Tender For Implementation Of Aksharam Museum - Phase Ii,Iii & Iv ( Civil & Plumbing Works), Kottayam-Kerala

TDR : 54499966

Tender Notice
BOQ

16 Days Left

Kottayam , Kerala

Tender Brief : Tender For Implementation Of Aksharam Museum - Phase Ii,Iii & Iv ( Civil & Plumbing Works)

Document Fees
₹ 10000 /-

EMD
₹ 200000.0 /-

Tender Value
₹ 9.82 Crore /-

Submission Date
25-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	MUSEUM BUILDING- CIVIL WORK15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
2	15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B work.
3	5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
4	5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum
5	5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide.
6	5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
7	5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
8	5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
9	50.6.1.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
10	11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
11	11.47.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
12	13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand )
13	13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
14	13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
15	13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
16	13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
17	50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
18	50.6.1.3 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
19	50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
20	13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
21	13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
22	11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kgof resin per kg). including filling /grouting and finishing complete as per direction ofEngineer-in-charge.Size of Tile 600x600 mm
23	11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles
24	8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
25	8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
26	8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade
27	9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
28	9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
29	9.122.1 Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, castmonolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames
30	9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
31	21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )
32	21.1.2.3 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)
33	21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.205 x 19 mm
34	21.13 Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete
35	21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination onboth sides
36	21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
37	22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
38	9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
39	13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
40	4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
41	22.6 Providing and laying water proofing treatment on roofs of slabs by applying cementslurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
42	13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
43	10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
44	OD264042/2025-2026 Providing and fixing of 120 Minutes Fire Rated Door with vision panel as per design itent. Door Skin Material GI sheet as per IS 277/Stainless steel 304 grade Including cost and conveyance of all fittings (Ball Bearing Hinges, vision panel 200x300)mm door closer etc.) as per direction of engineer in charge.120x2400mm
45	OD264046/2025-2026 \\"Flush Door( Laminate Finish ): Providing & Fixing flush door with frame as per approved drawing. Door frame and shutter frameworks finished with 19 mm plywood (IS 710 Grade,BWP Prestige/EG Bond/Equivalent). Both sides of the frame to be panelled with 9 mm plywood and finished with 1mm thick laminate finish ( Greenlam/Century/Newmika/Merinolam/equivalent) using suitable adhesive (Fevicol/Equivalent). Complete using necessary SS Hinges, SSTower bolts, Mortice lock with cylinder lock, Lever handle, Door closer, stopper (Hafele/ Hettich/equivalent) etc., Including cost and conveyance of all materials labour charges etc. complete as per drawing.\\"
46	OD264054/2025-2026 Providing and fixing S.S. tower bolt 6\\" with necessary screws etc. complete ( Derived from 9.63.3)
47	OD264071/2025-2026 Providing and anchoring of rebars 8mm dia at a depth of minimum 10 times the diameter with chemical (Fischer V Plus 360/equvalent) for anchoring rebar of approved quality and make in to the existing RCC stucture (beam, column, slab) including all material labour charges etc.
48	OD264072/2025-2026 Providing and anchoring of rebars 12mm dia at a depth of minimum 10 times the diameter with chemical (Fischer V Plus 360/equvalent) for anchoring rebar of approved quality and make in to the existing RCC stucture (beam, column, slab) including all material labour charges etc.
49	OD264073/2025-2026 Providing and anchoring of rebars 16mm dia at a depth of minimum 10 times the diameter with chemical (Fischer V Plus 360/equvalent) for anchoring rebar of approved quality and make in to the existing RCC stucture (beam, column, slab) including all material labour charges etc.
50	OD264074/2025-2026 Labour for Cleaning & shifting of existing materials and making site ready for work.
51	OD264108/2025-2026 \\"Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of plywood to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 9 mm thick plywood with 1 mm thick laminate finish\\"
52	5.9.19 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
53	5.11.1 Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
54	OD264196/2025-2026 Providing and fixing SS hook and eye : 200mm for windows & ventilators Derived from 14.35.1
55	MUSEUM BUILDING- PLUMBING WORKS8.10.2Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade
56	18.17.4Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :50 mm nominal bore
57	18.21.2.1Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
58	18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank.
59	18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore
60	18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 893115 mm nominal bore
61	18.7.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50mm nominal dia pipes
62	18.76.1Cutting holes up to 30x30 cm in walls including making good the same:Withcommon burnt clay F.P.S. ( non modular ) brick
63	18.8.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes
64	18.8.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.25 mm nominal dia pipes
65	18.8.4Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.32 mm nominal dia pipes
66	18.9.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work50 mm nominal dia pipes
67	17.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approvedquality) complete with 6 mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete.
68	17.71Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and112 mm distance from wall of standard shape with bracket of the same materials withsnap fittings of approved quality and colour, weighing not less than 105 gms
69	12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cmdiameter and weighing not less than 440 grams.
70	50.17.1.2Supplying and fixing CP Towel rod 45cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge.
71	50.18.7.5.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 40 mmdia 6Kgf/cm2 - Internal work - Exposed on wall
72	50.18.8.3.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 25 mm pipe10kgf /cm2
73	50.18.8.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 50 mm pipe6 kgf/cm2
74	50.18.9.21.7Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 75 mm dia Vent cowl
75	50.18.9.22.8Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,including jointing with PVC solvent cement -110 mm dia Vent cowl
76	17.28.2.1Flexible pipe32 mm dia
77	OD260956/2025-2026\\"Supplying and fixing Health faucet ABS body with wall hook and 1 metre SSbraided rubber hose pipe in position EWC cruse set & seat cover ( Cera S1013200,B1520118)wall hung wash basin (Cera S2040101)Elbow operated pillar cock (Cera - F9030101),4 wall mounted Grab bars 600mm long(Cera - B2210106)1wall mounted Hinged rail 600x100 mm (Cera - B2210107)
78	OD260958/2025-2026\\"Providing and fixing CP brass Self closing angle cock pressmaticfor urinal with wall flange and 200 mm long connecting pipe
79	OD260959/2025-2026\\"Supplying and fixing white glazed earthenware Urinal of 430x260x350 mm ornearest size (Indian make best quality) fixing with TW plugs and screws embedded inCM, providing 40mm CP waste ? 1no, including cutting, making good the walls andfloors etc. complete.
