|
| 1 | MATERIAL SUPPLY PHASE II |
| 2 | STONE AGGREGATE 20 MM SINGLE SIZE |
| 3 | STONE AGGREGATE 10 MM SINGLE SIZE |
| 4 | COARSE SAND ZONE III (M SAND) |
| 5 | PORTLAND CEMENT |
| 6 | PORTLAND CEMENT |
| 7 | 40 mm stone aggregate single size |
| 8 | Twisted steel/deformed bars |
| 9 | Twisted steel/deformed bars |
| 10 | well graded material for sub base grading I,53MM TO 9.5 MM BELOW @50 % |
| 11 | well graded material for sub base grading I,9.5 MM TO 2.36 MM BELOW @20 % |
| 12 | well graded material for sub base grading I,2.36 MM BELOW @30 % |
| 13 | Double clip (Bridge clip) |
| 14 | Single clip |
| 15 | MS tube 40mm dia |
| 16 | Solid block 30x20x15cm |
| 17 | Stone masonry work |
| 18 | Trough and bond stone size 24x24x39cm |
| 19 | Royalty for good earth |
| 20 | Solid block size 30x20x20cm |
| 21 | Solid block size 40x20x10cm |
| 22 | Flats upto 10mm in thickness |
| 23 | Mild steel round bar 12mm dia and below |
| 24 | Welding by electric plant |
| 25 | Red oxide zinc chromate primer |
| 26 | Structural steel such as tees angles,channels and RSJ |
| 27 | Adjustable span ESO(2.35-3.40) |
| 28 | Adjustable telescopic prop 3m (2.02-3.75m) |
| 29 | Beam clamp 300-380mm(450-1070mm) |
| 30 | Corner angle 45x45x5mm,2.5m long |
| 31 | Column clamp 450x1070mm |
| 32 | Prop 2m (2-3.5m) |
| 33 | Twisted steel/deformed bars |
| 34 | Anjiliwood scantls |
| 35 | Mild steel round bars about 12mm dia |
| 36 | Rawl plug 50mm (Designation 10 numbers) |
| 37 | Bright finished or black enameled mild steel butt hinges 50x37x1.5mm |
| 38 | Bright finished or black enameled mild steel butt hinges 100x58x1.9mm |
| 39 | Bright finished or black enameled mild steel screws 20mm |
| 40 | Bright finished or black enameled mild steel screws 40mm |
| 41 | Anjiliwood planks |
| 42 | Float glass sheet of nominal thickness 4mm (weight not less than 10kg/m2) |
| 43 | Fine sand (zone 4) |
| 44 | Ceramic glazed tiles first quality 300x300mm in all shades and designs of white,ivory,gray,fume red brown etc. |
| 45 | Ceramic glazed tiles first quality minimum thickness of 5mm in all colours shades and designs except Burgendy,Bottle green black |
| 46 | Water thinnable cement primer for interior wall surface having VOC content less than 50 grams/litre |
| 47 | Plastic emulsion paint |
| 48 | Pink primer (for wood) |
| 49 | Synthetic enamel paint in black or chocolate shade |
| 50 | PVC pipe 25mm outer dia 10kgf/cm2 |
| 51 | PVC 20mm outer dia 10kgf/cm2 |
| 52 | PVC pipe 50mm outer dia 6kgf/cm2 |
| 53 | PVC pipe 110mm outer dia 6kgf/cm2 |
| 54 | PVC pipe 63mm outer dia 6kgf/cm2 |
| 55 | PVC vent cowl 63mm dia |
| 56 | PVC elbow 63mm dia |
| 57 | Stainless steel kitchen sink without drainboard 470x420mm bowl depth 178mm |
| 58 | CI brackets for wash basins and sink |
| 59 | 15mm CP brass tap |
| 60 | Polythene water storage tank with cover and suitable locking arrangement per litre |
| 61 | Vitreous china orrisa type W.C pan size 580mm |
| 62 | Flushing cistern PVC 10 lts capacity (low level) (white) (with fittinhgs,accessories and flush pipe) |
| 63 | 100mm S.C.I trap with vent heel |
| 64 | Vitreous China flat back wash basin 550x400mm |
| 65 | CP Brass waste 32mm |
| 66 | Oxidised mild steel handles125mm |
| 67 | Oxidised mild steel screws 25mm |
| 68 | Oxidised mild steel tower bolt (barrel type 200x10mm) |
| 69 | Oxidised mild steel screws 30mm |
| 70 | Brass mortice latch and lock 100x65mm with six levers and a pair of brass lever handles Please Enable Macros to View BoQ information |
