|
| 1 | SH: Boundary Wall (605 Mtr) |
| 2 | Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 3 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: |
| 4 | a) Foundations and plinth |
| 5 | Centring and shuttering including strutting, propping etc and removal of form work for : |
| 6 | a) Foundation, footings, bases of columns etc. and mass concrete. |
| 7 | b Column, pillars, posts and struts etc. |
| 8 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 9 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : |
| 10 | M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 11 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. |
| 12 | M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 14 | M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 15 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 16 | 1) Mild Steel |
| 17 | 2) Tar/TMT steel |
| 18 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand). |
| 19 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
| 20 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 21 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 22 | 15 mm cement plaster 1 : 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall. |
| 23 | Providing and laying up to floor two precast cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) including centring shuttering in : |
| 24 | i) String courses, copings, bed plates, anchor blocks, plain window sills and the like. |
| 25 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. A) plin Grill |
| 26 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 27 | SH:- Steel Gate ( 5 Nos) |
| 28 | Steel work in single secton including cutting, hoisting, fixing in position and applying priming coat of red lead. |
| 29 | In T. Angle |
| 30 | In flats upto 10 mm thickness |
| 31 | Welding length for frame |
| 32 | Labour for painting of square bars. |
| 33 | Painter |
| 34 | Belder Please Enable Macros to View BoQ information |