80	OD260960/2025-2026\\"Providing and fixing floor mounted, white vitreous china Two piece water closet ofapproved make and size including seat cover, cistern with twin flush fittings withflow rate 8% less than base line flow rate of 6/3L flush ,nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge.
81	OD261548/2025-2026\\"Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials withgood quality solvent cement and teflon tape and fixing the same to line, plumb andlevel on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete : 75 mmdiameter
82	OD261549/2025-2026\\"Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials withgood quality solvent cement and teflon tape and fixing the same to line, plumb andlevel on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete : 110 mmdiameter
83	OD261552/2025-2026\\"Cutting holes up to 15x15cm or nearest size in R.C.C. floors and roofs for passingdrain pipe etc. and repairing the hole after insertion of drain pipe etc. with cementconcrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominalsize) including non shrink grout and epoxy resin based putty followed by testing so asto make the core leak proof
84	OD261553/2025-2026\\"Providing and fixing SS grating of approved quality. Rectangular type with openablecircular lid : 150 mm nominal size square 100 mm diameter of the inner hinged roundgrating
85	OD261554/2025-2026\\"Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali includingcutting open, boring through RCC slabs and making good the damages.
86	OD261563/2025-2026\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC SDR 11) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per directionof Engineer in Charge. Concealed work including cutting chases and making good thewalls etc :40 mm nominal outer dia .Pipes.
87	OD261564/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials for Rainwater with good quality solvent cement and teflon tape and fixing the same to line,plumb and level on the sides of ducts, walls, suspended to slabs as the case may be byusing slotted rails , U clamps, 8mm threaded rods and other required materialsincluding drilling holes, making good the walls, cleaning etc. and finishingcomplete:110mm diameter
88	OD261566/2025-2026\\"Supply, Erection, Testing and Commissioning of centrifugal monoblock pump(Transfer pump) set capable of lifting 100 lpm of water against a total head of 30m - 2nos (1 working and other standby) with accessories such as 50mm non return valve -2nos, 50mm full way wheel valve - 2nos, pump panel having MCB, digital diaplay ofvoltage and current, Indicating lamps, manual switches, digital function capable ofdry run prevention and automatic interchange system all enclosed within a singlepanel(Approximately 1.5HP, Filling time 15min, For domestic water)
89	OD261567/2025-2026\\"Supplying and fixing of heavy duty slotted rail, full threaded rod, U bolts, universalclamps, nuts and washers for clamping pipes, floor traps etc.in ducts and belowceiling
90	OD261570/2025-2026\\"Supplying and fixing 8mm anchor fastner for fixing threaded rod in position
91	OD261572/2025-2026\\"Supplying and fixing 10mm anchor fastner for fixing threaded rod in position.
92	OD261573/2025-2026\\"Providing and fixing SS drain cover of approved quality. Rectangular type withopenable circular cover : 125 mm nominal size square 100 mm diameter of the innercover (for urinals)
93	OD261579/2025-2026Dismantling existing rain water inlets mouths and remove them from the rain waterpipe without damaging the pipes as instructed by the engineer in charge
94	LIBRARY BLOCK- CIVIL WORKS2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
95	2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
96	2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
97	4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources)
98	4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).
99	4.2.8 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
100	4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
101	5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
102	5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum
103	5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
104	5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide
105	5.9.19 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
106	5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
107	5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
108	5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
109	5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
110	5.9.7 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
111	50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
112	50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
113	50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
114	50.6.1.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
115	50.6.1.3 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
116	50.6.1.7 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
117	50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
118	11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm
119	11.46.2 Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
120	11.47.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
121	11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
122	11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles
123	10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube
124	10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
125	8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
126	8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work,including necessary holes for pillar taps etc. including moulding, rubbing andpolishing of cut edges etc. complete.
127	8.9.1.2Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing inwhite cement complete.Granite of any colour and shade
128	13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
129	13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
130	13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
131	13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
132	13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
133	13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
134	9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame
135	9.122.1 Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
136	9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
137	9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
138	13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
139	21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )
140	21.1.2.3 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)
141	21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.205 x 19 mm
142	21.13 Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete
143	21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
144	21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
145	22.23.1 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerincharge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
146	22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroometc., by applying cement slurry mixed with water proofing cement compoundconsisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to aircure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed withwater proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to aircure for 4 hours followed with water curing for 48 hours. The rate includespreparation of surface, treatment and sealing of all joints, corners, junctions of pipesand masonry with polymer mixed slurry
147	22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
148	5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum
149	9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
150	25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality asper grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of60-80 microns conforming to AAMA 2604 of required colour and shade as approvedby the Engineer-in-Charge. ( The item includes cost of material such as cleats,sleeves, screws etc. necessary for fabrication of extruded aluminium frame work.Nothing extra shall be paid on this account).The weight of aluminum extruded sectionshall be taken for purpose of payment
151	OD263561/2025-2026 Applying Antitermite treatment on flooring using second generation chemicals which is ecofriendly and nil harm ful for human beings and pet animals which control the pests including all cost and labour charges etc complete
152	OD263746/2025-2026 Providing and fixing SS hook and eye : 200mm for windows & ventilators Derived from 14.35.1
153	OD263747/2025-2026 Providing and fixing S.S. tower bolt 6\\" with necessary screws etc. complete ( Derived from 9.63.3)
