|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and amming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Rate for a lead upto 50 meter from cutting edge .All kinds of soil : |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | P/L of soling H/P including carriage. Complete job |
| 4 | Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (Including cost and carriage of all materials) |
| 5 | Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriage |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation, plinth and upto floor Level-V including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) the cost includes carriage up to the site of work |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. (Steel plates only) |
| 12 | 12 mm thick cement plaster in 1:6 cement mortar in walls using Fine sand. |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (matt) Size of tile 600x600 mm |
| 15 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 17 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 18 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 19 | aApplying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | Providing wood work in frames of doors, windows of silver wood. Complete |
| 22 | P/F of ISI marked 35 mm thick factory made solid core flush door. Including all fixtures fixed with screws, nails and hinges. Complete job |
| 23 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 24 | ppr 25 mm |
| 25 | ppr 25 mm union |
| 26 | ppr 20 mm |
| 27 | ppr 20 mm union |
| 28 | 100 mm pvc waste pipe(B Type) |
| 29 | 75 mm pvc waste pipe (B Type) |
| 30 | ppr ball valve 32mm |
| 31 | ppr ball valve 25mm |
| 32 | 40mm pvc pipe |
| 33 | pvc floor trap |
| 34 | Water closet indian |
| 35 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass single hole basin mixer |
| 36 | Vitreous china pedestal |
| 37 | CP angle valve |
| 38 | CP towel rail |
| 39 | CP soap tray |
| 40 | CP 100mm grating |
| 41 | PVC connection pipe |
| 42 | Cp waste coupling |
| 43 | Flexible waste pipe 1.25\\" |
| 44 | CP Short body bib cock |
| 45 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 46 | aluminium handle 8\\" |
| 47 | T bolt 8\\" |
| 48 | Link lock 8\\" for doors |
| 49 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 50 | Engagement of carpenter |
| 51 | Carriage of materials for 12Km lead by way of Mechanical transportation |
| 52 | Course Agg. |
| 53 | Bricks 35 Km lead Please Enable Macros to View BoQ information |
