Tender For Annual Plan-Erattupetta Muncipality Project No : 183/25-26-Fixing Of Motor And Accessories In Ismailparambu Area Borewell In Ward 27 -General Civil Work, Erattupetta-Kerala
TDR : 54501289
Tender Notice
BOQ
1 Days Left
Erattupetta
Kerala
Tender For Annual Plan-Erattupetta Muncipality Project No : 183/25-26-Fixing Of Motor And Accessories In Ismailparambu Area Borewell In Ward 27 -General Civil Work
Name of Work:- Annual Plan-Erattupetta Muncipality Project No : 183/25-26-Fixing of motor and accessories in ismailparambu area borewell in ward 27 -General Civil Work
Sl. No.
Item Description
1
Pump and related works
2
OD495182/2025-2026:Supplying and fitting and testing of 1.5 HP submersible borewell multistage pump of 15-20 stages, fittings, including installation cost, and with adequate wiring starter. Installed as directed by the engineer in charge.
3
OD495183/2025-2026:Supplying and fixing of 32 mm HDPE pipe , PE QOO, PN 10 with necessary connections
4
7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
5
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 gradedstone aggregate 40 mm nominal size derived from natural sources)
6
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
7
13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
8
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
9
OD505652/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10
OD495181/2025-2026:Supplying ,fabricating PVC door with frame in locality available best quality including cost of all fittings, labour charges etc complete Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