154	OD263852/2025-2026 \\"Flush Door( Laminate Finish ): Providing & Fixing flush door with frame as per approved drawing. Door frame and shutter frameworks finished with 19 mm plywood (IS 710 Grade,BWP Prestige/EG Bond/Equivalent). Both sides of the frame to be panelled with 9 mm plywood and finished with 1mm thick laminate finish ( Greenlam/Century/Newmika/Merinolam/equivalent) using suitable adhesive (Fevicol/Equivalent). Complete using necessary SS Hinges, SSTower bolts, Mortice lock with cylinder lock, Lever handle, Door closer, stopper (Hafele/ Hettich/equivalent) etc., Including cost and conveyance of all materials labour charges etc. complete as per drawing.\\"
155	OD263859/2025-2026 \\"12mm toughened glass door: Providing and fixing door of 12mm thick Toughened glass door (Saint Gobain/Equivalent) with (dorma kaba/Equivalent) patch fittings (Floor Spring, Top patch, pivot Pin, Bottom patch, Corner lock, Handle).Including all cost and conveyance of materials, labour etc complete.\\"
156	OD263872/2025-2026 Providing and fixing of 120 Minutes Fire Rated Door with vision panel as per design itent. Door Skin Material GI sheet as per IS 277/Stainless steel 304 grade Including cost and conveyance of all fittings (Ball Bearing Hinges, vision panel 200x300)mm door closer etc.) as per direction of engineer in charge.120x2400mm
157	4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
158	LIBRARY BLOCK-PLUMBING WORKS8.10.2Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade
159	18.17.1Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
160	18.17.1AProviding and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :20 mm nominal bore
161	18.17.2Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :32 mm nominal bore
162	18.17.3Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :40 mm nominal bore
163	18.17.4Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :50 mm nominal bore
164	18.17.5Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :65 mm nominal bore
165	18.21.2.1Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
166	18.32.1Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation,foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mmnominal size) and inside plastering with cement mortar 1:3(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design:With common burnt clay F.P.S (non modular) bricksof class designation 7.5
167	18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore
168	18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 893115 mm nominal bore
169	18.7.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal dia pipes
170	18.7.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25mm nominal dia pipes
171	18.7.4Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32mm nominal dia pipes
172	18.7.5Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40mm nominal dia pipes
173	18.7.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50mm nominal dia pipes
174	18.76.1Cutting holes up to 30x30 cm in walls including making good the same:Withcommon burnt clay F.P.S. ( non modular ) brick
175	18.8.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes
176	18.8.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.25 mm nominal dia pipes
177	18.8.4Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.32 mm nominal dia pipes
178	18.9.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solventcement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work20 mm nominal dia pipes
179	18.9.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solventcement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work25 mm nominal dia pipes
180	18.9.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work50 mm nominal dia pipes
181	17.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approvedquality) complete with 6 mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete.
182	17.7.4Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Flat backwash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
183	17.71Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and112 mm distance from wall of standard shape with bracket of the same materials withsnap fittings of approved quality and colour, weighing not less than 105 gms
184	12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cmdiameter and weighing not less than 440 grams.
185	19.16Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulatedas per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimumcross section as 23 mm x 25 mm and over all minimum length 263 mm and width as165 mm with minimum 112 mm space between protruded legs having 2 mm tread ontop surface by ribbing or chequering besides necessary and adequate anchoringprojections on tail length on 138 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and havingmanufactures permanent identification mark to be visible even after fixing includingfixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design
186	19.32.1Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honeycomb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete asper standard design.With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5
187	19.4.1.1Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be notless than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
188	19.4.2.1150x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
189	19.7.1.1Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neatcement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size ) finished with a floating coat of neatcement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)455x610 mm internal dimensions, total weight of cover and frame to be not less than38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clayF.P.S. (non modular) bricks of class designation 7.5
190	19.7.2.1Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neatcement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size ) finished with a floating coat of neatcement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S (non modular) bricks of class designation 7.5
191	19.8.1.1Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of classdesignation 7.5
192	19.8.2.1Extra for depth for manholes Size 120x90 cmWith common burnt clay F.P.S. ( non modular ) bricks of classdesignation 7.5
193	50.17.1.2Supplying and fixing CP Towel rod 45cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge.
194	50.18.7.5.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 40 mmdia 6Kgf/cm2 - Internal work - Exposed on wall
195	50.18.8.3.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 25 mm pipe10kgf /cm2
196	50.18.8.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 50 mm pipe6 kgf/cm2
197	50.18.9.21.7Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 75 mm dia Vent cowl
198	50.18.9.22.8Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,including jointing with PVC solvent cement -110 mm dia Vent cowl
199	17.28.2.1Flexible pipe32 mm dia
200	50.17.1.1Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
201	50.18.7.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 6 Kgf/cm2 - Internal work- Exposed on wall
202	OD260956/2025-2026\\"Supplying and fixing Health faucet ABS body with wall hook and 1 metre SSbraided rubber hose pipe in position EWC cruse set & seat cover ( Cera S1013200,B1520118)wall hung wash basin (Cera S2040101)Elbow operated pillar cock (Cera - F9030101),4 wall mounted Grab bars 600mm long(Cera - B2210106)1wall mounted Hinged rail 600x100 mm (Cera - B2210107)
203	OD260957/2025-2026\\"Supplying and fixing 550x425x180mm or nearest size rectangular shape wash handbasin of white glazed earthenware (Indian make best quality) counter sunk alreadybuilt with necessary chipping and chamfering and finishing including supplying andfixing C P brass waste, 15mm cp brass pillar tap (best quality)1 no. including cuttingand making good the walls, providing brackets for supports etc. complete.
204	OD260958/2025-2026\\"Providing and fixing CP brass Self closing angle cock pressmaticfor urinal with wall flange and 200 mm long connecting pipe
205	OD260959/2025-2026\\"Supplying and fixing white glazed earthenware Urinal of 430x260x350 mm ornearest size (Indian make best quality) fixing with TW plugs and screws embedded inCM, providing 40mm CP waste ? 1no, including cutting, making good the walls andfloors etc. complete.
206	OD260960/2025-2026\\"Providing and fixing floor mounted, white vitreous china Two piece water closet ofapproved make and size including seat cover, cistern with twin flush fittings withflow rate 8% less than base line flow rate of 6/3L flush ,nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge.
