|
| 1 | Clearance of site/Removal of vegatation, unhygenic waste, making the site workable for laying the layout of proposed Building- complete as per the directions of Engineer-in-Charge. Hiring Charge for Hydraulic excavator of 1 cum bucket |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations etc. including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete below Foundation including carriage. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation including carriage. |
| 5 | Filling in plinth etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering complete job. |
| 6 | Available earth filling in trenches |
| 7 | GSB filling under flooring in rooms |
| 8 | Sand filling under flooring in rooms |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position specified grades of reinforced cement concrete M-25 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto roof level. |
| 11 | All Work upto Plinth Level |
| 12 | All work above plinth level. |
| 13 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for:-foundation footing bases etc |
| 15 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 16 | Beams, Slabs etc |
| 17 | Suspended floors roofs landings balconies etc |
| 18 | Column pillar piers abutments posts and struts |
| 19 | Stair (Sloping/steps/sides)./Ramp |
| 20 | Edges of slab and breaks in floors and walls |
| 21 | Providing Two nos of ring type Soakage Pits with 3 feet dia, 10 feet depth, including excavation, disposal of excavated material, installation of rings including top cover complete as per the instructions of Engineer in Charge.(lmr) |
| 22 | Brick work with common burnt clay (non modular) bricks class designation 7.5 in in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar. |
| 23 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Deodar wood |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm shutter Second class Deodar wood |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows. Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class Deodar wood. |
| 27 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35 mm shutters Second class Deodar wood |
| 28 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35 mm shutters Second class Deodar wood. |
| 29 | Providing & Fixing of Glass of Saint Gobin or equivalent make of 3.5 to 4 mm thick |
| 30 | Ventilator (1'6\\" x 2') |
| 31 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: Beading to Fix Glass 50 x 12 mm |
| 32 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 33 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 35 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 36 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 38 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 39 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 41 | Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete : |
| 42 | 125x90x4.00 mm |
| 43 | 100x75x3.50 mm |
| 44 | Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 300x16x5 mm |
| 45 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 46 | Distempering interiors with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 47 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 48 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 49 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate |
| 50 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. |
| 51 | Providing & making of 4 \\" POP Ornamental corner cornice including cost of all material and labour. |
| 52 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in Kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 54 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 55 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 56 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 57 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 58 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 40 mm dia |
| 60 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 61 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 62 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 63 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 64 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 65 | Additional for master posts |
| 66 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. |
| 67 | Providing and fixing of 12mm thk budloo wood ceiling for soffit boarding including supporting budloo frame work complete. |
| 68 | Providing and fixing ridges or hips of width 60cm overall in colour coated sheets 0.63 mm thick fixed with polymer coated J or L hook, bolts and nuts complete |
| 69 | Providing and fixing plained eaves boarding. 2nd class kail wood 250 x 32 mm (nominal size ) |
| 70 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer. |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 72 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 450mm internal dimensions |
| 73 | Providing and Fixing 2 HP Water Motor(Crompton/Kirloskar or equivalent make) including M.S. Encased cabin (Size 1.5' x 1.5' x 1.5'), complete as per the instructions of Engineer in Charge |
| 74 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
| 75 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition. Budloo/ Fir Wood For Entrance Porch |
| 76 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/firwood excluding the cost of frame work which is to be paid separately. Changez Khani For Entrance Porch Please Enable Macros to View BoQ information |
