|
| 1 | Supply & Fix Underwater light with 720 system lumens, IP68, IK08, Housing Made Up of Hard Chrome plated Stainless steel powder coated with High Purity lenses with glass, Mounting with screws, Must be installed under the water to prevent the light fom burning up because of overheating, External driver, RGBW Light. Cat No: LU04-151-60CCW-XX Make: WIpro, complete all as specified and as directed by Engr-In-Charge. |
| 2 | Supply install,testing & commissioning spot fountain 12WUnder-waterLight with 720systems lumens, IP68, IK08, Housing Made Up of Hard Chrome plated Stainless steel powder coated with High Purity lenses with glass, Mounting with screws. Must be installed under the water to prevent the light from burning up because of overheating along with DMX MasterController,withcompletelymade in India product. A standalone interface for installation in electrical DIN Cabinets with Din rails, which can control from512to1024andcan go up to 2048 channels on 1, 2 or 4 DMX universes. Arobust StandAlonemodeandawide range of trigger possibilities (RS232, Contacts, Clock, NODE x4 ports, Master/slave), USB-C Networks Ethernet, Internet, WIFI compatible when connected to a router Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone, Memory of Micro SD Card ( max. 256 GB ) and 8Mb Internal memory . Art-Net and sACN fromSDcard, including triggers (2x512).Amaster / Save Synchro (32 max wired / 128 max Ethernet) that Commands from the Contacts (speed, scene, dimmer, zone). Default startscene, Scene priority, Cross Fade time between scenes,AutomaticSceneRecoveryifthepoweris cut off and 16-bit and fine channel management. Triggers options of RS232 In/Out (16 characters maxforRS232triggers,commandsororders)and UDP / Ethernet triggers and commands (from SDK). Software Requirements with System Compatibility of Windows, Mac, iOS. Flexible, adaptable mounting options, Should be provided with light show authoring software, Direct line voltage power supports 100—240VAC, Minimum five configurable effects, Using light show authoring software to select from standard five effects, adjust effect settings such as color,speed, and brightness. IP20. Addressing & Programming inclusive and with two Year Warranty. Brand name shall be embossed one each lighting fixtures External driver.RGBWLight Isolated, constant Voltage type 120 W LED Driver enclosurein Extruded Aluminium metal enclosure . Driver shall be made in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum& should have large operating input voltage range of 150V to 300VAC(nominalratedvoltage–240V)with5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection,Thermal Shut-down protection with connecting & control cable 5-Core 5CDMXcable/PatchcordPatchEndcap1m IP67 S Type 5 Core Connector & 5Core T Type 5C DMX cable IP67 T Type 5 Core Connector as per site requirement & Industrial Protocol/Data Bus cable RS-485, 1 pair 24AWG(7x32) Tinned copper, PE Insulation, Overall Beldfoil + tinned copper Braid(90%) Shield, PVC Outer jacket, CM Make- Beldon as per site requirement , complete all as specified and directed by Engr-in- charge. |
| 3 | Supply, Installation, Testing and commissioning of DMX Master Controller, with completely made in India product. A stand alome interface for installation in electrical DIN Cabinets with Din rails, which can control fom 512 to 1024 and can go up to 2048 channel on 1,2 or 4 DMX universe. A robust stand alone mode and a wide range of triger possibilities (RS232, Contacts, Clock, NODE x4 ports, Master/Slave), USB-C Networks Ethernet, Internet, WIFIcompatible when connected to a router Multiple zone 10 Zone, play10 scene/sequence per time in stand alone, Memeory Micro SD Card (max 256 GB) and 8 mb internal memory. Art-Net and scan from SD Card, including triggewr (2x512). A master/slave Synchro (32 max wired Ethernet) that Commands from the Contacts ( speed, scene, dimmer, zone). Defaults start scene, Scene priority, Cross Fade time between scene, Automatic Scene Recovery if the power is cut of and 16 bit and fine channel management. Trigger options of RS232 In/Out (16 character max for RS232 triggers, commands or orders) and UDP/Ethernet triggers and commands (from SDK), software Requirements with System Compatibility of Windows, MAC, iOS. Flexible, adaptable mounting options should be provided with light show authoring software, Direct line voltage power supports 100-240 VAC, Minimum five configurable effects, Using light show authoring software to select from standard five effects, ajust effect setting such as color, speed, and brightness. IP20. Addressing & programming inclusive an with 5 yrs warranty. Brand name shall be embossed on each and every lighting fixtures.Cat No: WL-DMX-TOUCH-512, Make: Wipro complete all as specified and as directed by Engr-In-Charge. |
