|
| 1 | Task Name : 100 KVA DTR |
| 2 | 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 3 | Erection costo of 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 4 | 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 |
| 5 | Erection cost o f 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 |
| 6 | 11 KV D.O. Fuse Unit Polymer type |
| 7 | Fixing of 11 KV D.O. fuse unit ( Set of 3 No. ) |
| 8 | 11 KV Strain hardware (T&C type) fittings |
| 9 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 10 | Erection cost of 11 KV Disc Insulators with hardware |
| 11 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 12 | Erection cost of 9 KV Gapless type ( 5KA) Polymer for DTR |
| 13 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 14 | DTR 11/0.4 KV BIS EE-Level-2 100 KVA |
| 15 | Handling & Installation of Distribution Transformer (DTR) on DP, tightening with turn buckles on both sides, poles clamping and boting of base jumpering on HT side (Including hydra charges in urban area and chain pully charges in rural area) |
| 16 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 17 | Erection cost of material with transportation for H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 18 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 19 | XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 20 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 21 | 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 22 | Erection cost of 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 23 | Aluminium paint |
| 24 | Erection cost of Aluminium paint |
| 25 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 26 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 27 | Bentonite compound powder |
| 28 | Bi-metallic clamps Distribution Transformers Bushing |
| 29 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 30 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 31 | Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole |
| 32 | Erectio cost of Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole |
| 33 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 34 | Erection cost of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 35 | D.O.Mounting Channel 75x40x6mm |
| 36 | Eretion cost of D.O.Mounting Channel 75x40x6mm |
| 37 | Danger Boards Enamelled 11 KV |
| 38 | Erection cost of Danger Boards Enamelled 11 KV |
| 39 | Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 40 | Erection cost of Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 41 | DTR S/s fencing (37 feet) of 6' with on MS Angle(50x50x6mm) 7No, 7'Height |
| 42 | Erection cost of DTR S/s fencing (37 feet) of 6' with on MS Angle(50x50x6mm) 7No, 7'Height |
| 43 | G.I. STRIP 25X3 MM1 |
| 44 | G.I.Pipe 40 mm Dia C grade type |
| 45 | Erection cost of G.I.Pipe 40 mm Dia C grade type |
| 46 | Galvanized nut & bolt with washer |
| 47 | LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer |
| 48 | Erection cost of LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer |
| 49 | M.S.Nuts with Bolts |
| 50 | Red oxide paint |
| 51 | Erection cost of Red oxide paint |
| 52 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 53 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 54 | Transformer mounting Channel (100X50x6 mm.) |
| 55 | Erection cost of Transformer mounting Channel (100X50x6 mm.) |
| 56 | GST 18% Please Enable Macros to View BoQ information |
