|
| 1 | Surface excavation n.exc 40cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed. |
| 2 | Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out hard dense soil, complete all as specified and as directed. |
| 3 | Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and as directed. |
| 4 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed. |
| 5 | Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and as directed. |
| 6 | M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete, complete all as specified and as directed. |
| 7 | M&L Plain Cement concrete Type B-2, 1:2:4 (40mm graded aggregate), in foundation, filling and mass concrete, complete all as specified and as directed. |
| 8 | M & L Brick work with sub class 'B' bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4, complete all as specified and as directed. |
| 9 | M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 10 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.(Note - W P C shall be measured and paid separately). |
| 11 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed. |
| 12 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 13 | M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed. |
| 14 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base, complete all as specified and as directed. |
| 15 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed. |
| 16 | M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar (1:4), complete all as specified and as directed. |
| 17 | S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed. |
| 18 | M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing, complete all as specified and as directed. |
| 19 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc, complete all as specified and as directed. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating Gl based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc, complete all as specified and as directed. |
| 21 | S&F European pattern Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc, complete all as specified and as directed. |
| 22 | S&F Plastic water closet seat, black, closed pattern with flat bottom cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed. |
| 23 | S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 24 | S&F 15mm bore medium graded Gl tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed. |
| 25 | S&F 20mm bore medium graded Gl tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed. |
| 26 | S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010, complete all as specified and as directed. |
| 27 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item complete all as specified and as directed. |
| 28 | S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, complete all as specified and as directed. |
| 29 | S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed. |
| 30 | S & F 150mm long aluminium anodised, barrel tower bolt ISI, complete all as specified and as directed. |
| 31 | S & F 150mm long aluminium anodised cast type alumiinium handle SI marked, complete all as specified and as directed. |
| 32 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe, complete all as specified and as directed. |
| 33 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 34 | S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore, complete all as specified and as directed. |
| 35 | S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs, complete all as specified and as directed. |
| 36 | S&F vitreous china urinal, Half Stall type, white (excluding flusing cistern, flush pipe and waste pipe, complete all as specified and as directed. |
| 37 | S & F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed, complete all as specified and as directed. |
| 38 | S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed. |
| 39 | S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed, complete all as specified and as directed. |
| 40 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 41 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 42 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and as directed. |
| 43 | S&F 100mm bore PVC (SWR) 'T 'any radius, complete all as specified and as directed. |
| 44 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed. |
| 45 | S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 46 | S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and as directed. |
| 47 | S&F mild steel framed work such as grills, frame work of water tanks FE 290 Gde E-165, complete all as specified and as directed. |
| 48 | S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed. |
| 49 | S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed. |
| 50 | S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed. |
| 51 | S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed. |
| 52 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), complete all as specified and as directed. |
| 53 | S & F Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 54 | All as per item above but 5mm dia and above including 10mm dia in stirrups, complete all as specified and as directed. |
| 55 | M&L pre-cast cement concrete Type B-1, 1:2;4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc, complete all as specified and as directed. |
| 56 | S&F CP basin mixer for hot & cold water supply and fixed, complete all as specified and as directed. |
| 57 | S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 58 | S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair, complete all as specified and as directed. |
| 59 | M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including , complete all as specified and as directed. |
| 60 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 61 | S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 62 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 63 | M&L for 100mm thick cement concrete type C-2, 1:3:6 (40mm graded agrregate) as in sub base of floors, finished even and fair over well/rammed/compacted earth, complete all as specified and as directed. |
