|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil. Boundary Wall |
| 2 | Earth work in excavation in foundation trenches or drains (not exceeding1.5m in width as 10sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed. all kind of soil. |
| 3 | Removal of excavated earth from site outside municipal limits including loading, unloading complete. |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 5 | Treatment of soil using chemical like round up for anti weeding laid in holes @ 300 mm c/c and consumpution @ 600 ml/ 10 Sqm |
| 6 | Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade |
| 7 | Excavating, supplying and filling of local earth (RBM)(including royalty)by mechanical transport upto a lead of 15 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 8 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 2.8.1 All kinds of soil : |
| 9 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 10 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S.designation 16 mm sieve |
| 11 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately) |
| 12 | Mixing earth and sludge or manure in proportion specified or directed by officer in charge. |
| 13 | Grassing with selection no.1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 14 | Rough dressing of the trenched ground including breaking clods. |
| 15 | Fine dressing of the ground |
| 16 | P/L of 200 mm Dia perforated PVC drain pipes of type B in trenches of min load bearing of min 6 kg per cm sq & perforations @ 0.15m c/c in 50% area of pipe. Whole Pipe to be covered with Geotextile Sheet of 200 micron & laid in required slope and wrapping of geo textile arround pipe with all fitting for the pipe. Testing of pipes for water flow to be carried out before covering with aggregates |
| 17 | Supply and installation of virgin geotextile ( 150-200 micron) to cover entire field before laying of aggregate base course. |
| 18 | P/L and compacting stone agrregates of different sizes to form contour and elevation to the desired level as per the Drawing and instruction of Engineer Iincharge (size 40 mm /20 mm/10mm ) down black stone aggregate up to a depth of 300 mm from below primary backing . Layers of stone to be rolled as per desired slope and compaction using 8-10 tonnes Road roller over open area & pitch roller over areas with drainage pipes. |
| 19 | Supply and installation of Synthetic Artificial Turf for Football field from a FIFA Preferred producer/ Standard Licence having polyethylene monofilament diamond shaped yarn, Pile height of 60-65mm, triple layered PU backing, stitch rate of 150-160 stitches per linear metre, UV Resistant Slit Film Yarn structure, Detex not less than 14,000 , Tape thickness not less than 130 microns, Pile weight not less than 1500 gms/sqm, total carpet weight not less than 1900 gms/sqm, OR AS APPROVED BY FIFA with Infill weight not less than 38 kgs/ sqm, (silica sand of 80/100 grade and SBR rubber granules of size 2- 4mm), total product weight not less than 40,000 gms / sqm. 100 mm wide Line markings should be pre tufted & made of coloured turf of same quality. Cost includes unloading and staging of rolls, sewing of seams with imported turf adhesive, infilling with appropriate dispensing machine, spreading and leveling equipment, brushing of fibers with hydraulic controlled equipment & Annual field maintenance of 3 years. (Regular Turf Brusing by mechanical brushing machine and adding silica sand ruber granulers where required, Joint/Seam rectification included in Annual Maintenance) |
| 20 | Supply and installation of multipurpose turf for cricket ptactice net wickets with PE texturised monofilament Yarn with minimum pile height of 14 mm of european make only with 5 years warrenty |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Footpath |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . All works upto plinth level 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregates) 40 mm nominal size (crushed) |
| 23 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for footpath |
| 24 | Providing and fixing G.I Chain link Fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer in Charge Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 25 | Providing and fixing Heavy Duty Net on top of ground |
| 26 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 27 | Supply and laying of PVC insulated and PVC sheathed / xlpe aluminium power cable of 1.1 KV grade of following sizes on surface / direct in ground including sand cushioning protective covering and refilling the trench as required as per direction of Engineer Incharge 16 sq. mm 2 core |
