|
| 1 | Total Amount of BoQ 2 |
| 2 | Amount after unconditional Rebate |
| 3 | MCL Lakhanpur |
| 4 | BoQ3 Schedule 'A'- Earthwork in Formation |
| 5 | BoQ4 Schedule 'B'- Bridge Works (Minor Bridges ), Retaining Wall ,Drain,Pathway etc. |
| 6 | BoQ5 Schedule 'C'- Supply of Cement |
| 7 | BoQ6 Schedule 'D'- Supply of Reinforcement Steel |
| 8 | BoQ7 Schedule 'E'- Road Works |
| 9 | BoQ8 Schedule 'F'- Non Schedule Items (SUPPLY OF BALLAST, LAYING & LINKING, PACKING etc.) |
| 10 | BoQ9 Schedule 'G'- (P-WAY DISMANTLING, AT WELDS ) |
| 11 | Earthwork in CuttingSECR USSOR 2021 item N0-012010:-Earthwork in cutting in formation, trolley refuges, side drains, level crossing approaches, platforms, catch water drains, diversion of nallah & finishing to required dimension and slopes to obtain a neat appearance to standard profile inclusive of all labour, materials, plant & machinery, leading all cut spoils either to make spoil dumps or for filling in embankment with leads within 2 km on either side of edge of the cutting(s) including all lifts, ascent, descent, loading, unloading, bailing & pumping out water, if required, clearance of site and all other works incidental thereto for completing the work as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest updated correction slips and to the satisfaction of the Engineer-in-Charge.Note:(i) All usable earth arising from cut spoils shall be led into bank formation and Unusable spoils shall be dumped / stacked away from toe of embankment.(ii) All hard rock /and boulders not fit for filling will be stacked by the contractor and will be property of the Railways.(iii)Cut trees shall be property of Railways and to be deposited in the railway godown unless specified otherwise in the Conditions of Contract.In all conditions and classifications of soil except rock |
| 12 | SECR USSOR 2021 item N0-012011:-In all conditions and classifications of soil except rock |
| 13 | Earthwork in FillingSECR USSOR 2021 item N0-011032:-Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, platforms etc. with contractor's own earth conforming to Soil Quality Class SQ1/SQ2/SQ3, after preparation of foundations as applicable, benching in existing banks wherever required, spreading in layers with motor grader, bringing the moisture content to OMC, mechanical compaction to specified density and dressing of bank to final profile as per RDSO Specifications: RDSO/2020/GE: IRS-0004 with latestcorrection slips.Note:1) Foundation preparation, Benching including additional earthwork on account of this, wherever required, shall be paid extra under relevant schedule item for benching.2) Payment for Earthwork under this item shall be made based on the cross section measurements calculated (i) with original ground profile of existing bank based on initial ground levels before doing benching and (ii) final profile of the bank worked out with final levels as per prevailing guidelines.3) The rate is inclusive of all the taxes including royalty |
| 14 | BlanketingSECR USSOR 2021 item N0-012040:-Mechanical Manufacturing of blanketing material by wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS- 0004 with latest correction slips.Note:Rate is inclusive of following1) Additional materials blended to bring blanket to enclosing envelop as specified in RDSO/2020/GE: IRS-00042) Royalty of moorum and other blending minerals used |
| 15 | Felling TreesSECR USSOR 2021 item N0-013010:-Felling trees of girth (measured at a height of 1.0 m above ground level) including leading and stacking of material within 100m. Note : 1. When stumps are grubbed up in addition, the rates shall be doubled for trees cut and grubbed 2. Payment for grubbing shall only be made where specially ordered.3. Grubbing shall be ordered only where it is essential to remove the stumps, including the roots, as per specification. 4. Cut trees shall be property of Railways and to be deposited in the railway/MCL directed area unless specified otherwise in the Conditions of Contract |
| 16 | SECR USSOR 2021 item N0-013011:-Girth over 30 cm and up to 60 cm |
| 17 | Barricading SECR USSOR 2021 item N0-013040:-Providing portable fencing along running track where work is to bedone in close vicinity of track, maintaining during execution of workand removing after completion of the work as per direction of theEngineer. Fencing shall consist of self supporting steel angles of size50mm x 50mm x 6mm, 1.5m long provided with hooks etc. andembedded in CC 1:2:4 block of size 0.23m x 0.23m x 0.23m placed atc/c distance of 2m along track. 12mm dia rods in three horizontallayers shall be tack welded with angle posts.Note : Released material will be property of the contractor aftercompletion of work. Cost of cement required for CC blocks shall bepaid separately. |
