|
| 1 | SITC pump set and Electrification |
| 2 | OD517457/2025-2026:Supply installation testing and commissioning of 7.5HP 9 stage submersible motor pump set product code V2P2055NTDM58 pc4C*09 model no. 7DIM/9 (Deccan Make or equivalent) with MAX head 174 Mtr anddischarge of 125 LPM at 165 Mtr with STD impellor using suitable type tools and plants including giving necessary connections as required |
| 3 | OD517448/2025-2026:Supply and providing LED indicator lamp (Red, Green, Black, Yellow, Orange colours) in the existing panel board and giving connection |
| 4 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N |
| 5 | 2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)8 way, Double door |
| 6 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 7 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 8 | 90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. |
| 9 | OD517451/2025-2026:Supply and providing Danger 415 V, 150 X 100 mm Enameled danger plates |
| 10 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 11 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 12 | OD517461/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required. |
| 13 | OD517460/2025-2026:Supply and providing 63A 2 way neutral link on existing meter board using suitable nut ,bolt etc. as required. |
| 14 | OD517456/2025-2026:Supply and fixing 63A Bakelite fuse holder with necessary bolt and nuts etc. as required |
| 15 | OD517462/2025-2026:Supply and providing 20-63A offset staggered HRC fuse link |
| 16 | 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm |
| 17 | 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm |
| 18 | 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm |
| 19 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 20 | 90.14.28.3:S & F Motor starters of the following ratingsThree phase DOL starters for 10HP motor |
| 21 | OD517447/2025-2026:Supply and fixing 50mm (2\\") UPVC flange in the existing suction/delivery pipe line using required leak proofing materials etc. as required |
| 22 | OD517445/2025-2026:Supply and fixing clamp made with 50x6mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well |
| 23 | OD517446/2025-2026:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well |
| 24 | OD517463/2025-2026:Supply and providing suitable stranded Steel rope for hanging the 10HP submersible motor pump set |
| 25 | OD517454/2025-2026:Supply and fixing 50mm 80 Sch ASTM Threaded Adaptor Male |
| 26 | OD517449/2025-2026:Supply and fixing 50mm 80 Sch ASTM Tee |
| 27 | OD517452/2025-2026:Supply and fixing 50mm 80Sch ASTM bend |
| 28 | OD517450/2025-2026:Supply, laying and fitting 50 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site, |
| 29 | OD517458/2025-2026:Supply and fixing 50mm ASTM socket 80 Sch |
| 30 | OD517453/2025-2026: Supply and fixing 50mm GM Non Return valve in the existing ASTM/GI pipe |
| 31 | OD517459/2025-2026:Supply and fixing 50mm GM Ball valve in the existing ASTM pipe Zoloto make or equivalent |
| 32 | OD517455/2025-2026:Supply and providing SS hook for binding service wire Please Enable Macros to View BoQ information |