| 28 | Supply and laying of PVC insulated unsheathed bright annealed bare copper industrial cable for voltage grade upto 1100V as per IS694:1990 3 core 4 sq. mm |
| 29 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 30 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door SPN MCBDB |
| 31 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral 32 Amp |
| 32 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral 63 Amp |
| 33 | Installation, Testing and commissioning IP 67 Flood lights 200 watt minimum Luminous flux of luminaire 120 Lm/w, Colour temperature of 5700K, Neutral white, CRI > 80, 50,000 operating hours with PCLens and necessary wire for connection and other accessories required for fixing lights on existing Poles. Firm has to submit originallity certificate of material from OEM or Authorized Distributor with 05 years of warranty. |
| 34 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets |
| 35 | Supply and fixing of HDPE Spectators chairs with following chairs with following specification:- 1) seat dimension = 415mmx450mmx700mm (from ground ) with minimum 3mm and maximum 8mm wall thickness all over the profile .2) seat shell should be blow moulded high polyethylene with uv protection dual wall with air gaps gives comfort and softness while seating on the seat with molded insert M6 threaded nut to mount on the stand & water drain hole of dia 20mm.3) Mounting beam shall consist of 2 steel pipes of OD 34 & ID 28 mm 3 mm wall thickness with hot dip galvanizing to prevent from crossion in open air running across the length of desired length of seating .4) Mounting bracket =MS 203x40mm 3mm thickness metal embosed bracket inter locked by bolt and nut with pipe and bracket size 110x35mm with 3mm thick embosed bracket with hot dip galvanising to prevent from crossion in open air.5) Leg type =Floor mounted aluminium die casted (ADC12) Stand of 335x240mm for strong leg support with powder coated 50micron thickness 6)Mounting dimension =CTC can be managed with the mounting brackets on pipe to mount in different sizes which gives flexibilty of mounting CTC(minimum 420mm & maximum depending as per required space between 2 seats) |
| 36 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 37 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design |
| 38 | EPDM Rubber Flooring 25MM (19mm Sbr+6mm Epdm)( COMPLETE JOB) critical height 1m HSN 4017 kids play area |
| 39 | Deluxe Two seater SEE SAW Unit,1. Material : G.I pipe, 2. Colour : powder coated, 3. Pipe dimension : 5mm, 4. Seat Material : Plastic, 5. Size: 7ft x 2ft x 2ft |
| 40 | Outdoor Playground SWING 1. Seating capacity : Seater 2 2. Roof top : Without roof 3. Material : iron 4. Swing type : Round 5. Age group : 1 to 12 years 6. Seat type : Rubber belt 7. Brand : Trado play 8. Features : Powder coated |
| 41 | HANGING BAR Material : GI PIPE, Colour : Powder coated, Pipe dimesnion 5mm |
| 42 | OUTDOOR SQUARE NET CLIMBER 1. Material : GI PIPE 2. Pipe Dimesion : 5mm 3. Size : 8ftx 8ft x 8ft |
| 43 | Outdoor Slide, material : G.I pipe, ladde colour : powder coated, pipe dimension : 5mm , Slide Length : 10ft, Slide Width : 3 to 4 ft |
| 44 | 52mm thick cement concrete flooring with concrete hardener topping , under layer 40 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggrega te 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufact urer’s specifications , including cost of cement slurry and curing complete , but excluding the cost of nosing of steps etc. complete. |
| 45 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete on concrete |
| 46 | Basket ball pole fixed with 8 inches Round pipe pole and 30mm thick back board, Extension 2.2 mtr with Ring and net. |
| 47 | Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering , shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) steps |
| 48 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering , shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Benches (sculpture) |
| 49 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth leveAll work upto plinth level with: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) footing |
| 50 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) Columns |
| 51 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) underground water tank |
| 52 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 53 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. ize Angle 40 x 40 x 6 ( To be paid as per actual ) |