| 18 | SECR USSOR 2021 item N0-013041:-With provision of one 50mm wide retro-reflective tape in horizontaldirection, duly secured/tight with vertical posts. |
| 19 | Earthwork in ExcavationSECR USSOR 2021 item N0-022010:-Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300 m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge.Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines and Approach road etc |
| 20 | SECR USSOR 2021 item N0-022011:-All kinds of soils |
| 21 | SECR USSOR 2021 item N0-022012:-Soft rock (not requiring blasting) |
| 22 | Plain Cement Concrete 1:3:6SECR USSOR 2021 item N0-022060:-Providing and laying Plain Cement Concrete 1:3:6 with graded stoneaggregate of 40mm nominal size, in foundation and floors, retainingwalls of bridges including mechanical mixing, vibrating, pumping andbailing out water where ever required with all materials and labourcomplete but excluding the cost of cement and shuttering as perdrawings and technical specifications as directed by Engineer.Note :1)This item will also operated for building works ,drain, pathway ,retaining wall etc.2). Rate is inclusive of Royalty of minor minerals used |
| 23 | Providing M20 concrete (Substructure)SECR USSOR 2021 item N0-024020:-Providing and laying in position machine batched, machine mixed and machine vibrated Design Mix Cement Concrete, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, of specified grade (cast in-situ) using 20mm graded crushed stone aggregate and coarse sand of approved quality in Drop and curtain wall and alike structures below bed level, complete in all respect as per drawings and technical specifications to the satisfaction of Engineer-in-Charge. Note: 1.Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item.3.This item will also operated for drain, pathway ,retaining wall,bridges etc.4.Rate is inclusive of Royalty of minor minerals used |
| 24 | Provding M25/M30/M35/M40 Concrete (Cast Insitu/Precast)SECR USSOR 2021 item N0-024010:Providing and casting machine batched, machine mixed and machine vibrated Cement Concrete of specified grade (M25/M30/M35) as per approved Design Mix, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, (Cast in-Situ/Pre-cast) in bottom/top slab, side walls, toe wall, Retaining wall and sumps haunch filling head walls, thrust bed or any other component using 20mm graded crushed stone aggregate and coarse sand of approved quality of RCC box of any size including finishing, Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings and technical specifications as directed by Engineer in charge.Note:Payment for cement, reinforcement and shuttering shall be made extra under relevant item.Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item. |
| 25 | SECR USSOR 2021 item N0-025030:Centering and shuttering including strutting, propping etc. and removal of form for: |
| 26 | SECR USSOR 2021 item N0-025031:All types of Retaining wall or bridge sub-structures, e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level |
| 27 | SECR USSOR 2021 item N0-025033: Extra for additional height over item no. 025031 wherever required with adequate bracing, propping etc. over initial height of 5 metres for every additional height of 1 metre or part thereof. |
| 28 | SECR USSOR ITEM-031120 Casting and installation of single/twin RCC box of all sizes with orwithout common web section including design of pushing scheme, thrust bed, casting of all RCC components, with specified grade of controlled concrete, pushing it in correct position and alignment below Railway track/Road following all measures of track safety by “Box pushing technique\\" as per approved drawings/scheme, with or without surcharge in all types of soils with disposal of surplus earthaway from vent up to 1 Km, fixing arrangement for all services & utilities including parapet walls on both sides, wearing course, footpaths, plaques, drainage arrangements etc. and all other incidentalworks to complete the ROB/RUB/Canal crossing in all respect as per specifications to the satisfaction of Engineer-in-Charge.Note:1. The rate includes all items of work/supplies for complete job in allrespects except \\"cost of Reinforced cement concrete, cement, reinforcement & shuttering\\" of (i) main RCC Box; (ii) Thrust Bed; (iii) Footpath (iv) Parapet wall and (v) wearing Course only, which shallbe paid extra under relevant items of USSOR.2. In case Drag Sheet and/or Rail Cluster are to be used as per approved scheme and design, the same shall be paid extra underrelevant item.3. The payment for this item shall be made for the clear inner cross section area of the parent RCC Box/Boxes and barrel length i.e. clearinner volume of parent RCC Box/Boxes. |