| 64 | M&L for sand filling under floors or in foundations including watering and consolidation (50mm thick sand cushion bed), complete all as specified and as directed. |
| 65 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 66 | M&L for providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, rounded or chamfered on edges, complete all as specified and as directed. |
| 67 | LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users, complete all as specified and as directed. |
| 68 | S&F 10 User LLDPE septic tank conventional designed to carry sewae and sludge water, excavation in any type of soil,PCC 1:4:8 below foundation, vent shaft connection etc, complete all as specified and as directed. |
| 69 | Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in CM 1:4, RCC cover slab in M-25/RR Masonary/filling with brick bats, complete of size 1.8M dia x 3.00m deep complete all as specified and shown in drg No CESZ/TD-1078/2011. |
| 70 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth, complete all as specified and as directed. |
| 71 | M & L for plain cement concrete 1:3:6 type C-1 (20 mm graded crushed stone aggregate) as in copings and bed blocks, bed plates and the like including necessary formwork, complete all as specified and as directed. |
| 72 | M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed. |
| 73 | M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar (1:6), complete all as specified and as directed. |
| 74 | M & L 1:2:4 types B-1 (using 20 mm graded stone agg) as in coping etc, complete all as specified and as directed. |
| 75 | M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 76 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed. |
| 77 | M&L for for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished surfaces even and smooth, complete all as specified and as directed. |
| 78 | Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed. |
| 79 | Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc, complete all as specified and directed. |
| 80 | M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed. |
| 81 | M&L for providing cement concrete 1:3:6 type C1 using 20mm graded aggregate in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 82 | Framed brackets of angles or tees, rafter purlens with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified and as directed. |
| 83 | M & L Bands, straps, supports or stays for rainwater, ventilating pipes, ncluding bolts, hooks (stay), hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 84 | M&L steel iron base plate plugs, bolt and screw of Fe-410W (Gde-E-250 quality-A), complete all as specified and as directed. |
| 85 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable, complete all as specified and as directed. |
| 86 | M&L for Sub class \\"B\\" bricks laid dry width wise across the line of cable in treanchs as cable protection, complete all as specified and as directed. |
| 87 | Material & Laying cement concrete for foundation fillings and mass conctere type D-2 1:4:8 using 40 mm graded aggregate, complete all as specified and as directed. |
| 88 | Material & Laying cement concrete for copying of poles using B-1 (1:2:4), 20 mm graded aggregate, smooth finishing without using extra cement, complete all as specified and as directed. |
| 89 | Material & Laying cement concrete for foundation fillings and mass conctere type C-2 (1:3:6) using 40 mm graded aggregate, complete all as specified and as directed. |
| 90 | Supply and laying testing & Commissioning in trenches XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core, complete all as specified and as directed. |
| 91 | Supply and laying testing in trenches XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 Core, complete all as specified and as directed. |
| 92 | Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 2 core 16 Sq mm, complete all as specified and as directed |
| 93 | Supply and fixing 100 W LED New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver suitable for pole dia up to 58 mm, complete all as specified and as directed. |
| 94 | Supply and Fixing GI light grade tubing 40mm for UG cable upto junction box of security light pole with suitable size of clamps and cable laying in drains or open areas, complete all as specified and as directed. |
| 95 | Supply and fix loopin loopout fuse junction box of made out of thermo plastic Polycarbonate with IP 66/67 weather proof for outdoor installation (with knockouts of cable entry) protection with terminals and locking screw fitted with 3 phase with neutral copper Bus Bar, 415 Volts, 50Hz and 6A MCB SP, suitable for cables off sizes and fixing on steel tubular pole at a height not less than 1.5m above ground level with the help of clamps two nos of F1 20 x 3 mm and suitable nuts and bolts, complete all as specified and as directed. |
| 96 | Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (9.0 mtr long), complete all as specified and as directed. |
| 97 | Supply and fix PVC insulated unsheathed copper cable of size 1.5 Sqmm 3 core FR PVC for service connections from junction box to light fitting, complete all as specified and as directed. |
| 98 | Supply and fixing GI pipe, bracket for street light fittings made out of GI Pipe 40mm medium grade 1.20 m long bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and two coats of aluminium paint with a base coat of red oxide primer, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 99 | Supply and fixing GI pipe, bracket for street light fittings made out of GI Pipe 40mm medium grade 1.20 m long bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and two coats of aluminium paint with a base coat of red oxide primer, complete all as specified and as directed. Please Enable Macros to View BoQ information |