| 54 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 55 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement (footpath). |
| 56 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curviline ar portions of the building all complete as per the architectural drawi ngs with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigm ent of matching shade including rubbing, curing and polishing etc. a ll complete as sp ecified and as directed by the Engineer - in - Charge :Flamed finish granite st one slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 57 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching t he stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately) 30mm thick (columns) entry gate |
| 58 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 59 | Providing and fixing Ist quality ceramic glazed Floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (300mm x 300 mm) water cooler |
| 60 | Construction and cost of ornamental shelter ( Canopy) in circular shape in cement concrete work M-20 Grade (1/1.5:3) Mix in shape bamboos (giving benzetion looks) Including Pillars moulded and giving in trunk shape look sloping RCC roof in shape of bamboos including earth work Excavation and cost of material with leads lift and painting etc. ( the painting with varnish ) work should give natural dry look of bamboo colour complete the job in the cement bamboo type railing and in between pillars of 6 no.s as per below specification:- (i) Inner dia 19´-0´´(ii) Outer dia 22´-0´´(iii) Pillar 6 no’s 1’-0” dia and 9´-0´´ Ht. (iv) Sitting place RCC Slab all-round the shelter in 1´-6´´ width.(v) Ht. of Shelter ( Canopy ) 9´-0´´ from floor level to beam level.(vi) Minimum Ht. of railing – 3´-6´´(vii) Minimum depth of trenches for pillars from ground level = 3´-0´´ x 5´-6´´(viii) Minimum depth of trenches of walls between pillars =2´-0´´x 2´-6´´(ix) Ht.of plinth from lawn Ground -level = 1´-6´´(x) Cement Concrete 1:4:8 mix 40 mm stone aggregate under foundation bed and flooring.(xi) Flooring 50 mm thick using 20 mm stone aggregate. ( Complete Job ) |
| 61 | FRP customized playing ladder sculpture size: 13ft H x 10 ft W. These Sculpture is made up of Fiber Reinforced Plastic (FRP) 450 GSM in 3 layer with 4 to 6 MM thickness along with UV stabilized pigment and waterproof PU acrylic colours to protect from sunlight and rain. This Sculpture will be hollow from inside and will have MS support/Frame to give it long life. Key Features: FRP Material: - will be used Indian made brand Binani, Joshi, Octive Resin Material :- will be Indian made -brand Cystic FBD, Revix Delhi, Shakti resins Palwal Colour work: - inbuilt pigment along with PU waterproof colours will be used supplied by MRF Global, Sai paint FBD, Baba chemicals DL MS Material: - will be India brand made- it’s for support and will not be visible from outside MS approx. weight in total will be 200 KG to 350 KG per Sculpture will be used -included in this cost. In scope: clay model work, mould work, final Sculpture making, Finishing, installation at site, final colour work along with MS frame structure inside the sculpture and supervision for base making and fixings.(complete job). |
| 62 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 63 | Providing and fixing Pole hanging Dustbins of capacity 50 litres (each) or more made with HDPE /plastic in blue and green colour of approved make and design approved by the Engineer-in-charge complete with fixed type SS mounting frame made with SS hollow tubes as approved by the Engineer-in-charge, the cost includes embedding the frame in ground in a base of c.conc.(1:3:6) over a levelling course of cement concrete 1:5:10 cost of material, lids and carriage are all included in the rate. |
| 64 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. footing |
| 65 | Centering and shuttering including strutting, propping etc. and removal of form for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. Columns |
| 66 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.Underground water tank |
| 67 | Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls Under 20 cm wide. underground water tank |
| 68 | Providing and fixing on un-plasticized Rigid PVC rain water pipes : 75mm |
| 69 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm bend |
| 70 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.75 Single tee |
| 71 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.75 Single tee with door |