| 29 | SECR USSOR ITEM-031140 Casting and installation of single/twin RCC box of all sizes with orwithout common web section after supporting the track on temporarygirders including design of pushing scheme, thrust bed, casting of allRCC components, with specified grade of controlled concrete,pushing it in correct position and alignment below Railway track/Roadfollowing all measures of track safety by “Air pushing technique\\" asper approved drawings/scheme, in all types of soils with disposal ofsurplus earth away from vent up to 1 Km, fixing arrangement for allservices & utilities including parapet walls on both sides, wearingcourse, foot paths, plaques, drainage arrangements etc. and all otherincidental works to complete the ROB/RUB/Canal crossing in allrespect as per specifications to the satisfaction of Engineer-in-Charge.Note:(1) The rate includes all items of work/supplies for complete job in allrespects except \\"cost of Reinforced cement concrete, cement,reinforcement & shuttering\\" of (i) main RCC Box; (ii) Thrust Bed; (iii)Footpath (iv) Parapet wall and (v) wearing Course only, which shall bepaid extra under relevant items of USSOR.(2) The CC Cribs as required and Temporary Girder shall be suppliedby Railways at available location.(3) Transportation of Temporary Girder to site shall be paid separatelyunder relevant item..(4) The payment for this item shall be made for the clear inner crosssection area of the parent RCC Box/Boxes and barrel length i.e. clearinner volume of parent RCC Box/Boxes. |
| 30 | SECR USSOR ITEM-031121 Extra for using GI Drag Sheet, 1.50 mm thick, for protection of trackfrom subsidence while pushing the box as per design over item no.031120.Note: The payment for this item shall be made for the clear innercross section area of the parent RCC Box/Boxes and barrel length i.e.clear inner volume of parent RCC Box/Boxes.Extra for using GI Drag Sheet, 1.50 mm thick, for protection of trackfrom subsidence while pushing the box as per design over item no.031120.Note: The payment for this item shall be made for the clear innercross section area of the parent RCC Box/Boxes and barrel length i.e.clear inner volume of parent RCC Box/Boxes. |
| 31 | SECR USSOR ITEM-191020 Insertion of temporary girder in place of formation involvingdismantling of track, removal of ballast and neatly stacking for futureuse, excavation & installation of CC crib or wooden crib at both endsas per approved design in one or more traffic blocks, excavation forcreating space for insertion of girder as required, placement of girderby contractor’s Crane, tools & plants, filling of earth/sand filled bagsat different stages as required, linking of track and connecting withthe approaches, ballasting, boxing and packing approach sleepers tomake track fit for 20 kmph to the satisfaction of Engineer in-charge.Note:1. The CC Cribs as required and Temporary Girder shall be suppliedby contractor at available location.3. The charges for wooden sleepers/blocks required for matting andbearing as per approved design shall be paid extra as per relevantitem.4. In case bridge timber / channel sleepers are required to be laid ongirder, the same shall be paid separately under relevant item. |
| 32 | SECR USSOR ITEM-191022 RH /Temporary girder of length above 16.3m and up to 26.00 usingRoad crane capacity of 80 MT |
| 33 | SECR USSOR ITEM-191030 Manufacturing and using wooden sleepers/blocks required for matting and bearing as per approved design for use below and above CC Crib for insertion of Temporary Girder etc..Note:The item is for one time use and released wooden sleepers/blocks shall be the property of the Contractor. |
| 34 | SECR USSOR ITEM-191040 Removal of temporary girder, crib on both ends and placing |
| 35 | SECR USSOR ITEM-191042 RH /Temporary girder of length above 16.3m and up to 26.00 usingRoad crane capacity of 80 MT |
| 36 | SECR USSOR ITEM-041370 Supplying, fabricating, and erecting welded, bolted, and/or riveted steelwork in built-up sections, trusses, framed work, staging, racks, height gauges, etc., for steel structures other than bridge girders. The work shall be executed using RSJs, tees, angles, channels/flats, plates, gussets, round or square bars, cleats, bolts, etc., with the contractor’s own steel. The scope includes cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, and bolting, as well as providing stiffeners wherever required as per approved drawings. A priming coat of approved steel primer shall be applied. All contractor’s materials, labour, tools, plants, lead, lift, and crossing of tracks (if required) are included, and the work shall be completed as per specifications and as directed by the Engineer-in-charge.Note: Payment shall be made on the theoretical weight of the main components and gusset plates only. |