207	OD261083/2025-2026\\"Supplying and fixing white glazed European water closet with cistern with twinflush fittings with flow rate 8% less than base line flow rate of 6/3L flush, washbasin510x400 mm, 600x100 hinged hand rail-1 nos, 600mm long grab bars-4 nos andall associated accessories like flushing cistern, raised seat and cover, CP brass elbowoperated pillar tap, waste coupling etc. to make the toilet functional for special needpersons including cutting and making good the walls and floor, etc. complete.\\"
208	OD261541/2025-2026\\"Supply and Laying 160 diameter SN 4 sewage pipes conforming to IS15328,lowering into trenches, placing in position, aligning to line and levels and jointingwith solvent cement including earth work excavation in all classes of soil, refilling thetrenches and transporting excess soil as recommended by the site engineer, complete.(For sewer lines & Rain water harvesting).
209	OD261542/2025-2026\\"Supply and Laying 110 diameter SN 8 sewage pipes conforming to IS15328,lowering into trenches, placing in position, aligning to line and levels and jointingwith solvent cement including earth work excavation in all classes of soil, refilling thetrenches and transporting excess soil as recommended by the site engineer, complete.(For sewer lines & rain water harvesting).
210	OD261543/2025-2026\\"Supply and fixing Inline rain water filter suitable for area up to 225sqm having ss304multi surface screen, 110mm inlet, 75mm clear water outlet and 90mm drain outletetc.
211	OD261544/2025-2026\\"Constructing masonry shoe to the bottom of the rain water pipes with brick incement mortar 1:6 over CC 1:4:8 using 40mm metal concrete, plastering the exposedsurfaces using CM 1:5 one coat, forming the circular spout outlet, finishing etc.complete
212	OD261545/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials for Rainwater with good quality solvent cement and teflon tape and fixing the same to line,plumb and level on the sides of ducts, walls, suspended to slabs as the case may be byusing slotted rails , U clamps, 8mm threaded rods and other required materials including drilling holes, making good the walls, cleaning etc. and finishingcomplete:75mm diameter
213	OD261547/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials (For vent)with good quality solvent cement and teflon tape and fixing the same to line, plumband level on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete: 110mmdiameter
214	OD261548/2025-2026\\"Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials withgood quality solvent cement and teflon tape and fixing the same to line, plumb andlevel on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete : 75 mmdiameter
215	OD261549/2025-2026\\"Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials withgood quality solvent cement and teflon tape and fixing the same to line, plumb andlevel on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete : 110 mmdiameter
216	OD261550/2025-2026Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing withsolvent cement and fixing them on slabs, floors etc. in position for connecting variousfixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) andspecials with brick or CC supports wherever necessary including cutting and chasingbrick walls as required, making good the same with brick in CM 1:6 and plasteringwith CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete,complete : 75 mm diameter
217	OD261551/2025-2026\\"Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing withsolvent cement and fixing them on slabs, floors etc. in position for connecting variousfixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) andspecials with brick or CC supports wherever necessary including cutting and chasingbrick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete,complete : 110 mm diameter
218	OD261552/2025-2026\\"Cutting holes up to 15x15cm or nearest size in R.C.C. floors and roofs for passingdrain pipe etc. and repairing the hole after insertion of drain pipe etc. with cementconcrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominalsize) including non shrink grout and epoxy resin based putty followed by testing so asto make the core leak proof
219	OD261553/2025-2026\\"Providing and fixing SS grating of approved quality. Rectangular type with openablecircular lid : 150 mm nominal size square 100 mm diameter of the inner hinged roundgrating
220	OD261554/2025-2026\\"Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali includingcutting open, boring through RCC slabs and making good the damages.
221	OD261555/2025-2026\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC SCH 40) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer in Charge. Internal work/external work- Exposed on wall :65 mm nominal outer dia .Pipes
222	OD261556/2025-2026\\"Providing and fixing low flow over head shower of size 100mm dia round shape(single flow) and shower arm in position
223	OD261557/2025-2026\\"Supply and fixing C.P. brass stop cock (concealed) of standard design and ofapproved make conforming to IS:8931.:20 mm nominal bore.
224	OD261558/2025-2026\\"Supplying and fixing CP towel ring of approved shape including cost of materialsand labour charges etc complete as per the direction of site Engineer-in-charge
225	OD261559/2025-2026\\"Supplying and fixing 550x425x180mm or nearest size rectangular shape wash handbasin of white glazed earthenware (Indian make best quality) counter sunk alreadybuilt with necessary chipping and chamfering and finishing including supplying andfixing C P brass waste, 15mm cp brass pillar tap (best quality)1 no. including cuttingand making good the walls, providing brackets for supports etc. complete.
226	OD261564/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials for Rainwater with good quality solvent cement and teflon tape and fixing the same to line,plumb and level on the sides of ducts, walls, suspended to slabs as the case may be byusing slotted rails , U clamps, 8mm threaded rods and other required materialsincluding drilling holes, making good the walls, cleaning etc. and finishingcomplete:110mm diameter
227	OD261566/2025-2026\\"Supply, Erection, Testing and Commissioning of centrifugal monoblock pump(Transfer pump) set capable of lifting 100 lpm of water against a total head of 30m - 2nos (1 working and other standby) with accessories such as 50mm non return valve -2nos, 50mm full way wheel valve - 2nos, pump panel having MCB, digital diaplay ofvoltage and current, Indicating lamps, manual switches, digital function capable ofdry run prevention and automatic interchange system all enclosed within a singlepanel(Approximately 1.5HP, Filling time 15min, For domestic water)
228	OD261567/2025-2026\\"Supplying and fixing of heavy duty slotted rail, full threaded rod, U bolts, universalclamps, nuts and washers for clamping pipes, floor traps etc.in ducts and belowceiling
