAW Welding Machine With Water Cooled Torch 300 A, Argon Regulator, Gas Hose, Water Circulating System and Standard Accessories. Miller /Ador / ESAB / I Bell / Lincoln |
| 91 | Air Plasma Cutting Equipment With All Accessories, Capacity to Cut 12 mm Clear Cut Make -Miller / ESAB / Hypertherm / Rali wolf / Technocard Plasma |
| 92 | Air Compressor Suitable for above Air Plasma Cutting 15 kw System Two stage compressor. 225 Ltr. Auto cut Tank Cap. 80 -100 Psi Make -ELGI /Allas Capco / Ingersoll Rand / premier |
| 93 | Auto Darkening Welding Helmet Make -L&T / Bell / ESAB / Miller |
| 94 | Spot Welding Machine to 15 KVA With All Accessories Make - Ador / ESAB/Artech / Micro weld |
| 95 | Portable Gas Cutting Machine capable of cutting Straight & Circular with all accessories Make - ESAB/ Pug NM / Koike India /Ador / Pentagon |
| 96 | Pedestal Grinder Fitted With Coarse & Medium Grain Size Grinding & Wheel Dia-300mm. Make -Elmaco / Bosch / vijay foundry equipment |
| 97 | Bench Grinder Fitted With Grain Size Silicon Carbide Green Grinding Wheel Dia 150mm Make - Elmaco / Bosch / Dewalt / Stanley corded |
| 98 | Power Saw Machine 18 \\"HP-300 \\" Blade Size - 450 mm Make -Bosch / Dewalt / Hitachi / KMI / Atlas mochal |
| 99 | Portable Drilling Machine Capacity 6mm. Make - Bosch / Dewal/ Hitachi |
| 100 | Oven Electrode Drying 0to 350c 10kg Capacity Make - Ador /Arcon /Senso heat |
| 101 | Die Penetrating Testing Kit. (Machine) Make - ESAB / Dubi-chek / Aerol / Magnaflux |
| 102 | Magnetic Particle Testing Kit. Make -ESAB / Canmay /mag flux / Magnaflux / Magkraft |
| 103 | Wedding Simulators For SMAW,GTAW,GMAN (Optional) Make - KRB Electronic soln Rewabsi / simbott |
| 104 | Water cooled induction welding/ Brazing machine 200-250 Amp., induction coil length 3 inch and 2.5 inch Make - ESAB /Micro tech induction /Foster induction /VEL I Braze snapet / welding world |
| 105 | Plastic welding machine with hot air gun temp. Display, variable temp., PE, PP& PVC sheet or pipe welding control with stand. Accessories. Make - ESAB / Leister / New Vimco Ltd /Ajanta ultra plast / I Bell / vormik VR/Branson Ultrascnies |
| 106 | AG4 Grinder 100 mm dia Make - Dewalt / Bosch /JK Supper / Metabo |
| 107 | Portable abrasive Cut Off Machine 107 mm Dia Make - Dewalt / Bosch / Ingco Hikoki /Mangalam / Century / Emboro |
| 108 | Hand shearing Machine cp cut 6 mm sheet & flat Make - Shakti / VMT/ M.S. Machine Tools/TL Pathak Group |
| 109 | Laser Cutting Machine Portable 50 mm laser Make - ESAB / Toumf / Amada / Parag Weld Algo laser/ Auto Mstack/Crealrty |
| 110 | Lathe S.S. & S.C. (All Geared head stock) with minimum specification as: 150mm Centre height to admit 750mm between Centre’s, Machine to be motorized and supplied with coolant installation, 4-jaw independent chuck 150mm., 3-jaw self-cantering chuck 150mm. Fixed Steady, travelling study, face plate, driving plate, 4 way tool post, quick change gear box for metric or British threads, live and dead centre with Taper Turning Attachment Motor Capacity 5.5 KW. MT 2 Revolving Centre QTY.2 No. Make - Kirloskar /HMT/ S Micrometric |
| 111 | Lathe Tool Room S.S. & S.C. . . . (All Geared head stock) with minimum specification as : 150mm center height, 1000mm between centers, Machine to be motorized and supplied with coolant installation, 4-jaw independent chuck 250mm.,3-jaw self-cantering chuck 150mm. Fixed Steady, Traveling Steady, Face Plate, Driving Plate 1-Way Tool Post, Draw in type Collets Set Up To 25 mm, 0.5 mm Relieving Attachment Motor Capacity 5.5 KW. MT 2 Revolving Centre QTY.2 No. Make - Kirloskar / HMT / S Micrometric |