| 37 | SECR USSOR 2021 item N0-022070:Providing and fixing Weep Holes in Abutments, Wing walls and Return walls etc., of new bridges with 110mm dia UPVC pipe Type A ISI marked with all contractor's men, material, transportation, all taxes as per specifications and as directed by Engineer-in-Charge. |
| 38 | SECR USSOR 2021 item N0-052250:Providing Boulder Backing behind wing wall, return wall, retaining wall with hand packed boulders & cobbles with smaller size boulders toward the back including all lead, lift, labour & other incidental charges as complete work in all respect. Payment for boulder/cobbles will be done extra. |
| 39 | Supply of BouldersSECR USSOR 2021 item N0-051030:Supplying of stone boulders weighing not less than 35 kg each atspecified bridge locations. (Including Royalty) |
| 40 | Stone PitchingSECR USSOR 2021 item N0-051070:Providing and laying Pitching with Stone Boulders, weighing not less than 35kg each with voids filled with cement sand mortar 1:4 on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications (filter media to be paid separately under the relevant item). Note :1.Rate is excluding cost of cement which shall be paid extra under relevant item2.Rate is inclusive of Royalty of minor minerals used |
| 41 | Filter MaterialSECR USSOR 2021 item N0-051080:Providing and laying Filter Material as per RDSO Specifications underneath pitching in slopes complete as per drawing and Technical Specification.Note : Rate is inclusive of Royalty |
| 42 | Filling of Coarse SandSECR USSOR 2021 item N0-052040:Supply and laying of coarse sand including consolidation with all labour, lead, lift, tools, plants, crossing of tracks as per drawing and technical specification as directed by the Engineer in charge in case loose slush is encountered at site of foundation before casting the foundation or laying the filtering media.Note : The rate is inclusive of Royalty |
| 43 | SECR USSOR 2021 item N0-211230:Supply, filling and stacking of sand bags layer by layer filled with Sand/quarry dust in Contractor's empty polythenecement bags of 50 kg bags with all contractors labour, tools, plants,lead, lift etc., including stitching the same with machine usingpolythene thread complete as directed by Engineer-in charge at site. |
| 44 | SECR USSOR 2021 item N0-013070:Driving rails 90R/52 Kg section below average ground level within theslope/toe of embankment including making of nose with contractor’sown arrangement complete in all respectNote: Payment will be made as per actual driven length of rail whichwill be supplied free by MCL at the site of work. |
| 45 | SECR USSOR 2021 item N0-052200:Painting the HFL markand Danger levelmark,year of HFLon bridge abutments and piers with ready mixed paint asper standard in two coats over one coat of primer with all materials, labour, tools, scaffolding, all lead and lift etc. including writing complete. |
| 46 | Bridge PlaquesSECR USSOR 2021 item N0-052210:Providing cast in situ bridge number plaques as per Railway drawing in cement concrete 1:2:4 mix using 20mm hard stone aggregate embedded in 30mm notch in Bridge parapet coping duly engraving the letter and figures and an arrow indicating the direction of flow and finishing the top exposed surface with cement mortar 1:3, painting letters and figures with two coats of black enamel paint on two coats of white background with all labour, tools, cement, paint etc. with all leads and lifts. |
| 47 | RCC Hume PipesSECR USSOR 2021 item N0-052230:Providing & laying non pressure NP-4 Class RCC pipe with collars, jointing with 1:2 cement and ordinary sand mortar including testing of joints, but excluding earthwork with all labour and material as a complete job. Cement for mortar will be paid separately. (Pipes of 600mm dia and above will be laid using crane/hydra). |
| 48 | SECR USSOR 2021 item N0-052233:600mm Dia |
| 49 | SECR USSOR 2021 item N0-195070:Fabrication, supplying and fixing 600mm x 450mm Bridge Board made from 16 SWG MS Sheet duly welded or riveted to back support of two 600mm long horizontal angles of size 25mm x 25mm x 3mm & two numbers 2.5 metre long vertical support of MS Angle of size 50mm x 50mm x 5mm, welded / rivetted to board. Vertical supports shall have split ends for proper fixing in ground. Vertical supports of board shall be embedded in ground in M 20 Cement Concrete blocks of size 300mm x 300mm x 300mm, complete job including painting & writing of subject matter on bridge board, as directed by Engineer - In charge. Note: Excavation & concrete work will be paid separately. |