229	OD261570/2025-2026\\"Supplying and fixing 8mm anchor fastner for fixing threaded rod in position
230	OD261572/2025-2026\\"Supplying and fixing 10mm anchor fastner for fixing threaded rod in position.
231	OD261581/2025-2026\\"Supply and fixing of CPVC puddle pipe with flange minimum 60cm long or assuggested by plumbing contractor which ever is greater in water tank as directed bythe engineer in charge50mm outer diameter
232	OD261582/2025-2026\\"Supply and fixing of CPVC puddle pipe with flange minimum 60cm long or assuggested by plumbing contractor which ever is greater in water tank as directed bythe engineer in charge62.50mm inner diameter\\"
233	OD261583/2025-2026\\"Supply and fixing of CPVC puddle pipe with flange minimum 60cm long or assuggested by plumbing contractor which ever is greater in water tank as directed bythe engineer in charge75mm inner diameter
234	OD261584/2025-2026\\"Supply and fixing of CPVC puddle pipe with flange minimum 60cm long or assuggested by plumbing contractor which ever is greater in water tank as directed bythe engineer in charge100mm inner diameter
235	PRESS BUILDING- CIVIL WORK15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
236	15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)
237	15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
238	15.28.2 Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet
239	15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
240	15.60 Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
241	15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In cement mortar
242	50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
243	50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
244	50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
245	50.6.1.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
246	50.6.1.7 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
247	50.6.3.1 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
248	50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
249	11.26.1 Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick
250	11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
251	11.47.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
252	11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
253	11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles
254	8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
255	8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
256	2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
257	22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
258	22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
259	4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
260	4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).
261	4.2.8 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
262	4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
263	13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
264	13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
265	13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
266	13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
267	13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
268	13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
269	13.91 Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessaryrepairs to scratches etc. complete.
270	5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum
271	5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum
272	5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide
273	5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
274	5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers
275	5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
276	10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
277	10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
278	21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )
279	21.1.2.3 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)
280	21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.205 x 19 mm
281	21.13 Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete
282	21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
283	21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
284	60.7.1 DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
285	9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
286	9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
287	9.122.1 Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
288	9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
289	2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
290	7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
291	5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
292	13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
293	50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
294	OD257871/2025-2026 \\"Derived 12.1.1 Providing and fixing 50 mm thick pre-fabricated PUF sandwich panel having top sheet .40 mm + 50 mm PU ( 40 kg/m3) + .35 mm bottom sheet (size, shape andcolour as approved by Engineer-in-charge) including all cost of conveyance andlabour charges etc as specified and as directed by the Engineer-in-Charge. The sheetshall be fixed using self drilling/self tapping screws and excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.\\"
295	OD257872/2025-2026 \\"Derived 10.25.2 Providing and fixing of gutter, trims, and flashing using Galvalume or GI sheet as per approved shop drawing fixing with necessary accessories complete as per direction of engineer in charge.\\"
296	OD257873/2025-2026 Supplying and fixing GAF roofing shingles with underlying roof runner as per the approved pattern on Fibre Cement Board over steel framework , including the cost of all materials, labour for fixing, scaffolding charges, etc complete as directed by the Engineer.cement board and truss will be paid separately
297	OD257874/2025-2026 Supplying and fixing Ridges as per the approved pattern ,including all cost of materials labour for fixing and scaffolding charges etc. complete as directed by the Engineer
298	OD257875/2025-2026 \\"Cement board paneling (without frame): Providing and fixing 12 mm thick fibre cement board into existing frame / Substrate as per design intent. including cost and conveyance of all materials, labour charges etc complete.\\"
299	OD257876/2025-2026 \\"12mm toughened glass door: Providing and fixing door of 12mm thick Toughened glass door (Saint Gobain/Equivalent) with (dorma kaba/Equivalent) patch fittings (Floor Spring, Top patch, pivot Pin, Bottom patch, Corner lock, Handle).Including all cost and conveyance of materials, labour etc complete.\\"
300	OD257877/2025-2026 Providing and fixing SS hook and eye : 200mm for windows & ventilators Derived from 14.35.1
301	OD257878/2025-2026 Providing and fixing S.S. tower bolt 6\\" with necessary screws etc. complete ( Derived from 9.63.3)
302	OD264467/2025-2026 \\"Toughened Glass Partition with patch fittings : Providing and fixing 12mm thick Toughened glass(Saint Gobain) Partition System with SS Patch Fittings(Dorma kaba/Equivalent) with gap between glass filled with silicon sealent as per design intent.Including all cost and conveyance of materials, labour etc complete.\\"
303	2.35.3.1 Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
304	OD353232/2025-2026 Providing and laying flamed Finish Granite stone flooring in required design and patterns with 18mm thick stone slab over 220mm thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry
305	OD353264/2025-2026 Providing and fixing 175mm door handle set lock body of approved quality
306	OD353267/2025-2026 \\"Flush Door( Laminate Finish ): Providing & Fixing flush door with frame as per approved drawing. Door frame and shutter frameworks finished with 19 mm plywood (IS 710 Grade,BWP Prestige/EG Bond/Equivalent). Both sides of the frame to be panelled with 9 mm plywood and finished with 1mm thick laminate finish ( Greenlam/Century/Newmika/Merinolam/equivalent) using suitable adhesive (Fevicol/Equivalent). Complete using necessary SS Hinges, SSTower bolts, Mortice lock with cylinder lock, Lever handle, Door closer, stopper (Hafele/ Hettich/equivalent) etc., Including cost and conveyance of all materials labour charges etc. complete as per drawing.\\"
307	PRESS BUILDING- PLUMBING WORKS8.10.2Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade
308	18.17.3Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :40 mm nominal bore
309	18.17.4Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :50 mm nominal bore
310	18.21.2.1Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
311	18.32.1Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation,foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mmnominal size) and inside plastering with cement mortar 1:3(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design:With common burnt clay F.P.S (non modular) bricksof class designation 7.5
312	18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank.