| 72 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.75 Floor Trap (Nahani Trap) |
| 73 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. |
| 74 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 75 | providing and fixing of 100 mm CP grating |
| 76 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not lessthan 810 gms |
| 77 | Providing and fixing CP brass Angle Valve for basin/wall mixer, gysers etc |
| 78 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15 mm nominal bore |
| 79 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm |
| 80 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 81 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20mm dia. nominal bore |
| 82 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. |
| 83 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 84 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 85 | Half brick masonry with common burnt clay (non - modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 86 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) columns |
| 87 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 88 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer water cooler structure |
| 89 | Supply and plantation of the foloowing trees 2ft-3ft ht well grown in polybags, including cost of plantation, transportation watering and maintaining for a period till roots are developed |
| 90 | 1. Polyalthia longifolia (Ashoka Tree) |
| 91 | 2. Foxtail Palm |
| 92 | 3. Ficus benjamina |
| 93 | 4. Plumeria |
| 94 | 5. Tecoma stans |
| 95 | 6. Grevillea robusta (Silver Oak) |
| 96 | 7. Callistemon citrinus (Bottle Brush) |
| 97 | 8. Golden Bottle Brush Topiary Plant |
| 98 | 9. Murraya paniculata hedge |
| 99 | 10. Dwarf Hibiscus |
| 100 | 11. Ixora |
| 101 | 12. Golden Juniper |
| 102 | 13. Buxus sempervirens (Boxwood) |
| 103 | 14. Hamelia patens |
| 104 | 15. Clerodendrum inerme hedge |
| 105 | 16. Tradescantia spathacea (Rheo) |
| 106 | 17. Dianella tasmanica 'Variegata' |
| 107 | 18. Syngonium podophyllum |
| 108 | 19. Chlorophytum comosum (Spider Plant) |
| 109 | 20. Alternanthera ficoidea |
| 110 | 21. Elephant Ear |
| 111 | 22. Dianella |
| 112 | 23. varsicolor |
| 113 | Providing and fixing monoblock pump 1 Hp of approved quality and make like crompton,havells,etc. |
| 114 | Providing and fixing of brass sprinkler irrigation system. Sprinker type : Rotors, Dia :12 mm, Length : 100m, Working pressure : 2 bar, Automatic grade |
| 115 | Providing and fixing of 3-4 seater cast iron garden benches , Min weight 50kg+ with mild steel hollow pipe and with powder coated colour |
| 116 | Providing and fixing of electrical motor including wires and switches for water cooler |
| 117 | Providing and fixing of water purifier complete job |
| 118 | Providing and fixing of water cooler (40ltr) with voltage stabilizer |
| 119 | Supplying, Installing, Testing and Commissioning of Solar powered outdoor ornamental lamp post light with high efficiency LED lights of life 30000 hrs or more. The entire assembly shall be integrated and easy to assemble with integrated automatic on/off sensors with operation time of 12 hrs. The solar panels shall thin film amorphous Silicon panels and shall be efficient in operating at 60 degrees temp and carry a warranty of 5 yrs or more and serviceable life of 10 yrs or more. The solar panel shall be mated to an integrated battery which can be installed easily at site. The body of the pole (Ht. 12 to 15 feet) as well as the suspenders (as many in number as approved by the Engineer-in-Charge) shall be hot dipped galvanized iron. Price in inclusive of Cement Conc. Base 1:3:6 with levelling course of 1:5:10 and the base plate affixed with suitable bolts and nuts. |
| 120 | Supply, Installation, Testing and Commissioning of Main Switch Cum Pedestal cum Distribution board. Timely distribution board 65 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 no. 63 amp TPN MCB, 1 no. 65 amp contactor, 1 HRC fuse, 1 No. Indicator having Rotary Switch, 1 No. 16 amp fuse base, 1 No. Timer switch and IP 52/56 Degree protection all items should be of same make / manufacturer including pedestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work (Reputed Make). |
| 121 | Supply, installation, testing and commissioning of waterproof path lights as per the design and type approved by the Engineer-in-charge with LED bulbs 14 Watt or more, complete with aluminium powder-coated metal body having minimum system luminaire efficacy of 100 Lm/W and IP65 or IP66. The luminaire shall be tested with LM-80 standard with a useful life of 50,000 Hrs at L70. Cost includes making all necessary connections and switches complete. |