| 112 | Grinding machine pedestal type D.E.200mm. Dia. Wheel with wheel guard and vision, Motor capacity - 0.75 KW. Make - Elmaco / Bosch / Ingco |
| 113 | CNC Lathe/CNC turn Centre Make - BFW / Moriseiki / Makino |
| 114 | 1) MACHINE CAPACITY a. Swing over bed - 350 mm or higherb. Turning diameter - 135 mm or higherc. Distance between centers - 250 mm or higherd. Maximum Turning Length - 200 mm or highere. Slant angle (bed or saddle) -30 degrees to horizontal or higherf. Cast Iron grade for bed and saddle - Grade 25 or equivalentg. Machine weight net - 1500 kg or higher |
| 115 | 2) SPINDLE a. Spindle nose -A2-4 / A2-5b. Bore through Spindle - 35mm or higherc. Maximum spindle speed - 4000 RPM or higherd. Spindle power, continuous - 3.7 kW or highere. Minimum spindle speed @ full power - 1200 RPM, or lowerf. Type of drive - AC servo spindle motor (digital)g. Chuck size -135 mm or higher. Chuck type h.3-jaw hydraulic, Hydraulic Power operatedI. Spindle bearing class - P4 classj. Front Bearing Dia. (ID) - 60 mm or higher |
| 116 | 3) AXESa. X - axis Travel - 100 mm or higherb. Z - axis Travel -200 mm or higherc. Programmable feed rate- X & Z -10 - 10000 mm/mind. Minimum programmable command -X & Z - 0.001 mme. Rapid traverse - X & Z - 20 m/min or higherf. Type of drive - X & Z - AC servo motorg. Motor torque - Z axis - 3Nm or higherh. Motor torque - X axis - 3Nm or higher with brakeI. Ball screw - Z & X axes (diameter x pitch) - 25 x 10 mm or higherj. Ball screw finish - Z & X axes - Hardened and Groundk. Ball screw class- Z & X axes - Pre-loaded with C3 or betterl. Guide way type - Z & X axes - Antifriction linear motion guide waym. Guide way size - Z & X axes - 25mm or highern. Guide way precision - Z & X axes - P class |
| 117 | 4) TURRETa. Bi-Directional Tool Turret - Electromechanical/Servo/Hydraulicb. No. of Tools - 8 Nos. or higherc. Tool shank size - 20 x 20 mm or higherd. Maximum boring bar diameter - 25 mm or higher |
| 118 | 5) TAIL STOCKa. Quill Diameter - 65 mm or higherb. Quill Stroke - 70 mm or higherc. Quill Taper- MT-4 or higherd. Quill actuation - Hydraulice. Tail stock base travel manual - 150 mm or higherf. Thrust (Adjustable) - 300 Kg for higher |
| 119 | 6) COOLANT/LUBRICATION/HYDRAULIC a. Coolant tank Capacity - 100 Liters or higherb. Coolant pump motor - 0.37 kWc. Coolant pump out put - 20 LPM or higherd. Lubrication type - Automatic centralized lubricatione. Lubrication Tank Capacity 3 Liter or Higher f. Hydraulic pump discharge - 8 LPM or higherg. Hydraulic tank capacity - 30 Liters or higherh. Hydraulic system pressure maximum -30 Bar or higher |
| 120 | 7) ACCURACY as per ISO 230-2a. Positioning accuracy X & Z axes - 0.012mmb. Repeatability X & Z axes - ± 0.007mmc. Geometrical Alignment - ISO 13041-Part 1d. Accuracy of finish test piece - ISO 13041-Part 6 |
| 121 | 8) CNC SYSTEM a. Control System – FANUC / Siemens b. System resolution - 0.001 mm c. Motors & Drives - Compatible with CNC controllers mentioned aboved. Tool number display - On machine operator panele. Machine control panel - Feed rate, spindle speed override knobf. MPG (Manual pulse generator) - On machine operator panelg. CNC features - Graphic Simulation, Programming help, Tool Offsets, MDI, Absolute/ Incremental Positioning, Pitch error compensation |