313	18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore
314	18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 893115 mm nominal bore
315	18.7.5Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40mm nominal dia pipes
316	18.7.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings including fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50mm nominal dia pipes
317	18.8.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes
318	18.8.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.25 mm nominal dia pipes
319	18.8.4Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes& fittings, with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good thewall etc.32 mm nominal dia pipes
320	18.9.5Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solventcement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work40 mm nominal dia pipes
321	18.9.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineerin-Charge. External work50 mm nominal dia pipes
322	17.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approvedquality) complete with 6 mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete.
323	17.71Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and112 mm distance from wall of standard shape with bracket of the same materials withsnap fittings of approved quality and colour, weighing not less than 105 gms
324	12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cmdiameter and weighing not less than 440 grams.
325	19.16Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulatedas per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimumcross section as 23 mm x 25 mm and over all minimum length 263 mm and width as165 mm with minimum 112 mm space between protruded legs having 2 mm tread ontop surface by ribbing or chequering besides necessary and adequate anchoringprojections on tail length on 138 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and havingmanufactures permanent identification mark to be visible even after fixing includingfixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design
326	19.32.1Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honeycomb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete asper standard design.With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5
327	19.4.1.1Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be notless than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
328	19.4.2.1150x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
329	19.7.1.1Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neatcement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size ) finished with a floating coat of neatcement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)455x610 mm internal dimensions, total weight of cover and frame to be not less than38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clayF.P.S. (non modular) bricks of class designation 7.5
330	19.7.2.1Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neatcement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size ) finished with a floating coat of neatcement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S (non modular) bricks of class designation 7.5
331	19.8.1.1Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of classdesignation 7.5
332	19.8.2.1Extra for depth for manholes Size 120x90 cmWith common burnt clay F.P.S. ( non modular ) bricks of classdesignation 7.5
333	50.17.1.2Supplying and fixing CP Towel rod 45cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge.
334	50.18.8.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 50 mm pipe6 kgf/cm2
335	50.18.9.21.7Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 75 mm dia Vent cowl
336	50.18.9.22.8Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,including jointing with PVC solvent cement -110 mm dia Vent cowl
337	17.28.2.1Flexible pipe32 mm dia
338	OD260956/2025-2026\\"Supplying and fixing Health faucet ABS body with wall hook and 1 metre SSbraided rubber hose pipe in position EWC cruse set & seat cover ( Cera S1013200,B1520118)wall hung wash basin (Cera S2040101)Elbow operated pillar cock (Cera - F9030101),4 wall mounted Grab bars 600mm long(Cera - B2210106)1wall mounted Hinged rail 600x100 mm (Cera - B2210107)
339	OD260957/2025-2026\\"Supplying and fixing 550x425x180mm or nearest size rectangular shape wash handbasin of white glazed earthenware (Indian make best quality) counter sunk alreadybuilt with necessary chipping and chamfering and finishing including supplying andfixing C P brass waste, 15mm cp brass pillar tap (best quality)1 no. including cuttingand making good the walls, providing brackets for supports etc. complete.
340	OD260958/2025-2026\\"Providing and fixing CP brass Self closing angle cock pressmaticfor urinal with wall flange and 200 mm long connecting pipe
341	OD260959/2025-2026\\"Supplying and fixing white glazed earthenware Urinal of 430x260x350 mm ornearest size (Indian make best quality) fixing with TW plugs and screws embedded inCM, providing 40mm CP waste ? 1no, including cutting, making good the walls andfloors etc. complete.
342	OD260960/2025-2026\\"Providing and fixing floor mounted, white vitreous china Two piece water closet ofapproved make and size including seat cover, cistern with twin flush fittings withflow rate 8% less than base line flow rate of 6/3L flush ,nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge.
343	OD261083/2025-2026\\"Supplying and fixing white glazed European water closet with cistern with twinflush fittings with flow rate 8% less than base line flow rate of 6/3L flush, washbasin510x400 mm, 600x100 hinged hand rail-1 nos, 600mm long grab bars-4 nos andall associated accessories like flushing cistern, raised seat and cover, CP brass elbowoperated pillar tap, waste coupling etc. to make the toilet functional for special needpersons including cutting and making good the walls and floor, etc. complete.\\"
344	OD261542/2025-2026\\"Supply and Laying 110 diameter SN 8 sewage pipes conforming to IS15328,lowering into trenches, placing in position, aligning to line and levels and jointingwith solvent cement including earth work excavation in all classes of soil, refilling thetrenches and transporting excess soil as recommended by the site engineer, complete.(For sewer lines & rain water harvesting).
345	OD261543/2025-2026\\"Supply and fixing Inline rain water filter suitable for area up to 225sqm having ss304multi surface screen, 110mm inlet, 75mm clear water outlet and 90mm drain outletetc.
346	OD261544/2025-2026\\"Constructing masonry shoe to the bottom of the rain water pipes with brick incement mortar 1:6 over CC 1:4:8 using 40mm metal concrete, plastering the exposedsurfaces using CM 1:5 one coat, forming the circular spout outlet, finishing etc.complete
347	OD261547/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials (For vent)with good quality solvent cement and teflon tape and fixing the same to line, plumband level on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete: 110mmdiameter
348	OD261548/2025-2026\\"Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials withgood quality solvent cement and teflon tape and fixing the same to line, plumb andlevel on the sides of ducts, walls, suspended to slabs as the case may be by usingslotted rails , U clamps, 8mm threaded rods and other required materials includingdrilling holes, making good the walls, cleaning etc. and finishing complete : 75 mmdiameter
349	OD261550/2025-2026Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing withsolvent cement and fixing them on slabs, floors etc. in position for connecting variousfixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) andspecials with brick or CC supports wherever necessary including cutting and chasingbrick walls as required, making good the same with brick in CM 1:6 and plasteringwith CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete,complete : 75 mm diameter
350	OD261551/2025-2026\\"Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing withsolvent cement and fixing them on slabs, floors etc. in position for connecting variousfixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) andspecials with brick or CC supports wherever necessary including cutting and chasingbrick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete,complete : 110 mm diameter
351	OD261553/2025-2026\\"Providing and fixing SS grating of approved quality. Rectangular type with openablecircular lid : 150 mm nominal size square 100 mm diameter of the inner hinged roundgrating
352	OD261554/2025-2026\\"Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali includingcutting open, boring through RCC slabs and making good the damages.