| 122 | Wiring for circuit / submain wiring along with earth wire with the following sizes of FR/ HR PVC insulated copper conductor, single core cable, in surface / recessed medium class PVC conduit as required from distribution board to the first switchboard 2×2.5 sqmm + 1×2.5 sqmm earth wire |
| 123 | Supply, Testing and Commissioning with transportation at site of High Mast Light including 1 No. 11 m High Mast Pole suitable for 6 Nos. luminaires including foundation accessories. Wiring with 3 × 25 sq.mm PVC insulated copper conductor from junction box of pole to luminaires alongwith installation charges. Includes the mast supply price. The erection of pole with all accessories with the help of modern engineering practice. The specifications of pole is as under:Length Section: Bottom – 5.6 Mtr Middle – 2.7 Mtr Top – 2.7 Mtr Outside Diameter: Bottom: 165.1 × 4.50 mm Middle: 139.7 × 4.50 mm Top: 114.3 × 3.65 mm Protection Against Corrosion:The poles shall be coated with black bituminous paint conforming to IS:158-1968 throughout internally and externally upto the planting depth. Tolerance: Outside diameter of poles as nearly circular as possible and their diameter shall not vary by more than 1%. Earthing: Nut 10 mm dia welded at base plate including provided & fixing of 2.5 sq.mm copper cable and earth electrode. Factor of safety on breaking load is 2.5 size of the base plate duly welded at bottom. The mast shall have 4 Nos. 32 mm dia holes at 2.54 m above the base plate suitable to accommodate 6 to 8 Nos of 3core x 2.5sqmm conductor cables from control panel to luminaries dia of the adjustable ring = 1800mm of the steel pipe of the ring 50 mm dia. 4nos of support of 50 mm dia duly welded between inner periphery of the ring and the cap. The pole is to be erected in C.C. concrete in the ratio of 1:2:4 mix. The foundation is to be continued upto 2 ft above ground level in square/ round shape . The cap of the adjustable ring is such that it should be well fixed in top of the mast and give an overall aesthetic look to the mast. The cap of the ring shall be provided suitably with 6 Nos. nuts to facilitate tightening of the top of the mast.steel should be of good quality of weight 7.85g/cum factor of safety on crippling load 2 and and factor of safety on breaking load is 2.5 size of the baseplate duly welded at bottom.LED Luminaires Providing & fixing of IP-65 protected high power LED of 150 Watt flood light system (LED must be 125 lumens per watt) with 5 years warranty, single piece pressure die-cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles. High power LED of 3 to 5 watt each. Integrated protected driver with efficiency more than 85% and in compliance to BIS certification and trademark certificate. System level luminaire efficiency ≥125 lm/W. LED driver input voltage AC 120-270V, voltage cut-off ≥300V AC and auto-resetting safety. Power factor >0.95, THD <10%, driver current <750 mA. Driver shall have phase protection 4kV surge protection (internal) and 10kV external. System life of 50,000 burning hours with 70% of initial lumens maintained. CRI ≥70. Fixture shall be IS:10322 compliant. Manufacturer name/brand engraved/embossed/screen printed on die cast housing. Fixture shall be ISI marked. NABL setup for all testing facilities of LED fixtures. (LM-79 / LM-80 certificate/report) with label warranty of product/accessories from OEM. Cabling Work Supplying & laying of PVC insulated and PVC sheathed/XLPE Aluminium power cable of 1.1 kV grade of following size on surface/direct in ground including excavation, sand cushioning, protection covering and refilling the trench etc. as required including (Armoured cable) 35 sq.mm 2 core – 10.00 Mtr. Panel WorkProviding installation, testing and commissioning of Double Door type main panel made of CRCA Sheet outdoor type, cubical feeder panel with 1.5 mm thick sheet painted. |
| 124 | Removal of Malba (park) |
| 125 | Carriage of materials upto 10 Kms for Sand |
| 126 | Carriage of materials upto 10 Kms for Bajree |
| 127 | Carriage of materials upto 15 Kms for Bricks |
| 128 | Consultancy Charges for Architectural Consultancy / Structural Design if required |
| 129 | Add 3% for Operation and Maintenance of Park including Box cricket ground, Basket ball court, Kids play equipments and Lightings etc for 3yrs Please Enable Macros to View BoQ information |