| 122 | 9) POWER SOURCEa. Mains supply (± 10 %) - 415 V, 3 Ph., 50Hz b. Total connected load requirement - Approx. 15 kVA |
| 123 | 10) STANDARD EQUIPMENTa. Voltage Stabilizer 15 kVA b. Air conditioning unit for electrical Cabinet - 1 No. Backup CD for PLC Ladder Logic - 1 No. d. Machine lighting - 1 No. e. Levelling pads and jacking screws - 4 No. f. Operation manual - 1 No. g. Maintenance manual - 1 No. h. Installation kit - 1 No. I. Maintenance tool kit - 1 No. j. 6 rack trolley (Size 25\\"x22\\"x45”) with lock - 1 No. k. Machine guarding with safety compliance - 1 No. |
| 124 | 11) MAKES OF CRITICAL MACHINE TOOL COMPONENTSa. Linear Motion Guide ways - HIWIN/THK/PMI/STARb. Ball Screws - HIWIN/THK/TSUBAKI/PMI/STAR/HMT/NSKc. Spindle Bearings - RHP/NSK/FAG/SKF/NRBd. Turret - PRAGATI/BARUFFALDI/SAUTER/DUPLOMATICe. Hydraulic Chuck & Cylinder - GMT/ KITAGAWA / AIRTECH /PRAGATI / ROHMf. Hydraulic Power Pack - YUKEN/FLUID/REXROTHg. Panel AC - WERNER FINLEY/RITTAL/LEXTECNOIDh. Stabilizer - NEEL/SERVOMAX /CONSUL/FARMAX/EQUIVALENTI. Lubrication- CENLUBE/DROPCO/EQUIVALENTj. Coolant Pump - RAJAMANE/GRUNDFOSk. Cutting tools and holders - SANDVIK/TAEGUTEC/ KENNAMETAL /SECO/ISCAR/MITSUB ISHI |
| 125 | 12) Cutting tools & tool holders 1. External turning holder, insert type, MWLNL - Holder 4Qty. (Insert WNMG 40 Nos.)2. External turning holder, insert type, MVJNL - Holder 4Qty. (Insert VNMG 20 Nos.)3. External turning holder, insert type, PDJNR - Holder 4Qty. (Insert DNMG 20 Nos.)4. Threading Holder - External, LH - Holder 4Qty. (Insert 0.5 to 2 30 Nos.)5. Threading Holder - Internal, LH - Holder 4Qty. (Insert 0.5 to 2 30 Nos.)6. Grooving Holder External, LH - Holder 4Qty. (Insert 3mm 30 Nos.)7. Grooving Holder Internal, LH - Holder 4Qty. (Insert 3mm 30 Nos.)8. Parting off Holder for insert width 2 mm, LH - Holder 4Qty. (Insert 2mm 30 Nos.)9. Boring holder SCLCL for minimum bore dia. 12mm - Holder 4Qty. (Insert WCMT 60 Nos.) 10. Boring holder SCLCL for minimum bore dia. 16 mm - Holder 4Qty. (Insert CCMT 60 Nos.) 11. Internal grooving holder LH, for minimum bore dia. 12 mm - Holder 4Qty. (Insert 2mm 30 Nos.) 12. Internal threading holder LH, for minimum bore dia. 12 mm - Holder 4Qty. (Insert W MM 30 Nos.) 13. Insert drill 12.7 mm - Holder 4Qty. (Insert Suitable 30 Sets.) 14. Reducing sleeves for internal holders - Dia 12 and 16 mm - 2 sets 15. Centre drill HSS A 2.5 x 6.3 - 6 Qty. 16. Twist drill HSS straight shank, Dia 6,8,10,12 mm - 6 sets 17. Collets suitable for the above drills - 2 sets 18. Collet Holder - 4 Nos.19. Boring bar holder - 3 No’s C.N.C Lathe Machine With Accessories. 1. D- LIST OF ADDITIONAL MACHINES, TOOLS AND EQUIPMENT FOR CNC TURN CENTER : D) Digimatic Electronic Vernier Caliper 200 mm. - 2 Nos. E) Digimatic electronic outside Micro meter (0 to 25 mm & 25 to 50 mm) LC 0.001 mm. - 1 No’s each. |
| 126 | Desktop Computers Compatible to run Simulation Software with LAN facility. Dell / Lenovo / HP Specification – CPU – 64 Bit i7 OR Latest processor Speed – 3GHz or Higher Ram 12 GB DDR - III or Higher, Wi-Fi Enabled. Network Card – Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 21 Inch.) Licensed Operating System and Antivirus compatible with Trade related software. 01 TB Hard Disk Nvidia Graphic Card |