353	OD261558/2025-2026\\"Supplying and fixing CP towel ring of approved shape including cost of materialsand labour charges etc complete as per the direction of site Engineer-in-charge
354	OD261559/2025-2026\\"Supplying and fixing 550x425x180mm or nearest size rectangular shape wash handbasin of white glazed earthenware (Indian make best quality) counter sunk alreadybuilt with necessary chipping and chamfering and finishing including supplying andfixing C P brass waste, 15mm cp brass pillar tap (best quality)1 no. including cuttingand making good the walls, providing brackets for supports etc. complete.
355	OD261563/2025-2026\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC SDR 11) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per directionof Engineer in Charge. Concealed work including cutting chases and making good thewalls etc :40 mm nominal outer dia .Pipes.
356	OD261564/2025-2026\\"Supply , jointing and fixing SWR type A exposed pipes and specials for Rainwater with good quality solvent cement and teflon tape and fixing the same to line,plumb and level on the sides of ducts, walls, suspended to slabs as the case may be byusing slotted rails , U clamps, 8mm threaded rods and other required materialsincluding drilling holes, making good the walls, cleaning etc. and finishingcomplete:110mm diameter
357	OD261566/2025-2026\\"Supply, Erection, Testing and Commissioning of centrifugal monoblock pump(Transfer pump) set capable of lifting 100 lpm of water against a total head of 30m - 2nos (1 working and other standby) with accessories such as 50mm non return valve -2nos, 50mm full way wheel valve - 2nos, pump panel having MCB, digital diaplay ofvoltage and current, Indicating lamps, manual switches, digital function capable ofdry run prevention and automatic interchange system all enclosed within a singlepanel(Approximately 1.5HP, Filling time 15min, For domestic water)
358	OD261567/2025-2026\\"Supplying and fixing of heavy duty slotted rail, full threaded rod, U bolts, universalclamps, nuts and washers for clamping pipes, floor traps etc.in ducts and belowceiling
359	OD261570/2025-2026\\"Supplying and fixing 8mm anchor fastner for fixing threaded rod in position
360	OD261572/2025-2026\\"Supplying and fixing 10mm anchor fastner for fixing threaded rod in position.
361	OD261574/2025-2026\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC SDR 11) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per directionof Engineer in Charge. Concealed work including cutting chases and making good thewalls etc :50 mm nominal outer dia .Pipes.
362	CAMPUS DEVELOPMENT- CIVIL WORKS2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
363	2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift up to 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.All kinds of soil
364	4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
365	4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
366	4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
367	5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
368	5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
369	5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth levelConcrete of M25 grade with minimum cement content of330 kg /cum
370	5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum
371	5.9.1Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete
372	5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide
373	5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
374	5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
375	5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
376	5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
377	7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
378	2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
379	8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
380	13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
381	13.18 Neat cement punning
382	13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
383	13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
384	16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
385	16.78.1 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
386	16.91.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
387	16.91.2 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
388	50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
389	50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
390	50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) includingcost of scaffolding complete
391	60.6 PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete
392	2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
393	5.9.19 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
394	4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).
395	60.7.1 DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
396	50.6.1.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
397	50.6.1.7 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
398	11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm.
399	11.46.2 Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
400	22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
401	9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
402	9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
403	21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness ofpolyester powder coating 50 micron )
404	21.1.2.3 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)
405	21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.205 x 19 mm
406	21.13 Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete
407	21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
408	21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
409	13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
410	OD262716/2025-2026Providing and fixing SS hook and eye : 200mm for windows & ventilators Derivedfrom 14.35.1
411	OD262717/2025-2026 Providing and fixing S.S. tower bolt 6\\" with necessary screws etc. complete ( Derived from 9.63.3)
412	OD262721/2025-2026 Applying Antitermite treatment on flooring using second generation chemicals which is ecofriendly and nil harm ful for human beings and pet animals which control the pests including all cost and labour charges etc complete
413	OD262722/2025-2026 Applying a coat of Inertol Poxitar Coal tar epoxy coating per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
414	10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
415	13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
416	OD262724/2025-2026 Applying two coat of sealer (Cera acryl mat finish-20kg) on Laterite cladding work surface and including all cost and conveyance of all materials and labour charges etc. complete.
417	OD262725/2025-2026 \\"Laterite cladding: Supplying and fixing laterite cladding tile of size:180x300mm using suitable adhesive (MYK Lacticrete 335/Equivalent) as per design intent. Including cost and conveyance of all materials labour charges etc.\\"
418	2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge.All kinds of soil
419	2.27 Supplying and filling in plinth with sand under floors, including watering, ramming consolidating and dressing complete.