| 50 | SECR USSOR 2021 item N0-025020:Providing and applying two coats of coal tar or bitumen confirming to IS:3117– latest version on the top and sides of RCC box/slabs @1.70 kg/sqm after cleaning the surface with all labour and materials complete job as directed by the Engineer. |
| 51 | SECR USSOR 2021 item N0-052070:Grouting of masonry/concrete by injection process duly Sealing of cracks, through nipples complete as per Technical Specification andprocedure given in IRBM Para No 209 including necessary admixture.Payment shall be as per use of cement by weight in case of neatcement/cement mortar grouting and weight of Epoxy in case of EpoxyGrouting. (Cement will be paid extra). |
| 52 | SECR USSOR 2021 item N0-052073:Epoxy Grout |
| 53 | Filter MediaSECR USSOR 2021 item N0-052150:Providing and laying of filter media consisting of granular materials of GW, GP, SW groups as per IS:1498 (latest) in required profile behind boulder filling of abutments, wing walls / return walls etc. above bed level with all labour and material complete job as per drawing and technical specification of RDSO Guidelines.Note : Rate is inclusive of Royalty |
| 54 | DSR 2023 ITEM NO-13.52.2: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriatepriming coat, preparation of surface, etc. complete.On concrete work |
| 55 | SECR USSOR 2021 item N0-025070:-Supply and using Cement at Worksite |
| 56 | SECR USSOR 2021 item N0-025072:-Ordinary Portland Cement 53 grade of approved brand/make |
| 57 | SECR USSOR 2021 item N0-025080:-Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 58 | SECR USSOR 2021 item N0-025082:-Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brands/makes. |
| 59 | DSR ITEM 2.31 :-Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 60 | DSR ITEM 16.1 :-Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 61 | DSR ITEM 16.79 :-Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge |
| 62 | DSR ITEM 15.30:-Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge. |
| 63 | DSR ITEM 16.59.1:-Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC:67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with support length of 3750 mm. |
| 64 | Supply of Track ballastSupplying & stacking and spreading of 50 mm size Track Ballast (Machine Crushed Stone Ballast) all along and both sides of the siding alignment and at the locations nominated by the Engineer-in charge. The rate shall include all lead, lift, loading, unloading, stacking & spreading at desired location etc. complete. This item shall confirm with relevant special conditions and as per specification and as approved by the Engineer in charge. 75% of payment of ballast as per accepted rate shall be made after supply and stacking at site on levelled and cleaned surface and remaining 25% will be paid after spreading, dressing and bringing it to the correct profile.Note : Rate is inclusive of Royalty |
| 65 | Track LinkingLaying & linking of fishplated BG straight or curved track with 60/52 kg rail section and concrete sleeper with sleeper density 1660 per KM with standard fittings ensuring correct spacing of sleepers, fixing & tightening of fish bolts & nuts and maintaining proper gauge, alignment, level (both cross & longitudinal) expansion gap at rail joints, superelevation where necessary and with one round initial through packing.The rate should be inclusive of transportation of rails from RITES/MCL stocking points/stores to site of work as required, cutting of rails as required on straight and curve track for squaring of joints, drilling holes on web using proper template for fish plated joints, chamfering of drilled holes, greasing and oiling of fish plates & fish bolts and nuts and at fishing zone of the rail ends including supply of grease oil etc. Maintaining of sleeper spacing, versine, superelevation etc. shall also be marked by the contractor with yellow and black paint at his own cost.The work has to be carried out as laid down in IRPWM and as per direction of the Engineer-in-charge at site. The unit of track metre consists both side rails, sleepers and all other fittings required thereof including provision of reference pillar at 100 mt apart on cess of the formation, tools and plant, labour, lead, lift etc., complete before opening to allow 20 kmph speed and as directed by EIC. |