| 127 | SS and SC Centre lathe (all geared) with minimum specification as: Centre height 150 mm and Centre distance 750mm along with 4 jaw chuck, self-centering chuck, auto feed system, safety guard, motorized coolant system and lighting arrangement, set of lathe tools, lathe carriers Make - Kirloskar /HMT/ S Micrometric |
| 128 | Pillar drill machine (All geared) 0-25mm drill holding capacity with drill chuck & keys. Make - IFCO/ SKP / Energi |
| 129 | Cylindrical External Grinding Machine fully motorized with dressing arrangement and supplied with face plates and driving dogs, 3 jaw self-centering chuck,4 jaw independent chuck, tail stock assorted center pump with tank and pipe fittings spanners and grease gun (each machine to be supplied with assorted grinding machine for general purpose work with internal grinding attachment) with minimum specification as: To accommodate 750mm job with center height 150mm. Wheel diameter x width=300x25mm Make - HMT–K 130 U / S-Micrometic / Hi Life |
| 130 | Radial Drilling Machine 32mm Diameter with Std. Accessories. Drill chuck & Plain Machine vice 250 mm Make - HMT / BFW / Batliboi |
| 131 | Lathe Tool Room S.S. & S.C. . . . (All Geared head stock) with minimum specification as : 150mm center height, 1000mm long with 3-jaw, 4-jaw chuck auto feed system, taper turning attachment, Coolant pump, safety guard, and machine light arrangement. Make - Kirloskar / HMT / S Micrometric |
| 132 | Rockwell Hardness Testing Machine Digital Type With Standard Accessories / digital Type Make - Mitutoyo/ Sagar/ Sinowon / Saroj / Sai DRO |
| 133 | Profile Projector (5 micron) Re solution 0.001mm Projection Scream - effective diameter 300 mm, rotation angle: +/- 360 degree angle Reading - 0.01 degree or 1 (commutative) Projection lens - 10 x lens group (standard arrangement) 20x50x100 x is set as on option. measuring range - 200x200 mm quickly move x, y axes, power : 220 VAC Make - Mitutoyo / Nicon / Metzer |
| 134 | Co-ordinate measuring machine (5 micron) measuring Range 500x700x500mm Make - Nicon / Mitutoyo / Devine Technology |
| 135 | Fly Press (any model Minimum 12 tons capacity) Make - Taj Enterprises / Bharat machinery and Spares / Orient Machine Tool |
| 136 | Power press m/c (Hydraulic) Minimum 02 tons capacity standard and required optional accessories Make - Foreman / Amino / Omkar Enterprises |
| 137 | Auto Cad & Cam Latest Version - For Training Purpose Make - Autodesk |
| 138 | Solid Works / Any latest - Latest Version - For Training Purpose Make - Dassasult System Solid Work Corporation |
| 139 | Smart Touch Screen Panel For Smart Class Room (65\\") USB Connector, LED Interactive Pen, Mounting, User’s Manual Electronics File Make - Samsung / Smart Guru / Vincon System |
| 140 | Multimedia based simulator for CNC technology & interactive CNC Part Programming Software For Turning & Milling with virtual machine. Operation & simulation using popular operation. Control system such as Fanuc, Siemens, etc. (web-based or licensed based.) - For Training Purpose Make - Cad Mech / Indiasoft / Fanuc / KRB Electronic Solution |
| 141 | CNC Vertical Machining Centre With Std. Accessories Make - BFW / Moriseiki / MakinoSPECIFICATION |
| 142 | 1) MACHINE Capacity a)Table size - 500x250 or higher MM b) Max. load on table 150 or higher c)T slot dimension (N x W x P) MM 3x14x100 or higher d)Table height from floor 800 ~ 900 MM e) Cast Iron grade for bed and saddle Grade 25 or equivalent f)Machine net weight 1500 or higher KG |