| 4 | Supply & fix Isolated, constant voltage type 120 W LED Driver enclosure in Extruded Aluminium metal enclosure. Driver shall be made in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaires. Output voltage of te driver 24 v dc. Driver efficiency should be greater than 85% at full load, THD <10 %, PF > 0.95 with Under and Over voltage Cutoff Protection and 440 V withstand for 8 hrs minimum & should have large operating input voltage range of 150 V to 300 V AC (nominal rated voltage-240 V) with 5 KV internal surge protection, Thermal Shutdown protection. Cat No: LG34-120-245AIP66, Make: Wipro complete all as specified and as directed by Engr-In-Charge. |
| 5 | Supply, installaiton, testing and commissioning of IP67 S type 5 Core connector 5C DMX cable/Patch cord Patch Endcap 1m, Cat No: C-5C-S-IP67, Make: Wipro complete all as specified and as directed by Engr-In-Charge. |
| 6 | Supply, installaiton, testing and commissioning of IP67 T type 5 Core connector 5C DMX cable/Patch cord Patch Endcap 1m, Cat No: C-5C-S-IP67, Make: Wipro complete all as specified and as directed by Engr-In-Charge. |
| 7 | Suppy and fix Industrial Protocol/Data Bus cable RS-485, 1 pair 24AWG(7x32) Tinned Copper, PE Insulation, Overall Beldfoil + Tinned Copper Braid (90%) Shield, PVC Outer Jacket, CM Make: BELDEN. complete all as specified and as directed. |
| 8 | Suppy and fix PVC insulated and FR PVC round sheathed, copper conductor (flexible) industrial cable,1100 volt, conforming to IS:694 of size 3 core and 2.5 sq mm with saddle inside flexible conduit complete all as specified and as directed. |
| 9 | Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar ,4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge. |
| 10 | Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. MCB with separate short circuit indication type Make Legrand Cat. Nos 811124 Or equivalent in Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge |
| 11 | Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Make Legrand Cat. Nos 811151 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge |
| 12 | Supply and fixing PVC flexible condite pipe of outer dia 1 inch , water proof having protection with IP 68. complete all as specified and as directed by engr-in-charge. |
| 13 | Supply & Fix Waterproof LED galaxy rope of 50m (Length of different color like warm white/Blue/Orange India Tiranga Make Crompton Cat PT No LSTGLRP120P65-WW/CDL/BLU/GRN/PNK/AMB/AQB (Strip) and 50 Meter roll complete all as specifed and directed. |
| 14 | Taking Down Existing logo with all accessories complete all as specified and as directed by Engr-in-Charge. |
| 15 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including trapozedial shape of brick work as in drain/ compound wall/ Culver or as per requirement all as specified and as directed by Engr-in- Charge. |
| 16 | M & L for 15mm thick cement plaster in CM 1:4 mixed with water prrofing compound @ 2% by weight of cement to have a smooth finish for laying of water profing membrance. (Note-WPC will be measured separetely) |
| 17 | Supply only integral water proofing compound |
| 18 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including15 mm cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed. |
| 19 | Supply and fix 15 mm toughned glass with 11 BRD logo/design inside the glass Panels, manufactured trough heat treatment to ensure hight srength and safty the glass shall be machine polished on all edges, free from sharpness, bubbles, waves or defects complete all as specified and as directed by Engr-in-Charge . ( Note:- The logo Shall be permanently embedded within the glass.(Not sticker/Paint ), resistant to weathering , UV rays , moisture and chemical action, maintaning clarity and colourfastness trougout its service life. ii) The glass shall be securly fixed into the prepare grooves / opening of the granite wall using suitable stainless steel clamps, fasteners and structural sealant sdhesive (UV resistance and flexible ) as per Manufactuurer's Specifications. iii) Edges shall be properly sealed with transprent silicon sealant to ensure water and dust proof , all fixiing shall be true too line, level and plumb complete including scaffolding , labour materials , adhesives , tools and tackles,and finishing to the satisfication of Engr-in Charge . |