| 66 | Packing of Track:Manual through packing of newly laid tracks including level crossings, on straight or curve to a good geometry to conform to specified alignment & level and other track parameters including squaring of sleepers, slewing of tracks to correct alignment, gauging, tightening of fittings, fixing them in correct position, lifting of track if required to obtain the required longitudinal/cross levels and designed ballast cushion, packing below the sleepers & boxing to approved ballast profile with all tools & labours as a complete job. As the through packing is to be done on PSC sleepers track, all care be exercised to ensure that the sleepers are not damaged during packing. If the sleepers are damaged in the process of through packing the contractor will have to replace them at his own cost |
| 67 | a)First through packing |
| 68 | b)Second through packing |
| 69 | c)Third through packing |
| 70 | P.Way FIttingSupply and Fixing of 60 kg joggled fish plate to RDSO Drg. No. T-5849 (ALT-1) as per IRS T-1-2012 (latest) for use on welded joints for BG track with 60 kg Rails including bolts with Nuts of required size and numbers, single coil spring washers and special washers etc. conforming with specification as per drawing with latest alteration/ amendments. (One set of joggled fish plates comprise of (i) Joggled Fish Plates to RDSO Drg. No. T-5849 altr.1 = 2 nos. (ii) Bolts & Nuts to Drg. No. T-11513 = 2 nos. (iii) Single coil Spring Washer to Drg. No. T-10773 = 4 Nos. (iv) Special Washer = 8 nos. as in RDSO Drg. No. T-5849, altr. 1 (v) Clamp=2Nos (Specification is 2062-1992).The rate includes all charges loading, unloading, transportation with all lead, ascent, descent, handling, rehandling, etc., complete in all respect as per specification & direction of EIC |
| 71 | Dismantling of Rail SECR USSOR 2021 item N0-121010:Dismantling of existing LWR/SWR of any structure, removing rails, sleepers, fish plates, cutting of rails, segregation and stackingof released Rails, Sleepers and fitting at nominated location incountable manner within a free lead of 500m, levelling of ballast tocorrect profile for laying new track over it, all as per direction ofEngineer-in-Charge.Note:- The work will be carried out under Traffic Block |
| 72 | Drilling of HolesSECR USSOR 2021 item N0-161040:Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machineincluding chamfering with appropriate chamfering tools in all types ofrail section with contractor's tools & plants, equipment, consumablewith all lead & lift etc. complete, as directed by Engineer in-charge.Rail Drilling Machine will be as per RDSO Specification No.TM/SM/3, dated 24.04.1991. |
| 73 | Drilling of HolesSECR USSOR 2021 item N0-161042: On Running Line |
| 74 | AT WELDSECR USSOR 2021 item N0-091010:-Manufacturing and Supply of Alumino thermic welding portions of52Kg/60 Kg/60EI-R260 as approved by RDSO for welding of rails52Kg/60Kg/60EI-R260 kg for 25mm gap by the process of ATwelding along with complete accessories confirming to thespecification laid down in Indian Railway Standard specificationNo.IRST-19-2020 up to date correction slips with Single shot cruciblefitted with Automatic Tapping Thimble, 3 pieces pre fabricated mould(Zircon washed) manually pressed using compressed air petrol/LPGpre heating for execution of welding of rail joint as directed by theengineer in charge at site.Note:1. The accessories along with welding portion shall be supplied as perAnnexure-I of the IRUSSOR - 2021.2. Rate is inclusive of transportation. |
| 75 | AT WELDSECR USSOR 2021 item N0-091013:-For 60Kg/60EI- R260 rails |
| 76 | AT WELDSECR USSOR 2021 item N0-092010:25mm gap 'in-situ' welding during traffic block and finishing of weld tomeet the prescribed tolerances and pass all stipulated tests with allrequired labour, materials, consumables, tools, equipments etc. tocomplete the work in all respect as per IR's \\"Manual for FusionWelding of Rails by Alumino - Thermic Process\\" with latest correctionslips, including marking of welded joint, painting weld collar withanticorrosive paint, restoration of track near weld joint to originalposition and fixing of joggled fish plate at new weld, to be removedafter passing of weld in USFD test as directed by Engineer in charge.Note:1. Welding shall be carried out only by trained welder having validcompetency certificate using RDSO approved Alumino ThermitWelding Portions, 3 piece prefabricated mould (ZIRCON WASHED)manually pressed, Single shot crucible fitted with auto tapping thimbleand Compressed Air Petrol/LPG preheating technique as per RDSOSpecification No IRST/19-2020 with latest amendment.2. Hydraulic Weld trimmer shall be used for chipping and profileGrinder for finishing.3. Only required nos. of Joggled fish plates shall be supplied byRailway All other items required shall besupplied by the Contractor. |
| 77 | SECR USSOR 2021 item N0-092012:For 60 Kg/60EI - R260 grade Rail Please Enable Macros to View BoQ information |