| 143 | 2) SPINDLE a) Spindle nose BT30 b) Minimum distance (spindle nose to table)100 - 150 mm d) Maximum spindle speed 6000 or higher RPM e) Spindle power, continuous 3.7 or higher kW f) Type of drive AC servo spindle motor (digital) g) Spindle bearing class P4 h) Front Bearing Dia. (ID) 50 or higher mm |
| 144 | 3) AXES a) X - axis Travel 300 or higher mm b) Y - axis Travel 250 or higher mm c) Z - axis Travel 250 or higher mm d) Rapid traverse - X/Y/Z 20/20/20 or higher m/min e) Minimum programmable command X/Y/ Z - 0.001 mm f) Programmable feed range - X, Y & Z axes 10 - 10000 mm/min g) Type of drive AC servo motor h) Motor Torque - X & Y axes 3 or higher Nm I) Motor torque - Z axis 6 or higher with brake Nm j) Ball screw - X,Y& Z axes (diameter x pitch) 25 x 10 or higher mm k) Ball screw finish - X, Y & Z axes Ground and hardened l) Ball screw class - X, Y & Z axes Pre-loaded with C3 or better m) Guide ways - X, Y & Z axes Antifriction linear motion guide way n) Guide ways size - X, Y & Z axes 25 or higher mm o) Guide way precision - X, Y, & Z axes P Class |
| 145 | 4) AUTOMATIC TOOL CHANGER a) Number of tool pockets 8 or higher No’s b) Max tool diameter 80 or higher mm c) Tool selection Bi-directional d) Tool shank type BT30 e) Tool weight max 2.5 for BT30 f) Tool length max 100 ~150 for BT30 g) Tool change time (chip to chip) 5 or lower sec h) Tool clamp & unclamp Disc Spring & Hydro-Pneumatic |
| 146 | 5) ACCURACY as per ISO 230-2 a) Positioning accuracy for X,Y & Z axes 0.012 mm b) Repeatability for X,Y & Z axes ±0.007 mm c) Geometrical Alignment ISO 10791-Part 1 d) Accuracy of finish test piece ISO 10791-Part 7 |
| 147 | 6) CNC SYSTEM a) Control System - FANUC b) Motors & Drives Compatible with CNC controllers as mentioned above c) System resolution 0.001 mm d) Tool number display On machine operator panel e) Machine control panel Feed rate, spindle speed override knob f) MPG (Manual pulse generator) On machine operator panel g) CNC Features Graphic Simulation, Programming help, Tool Offsets MDI, Absolute/Incremental Positioning, Pitch error compensation |
| 148 | 7) COOLANT/LUBRICATION a) Coolant tank Capacity 100 or higher Litres b) Coolant pump motor 0.37 kW c) Coolant pump output 20 or higher l pm d) Lubrication type Automatic centralized lubrication e) Lubrication tank capacity 3 or higher Liters |
| 149 | 8) AIR COMPRESSOR FOR TOOL UNCLAMP a) Compressor Type Screw type with dryer, filter & air receiver b) Tank capacity 200 or higher liters c) Air Flow 10 or higher CFM d) Pressure 7 max. bar |
| 150 | 9) POWER SOURCE a) Mains supply (± 10 %) 415 V, 3 Ph., 50Hz b) Total connected load requirement Approx. 15 KVA |
| 151 | 10) STANDARD EQUIPMENT a) Voltage Stabilizer 15 KVA b) Air conditioning unit for electrical cabinet As required c) Backup CD for PLC Ladder Logic 1 no. d) Machine lightning 1 no. e) Levelling pads and jacking screws 4 nos. f) Operation manual 1 no. g) Maintenance manual 1 no. h) Installation kit 1 no. I) Maintenance tool kit 1 no. j) 6 rack tool trolley (Size 25\\"x22\\"x45\\") with lock 1 no. h) Machine guarding with safety compliance 1 no. |
| 152 | 11) MAKES OF CRITICAL COMPONENTS a) LM Guide ways - HIWIN/THK/PMI/STAR b) Ball Screws - HIWIN/THK/TSUBAKI/PMI/STAR/HMT/NSK c) Spindle Bearings - RHP/NSK/FAG/SKF/NRB d) ATC - PRAGATI/GIFU e) Panel AC - WERNER FINLEY/RITTAL/LEXTECNOID f) Stabilizer - NEEL/SE RVOMAX/CONSUL/FARMAX g) Lubrication - CENLUBE/DROPCO h) Coolant Pump - RAJAMANE/GRU NDFOS I) Cutting tools and holders - Sandvik/Taegutec/Ken Nametal/Seco/Mitsubishi j) Air compressor (capacity: 6 kg/cm2 - 300 GODREJ/ELGI/KAESER/ATLASCOPCO l pm min.) |
