|
| 1 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level wit1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 3 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand |
| 4 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent |
| 5 | 15 mm dia. nominal bore (Medium) |
| 6 | 20 mm dia. nominal bore (Medium) |
| 7 | 25 mm dia. nominal bore (Medium) |
| 8 | 40 mm dia. nominal bore |
| 9 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) (Uniqu/DRP make) |
| 10 | 15 mm nominal bore |
| 11 | 20 mm nominal bore |
| 12 | 25 mm nominal bore |
| 13 | 40mm nominal bore |
| 14 | Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 4kg |
| 15 | 75mm dia pipe |
| 16 | 110mm dia pipe |
| 17 | Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2 |
| 18 | 75mm dia plain bend |
| 19 | 75mm dia door bend |
| 20 | 75mm dia cowl |
| 21 | 110mm dia plain bend |
| 22 | 110mm dia door bend |
| 23 | 110mm dia door Tee |
| 24 | 110mm dia Tee junction |
| 25 | Reducer Tee 110 mm dia to 75mm dia |
| 26 | Cowl 110 mm dia |
| 27 | 75mm dia Door Tee |
| 28 | Providing and fixing PVC floor trap of Finolex / Supreme OR equivalent |
| 29 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever require Single squatting plate with 5 liter P.V.C. automatic flushing cistern. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 31 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 32 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 33 | P/F PVC conection 450 mm long |
| 34 | P/F PVC conection 600 mm long |
| 35 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 37 | Flexible pipe 32 mm dia |
| 38 | Providing and fixing C.P fittings 15mm nominal bore and fixtures (Superior Type as per the make and design specified by the Engineer-In-Charge) |
| 39 | Pillar cock |
| 40 | Short nose bib cock |
| 41 | Long nose bib cock |
| 42 | Angle valve |
| 43 | C.P gratings 4\\" |
| 44 | Soap dish |
| 45 | C.P. towel rod 2'-0\\" |
| 46 | Towel ring 200 mm dia |
| 47 | handle 200mm |
| 48 | handle 150mm |
| 49 | tower bolt 150mm |
| 50 | tower bolt 100mm |
| 51 | Engage Plumber FOR DISMENTLING OG OLD DUCT PIPES AND REMOVING OF OLD GI PIPE AND SANITARY FITTINGS |
| 52 | Engage Sweeper FOR CLEANING OF DUCT |
| 53 | Providing and fixing BRASS ball valve |
| 54 | DISPOSAL OF MULBA |
| 55 | plumber engaged for removing of GI pipes before start of work and refixing of old GI pipes |
| 56 | labour engaged for shifting of dismantled material from working site to outside dumping site |
| 57 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: |
| 58 | 16mm OD pipe |
| 59 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Please Enable Macros to View BoQ information |