| 20 | Supply and fixing brass latters 3 to 6mm thick height exc 100mm but not exc 300 mm on granite surfaces including material,Cutting , polishing , and fixing with adhesive /fasterner and finishing complete |
| 21 | Supply and fixing brass latters 3 to 6mm thick height n Exc 100mm on granite surfaces including material,Cutting , polishing , and fixing with adhesive /fasterner and finishing complete |
| 22 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out soft and loose soil complete all as specified and as directed by Engr-in-Charge. |
| 23 | Excavating over areas, n exc 1.5 m in depth; and getting out in soft /loose soil all as specified and as directed by Engr-in-Charge. |
| 24 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and as directed by Engr-in-Charge. |
| 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose Soil complete all as specified and as directed by Engr-in-Charge. |
| 26 | Removing surplus excavated materials/ debries to distance of exc. 1.5 m bu n. exc. 6 Km m and depositing where directed at a level n. exc. 1.5 m above the starting point. complete all as specified and as directed. |
| 27 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles, Complete all as specified and directed by Engineer-in-charge. |
| 28 | M & L Cement Concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in foundation, Filling on Mass concrete complete all as specified and as directed by Engr-in- Charge. |
| 29 | S&F Mild Steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 30 | Ditto all as per item No 29 above but 5mm dia and over up to & including 8 mm dia in stirrups, spacers & binders complete all as specified. |
| 31 | M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete all as specified. |
| 32 | M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete all as specified. |
| 33 | M&L M-20 using 20mm graded stone aggregate in for columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engr-in charge. |
| 34 | M&L M-20 using 20mm graded stone aggregate in for slabs sopported on walls ,beams and columns in floor s ,roofs, Shelves, Cooking platform and similar work etc complete all as specified and as directed by Engr-in charge. |
| 35 | M&L hardcore of gouge n exc n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in- Charge |
| 36 | M & L for 75mm thick Cement Concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed by Engr-in- Charge. |
| 37 | Supply and spreading sand under floors or in foundation including watering and consolidation complete all as specified and as directed by Engr-in - Charge. |
| 38 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with gray pigment cement set, jointed and pointed in neat cement slurry in floors complete all as specified and as directedby Engr-in-Charge ( Make:-M/s Mehtab,M/s NITCO, M/s CEME and any approved Make) |
| 39 | M & L for plain Cement concrete 1:2:4 type B0 ( using 12.5mm graded aggregate )as in coping , bed block and surface channel of drain all as specified and as directed by Engr-in- Charge. |
| 40 | M&L for rolled sections as in main trusses or cross beams, rafters, purlins of specifed angular/tubular section, beams or channel sections with flange plates caps, bases, cleats and other connections Fe-410 W (Gde E-250) quality B. |
| 41 | M & L for preparation for new or previously umtreated steel surfaces of any description, over 10cm in width or girth,not otherwise described for two coats of synthetic enamelled paint over a coat of red oxide or zinc chrome primer on steel surfaces etc, complete all as specified and as directed.\\" |
| 42 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor complete all as specified and as directed by Engr-in- charge. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment. |
| 43 | S&F in Repair Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge. |
| 44 | S&F in Repair bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge. |
| 45 | S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm for jhot and cold water Complete all as specified and as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
| 46 | S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm for jhot and cold water Complete all as specified and as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