| 153 | 12) Cutting Tools & Tool Holders (for BT30 as per machine supplied) A. Face mill 45 degree 63 mm. insert type - 4 No. Suitable inserts - 15 No. b. Face mill square shoulder 50 mm. insert type - 4no. Suitable inserts - 15 No. C. Twist drill HSS straight shank 6, 6.7, 8.5, 9.7 - 4 No. d. Spot drill Carbide, dia. 8 mm X 90° - 4 No. Suitable inserts - 60 No. e. Drill insert type - 16 mm - 4 No. Suitable inserts - 30 No. f. Solid carbide Twist drill straight shank - 8 mm - 4 No. g. Solid carbide End mill straight shank - 10, 12 mm dia. - 4 No. h. End mill insert type straight shank - 16 mm dia. - 4 No. Suitable inserts - 30 No. I. Machine Taps HSS - M8, M10 - 4 No. j. Solid carbide Reamer straight shank - 10 mm - 4 No. k. Finish boring bar dia. 20 to 25 mm- 3 No. Suitable inserts – 30 No L. Holder for face mills (Adapter) - 4 No. Suitable Incert - 60 Nos. m. Collets for above drills, reamers, end mills - 02 sets n. Collet holder suitable for collets - 4 No. o. Side lock holder for 16 mm insert drill - 2 No. p. Machine vice 0-150 mm range - Mechanical type - 1 No. q. C spanner for tightening tools in holder - 2 No. r. Magnetic dial stand - 2 No. S. Mallet - 02 No. t. Tap wrench - 2 No. u. Hands tools set ( spanners, Allen keys, etc.,) - 1 box v. T Nuts, Strap clamps, Clamping Nuts and studs - 2 set |
| 154 | Three / Four Door Refrigerator (Inverter type) Specification - 300 Liter with HC-600 a Gas. (1 each) Make - Godrej / Whirlpool / LG |
| 155 | Core Drill Machine Specification - Up to 2\\" to 2.5\\" Hammer chiseling bit 1500 Watt Make - Crompton / Power Hours / Bosch |
| 156 | Duct able Split A/C reciprocating compressor Specification - Cap 1.5 ton with R-22 Evapora(4 Copper) Make - Blue star / Voltas / Daikin |
| 157 | Recovery Unit with Cylinders Specification - CFC-HFC,HCFC, - 1 each Cylinders Make - Trust Hal / Robin air RG-3 / Rishabh Enterprises |
| 158 | Decibel Meter 03 to 100 DB Make - Cadrim / Bosch / Generc |
| 159 | Descaling Pump set with stainless steel impeller and accessories (1/2 HP) Make - Bosch / Crompton / Robin air |
| 160 | Fan Coil Unit with water Valves Specification - 2 way & 3 way Valves (02 Ton) Make - Nutech Zeco / Blue star / Voltas |
| 161 | Circulating Water Pump 0.5 HP with stainless steel, tank capacity inlet/outlet provision Make - Sharp / Lubi / Crompton |
| 162 | Water cooler storage type HFC-134a Specification - 200 litter Reciprocating Compressor. Make - Blue Star /Voltas / Usha |
| 163 | Package A/C Air cooled type with open type reciprocating compressor Fins type condenser (05 Ton) Make - Blue Star / Voltas / Daikin |
| 164 | Bus A/C Tutorial Model Make - Estern Air / Tata Motors / cool ways. Ltd |
| 165 | Automatic Ice Coober Machine Specification - 5 kg/hr., Ice Cube - Material Stainless Steel Make - Godrej / Voltas / Blue star |
| 166 | Walk in cooler PUF insulated cold room Specification - 01 Ton, 6x5x8 foot, Cold Room Temp - 0 to 5° C degree. Air Cooled Evaporator & condenser Copper tubing. Make - Unicool / blue Star / Voltas |
| 167 | Shell tube type Dx chiller Specification - 5 Ton Material – Copper Tubing only Make - Voltas / Blue Star / Carrier Please Enable Macros to View BoQ information |