420	OD263084/2025-2026 Supply and Fixing of 150 CM Slide: .“A” shaped support posts of height 2.28 m, are to be schedule Galvanized steel with a 60mm OD {Outer Diameter}. Deck of size 0.80 m x 0.60 m and Staircase of size 1.84 m x 0.60 m shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Handrail of height 1.9 m and Dia 32 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes. Wavey Slide of size 2.95 m x 0.72 m x 1.72 m. Play equipment dimension: 4.18 m x 0.89 m x 2.28 m
421	OD263085/2025-2026 Supply and Fixing of Merry Go Round: .The Centre post of height 815 mm are to be schedule Galvanized steel with a 48 mm OD {Outer Diameter}. Round Deck of Dia 1.21 shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of size 815 mm x 474 mm and Dia 32 mm. Designed for children aged 3-12 years, Play equipment dimension: Dia ? 1.21 m
422	OD263086/2025-2026 Supply and Fixing of Fiero A Swing: Hot dip galvanized and powder coated galvanized steel of A” Shaped support posts having 80mm OD {Outer Diameter}of height 2.1 m are to be schedule Galvanized steel with a Top rail of length 2.58 m and Dia 76 mm shall be an all-robotic welded unit, fabricated from O.D. galvanized steel pipes. Flat Swing seat of size 440 mm x 150 mm x 30 mm, Bucket Swing seat of size Dia 325 mm and height 245 mm. Stainless steel screws and/or screwscovered with plastic caps. Safe end caps on top of the structure made of rubber or polypropylene. Designed for children aged 3-12 years, with a capacity to accommodate 2 children at a time for a safe play area measuring 5.65x4.93m. Including all cost of material, painting, labour cost, transportation etc complete. AllJoints are Robotic Welded. Play equipment dimension: : 2.75 x 1.5 x 2.1 m
423	OD263087/2025-2026 Supply and Fixing of 4 Seater See Saw: Hot dip galvanized and powder coated galvanized steel construction of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia114mm.It consists of 4 seats. Clamps and couplings casted from aluminum alloy which is pretreated, cured and sand blasted and finished with a baked on powder coat finish. Attested, safe seats made of made of LLDPE virgin plastic. Stainless steel screws and/or screws covered with plastic caps. Safe end caps on top of the structure made of rubber or polypropylene. Designed for children aged 3-12 years, with acapacity to accommodate 4 children at a time for a safe play area measuring5.57x2.91 m. Including all cost of material,painting, labour cost, transportation etccomplete. All Joints are Robotic Welded. Play equipment dimension:2.6 X 0.5 X 0.7m
424	OD263090/2025-2026 Supply and Fixing of Multiplay system HPS-MPS-1864 :Curved structural poles of height 2.2 m, 2.9 m and 3.3 m are to be schedule Galvanized steel with a 114mm outer diameter. Snake Climber size is 1.0 m x 0.59 m x 1.2 m, Ladder Climber of size 1.0 m x 0.50 m and Piped walls of size1.0 m, shall be an all welded fabricated from 32 O.D. galvanized steel pipes.Monkey loop of size is 2.35 m x 1.16 m x 1.98 m shall be an all welded fabricated from 32 O.D. galvanized steel.Roof of size 1.47 m x 1.47 m x 0.90 m, Straight Slide of size 3.2 m x 0.95 m x 1.5 m, Right Curved slide of size 1.67 m x 1.54 m x 0.90 m, Spiral Slide of size 1.65 m x 1.73 m x 1.65 m,Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Play equipment dimension: 7.25 m x 8.61 m x 4.10 m
425	30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
426	30.2.39.5Complete maintenance of the entire garden features having as per yard stick in thegarden area i.e. lawn trees, shrubs, herbs, hedge, flower beds, foliages, creepers etc.including hoeing, weeding pruning replacement of plants, gap filling, watering,mowing of lawn, grass cutting by lawn mover and brush cutter , removal of gardenwaste, applying insecticide, pesticide & fertilizers(whenever required) topdressing of lawn with good earth and manure and maintenance of other gardenrelated works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer,Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by theDepartment & other T & P material/articles shall be provided by thecontractor.)and as per direction of officer in charge.Play grounds / Public parks. (2.00Acre=One Mali)As per yard stick.2.75/2.00
427	OD263260/2025-2026 Providing and planting Dissotis rotundifolia -15cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge
428	OD263261/2025-2026 Providing and planting Dissotis rotundifolia -15cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
429	OD263262/2025-2026 Providing and Philodendron burle marx-30 cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
430	OD263263/2025-2026 Providing and planting Coreopsis-15cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticid and all labour charge etc complete in as per direction of the officer incharge.
431	OD263264/2025-2026 Providing and planting Ixora mini red-30cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
432	OD263265/2025-2026 Providing and planting Hibiscus rosa sinensis-45-60cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge
433	OD263266/2025-2026 Providing and planting Tabernaemontana coronaria -45-60cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
434	OD263267/2025-2026 Providing and planting Plumbago capensis-45cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, rammingand sectioning of spoil bank etc including spreading and mixing of manure,fertilisers, pesticides and all labour charge etc complete in as per direction of theofficer in-charge.
435	OD263268/2025-2026 Providing and planting Heliconia psittacorum lady di-45cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
436	OD263269/2025-2026 Providing and planting Duranta green-45cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
437	OD263270/2025-2026 Providing and planting Buddha bamboo-120cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
438	OD263271/2025-2026 Providing and planting Rhapis excelsa-90cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
439	OD263272/2025-2026 Providing and planting Millingtonia hortensis-120cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge
440	OD263273/2025-2026 Providing and planting Delonix regia-120cm height in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge
441	OD263274/2025-2026 Providing and planting Bauhinia purpurea-120cm height in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
442	OD263275/2025-2026 Providing and planting Michelia champaka-120cm in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
443	OD263276/2025-2026 Providing and planting Mesua ferrea-120cm height in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
444	OD263277/2025-2026 Providing and planting Mangifera indica-120cm height in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer in-charge.
445	OD263278/2025-2026 Providing and planting Cassia fistula (Amaltash) height 120-135 cm. in big poly bags of plants size 25 cm as per direction of the officer in-charge.
446	OD263279/2025-2026 Providing and planting Mexican grass in ordinary soil including uprooting weeds manually, fine dressing, digging of pits, breaking of clods, watering, ramming and sectioning of spoil bank etc including spreading and mixing of manure, fertilisers, pesticides and all labour charge etc complete in as per direction of the officer incharge. Mexican Grass
447	13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) Please Enable Macros to View BoQ information 0.0

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Civil Construction Tenders

Plumbing and Sanitary Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Implementation Of Aksharam Museum - Phase Ii,Iii & Iv ( Civil & Plumbing Works), Kottayam-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Implementation Of Aksharam Museum - Phase Ii,Iii & Iv ( Civil & Plumbing Works), Kottayam-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us