|
| 1 | Work items identified; |
| 2 | Supply,Installation ,testing and commisioning of 9.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long(Set of 4 no.’s per pole) |
| 3 | Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). |
| 4 | Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm |
| 5 | Supply,Installation ,testing and commisioning Pre fabricate galvanized Four way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting |
| 6 | Supply,Installation ,testing and commisioning DK thermoplastic cable Junction/ Termination T boxes 8\\"x10\\"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on thebottom side of the pole. |
| 7 | Supply,Installation ,testing and commisioning 190 Watt LED Luminaries of IP 67 protection |
| 8 | Supply,Installation ,testing and commisionin gSurge Protector for the 120/190 watt LED type lighting fixture complete. |
| 9 | Supply,Installation ,testing and commisioning 3X1.5 mm 2 PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly. |
| 10 | Supply,Installation ,testing and commisioning HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavated material to an appropriate place. |
| 11 | LT 25 mm² 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. |
| 12 | Supply,Installation ,testing and commisioningLT 16 mm² 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. |
| 13 | Supply,installation,testing,fixing and commissioning of of high-quality integrated LED Street Light with system wattage of Supply of 45W (±3W) LED streetlight having single piece housing made of pressure die-cast aluminium allow (ADC12/LM6). The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted/welded/mechanically joined to the luminaire housing to ensure robust design. The luminaire shall have Integrated polycarbonate front cover/lens only. Fitting with glass front cover shall not be considered. The luminaire shall have dusk to dawn feature (Digital on & off control) basis longitude & latitude (No electromechanical components like relays/sensors shall be acceptable). The luminaire shall be IP66 & IK07 compliant. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. Control gear compartments shall be top maintainable only. The luminaire shall have The LED luminaire shall use LEDs with CCT 5700°K, CR≥70, SDCM≤5 & Life of 50K Hrs @ L70B50. The luminaire shall deliver minimum system efficacy of 120lm/w. The luminaire shall use Potted driver having THD≤ 10% (@ full load), PF≥ 0.95 (@full load), can survive Input voltage stress 440V for 8 Hrs, can survive Input voltage stress 320V for 48 Hrs, can survive Input voltage stress 100V for 48 Hrs, High Voltage cut-off @ 320V (±15V) with auto re-start at 300V to 315V, Low voltage cut-off ≤ 120V with Auto-Restart at 120V (±15V), Operating voltage of 140V to 270V, In-built Surge Protection of 4KV (CM & DM). The LED driver shall have efficiency ≥85%. The LED driver shall be BIS registered. The luminaire shall have 10KV SPD placed in-side the control gear box of the luminaire. The luminaire shall have Electrical Insulation of Class I. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer within 15 days of award of LOI. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approval: LM79 as per 2019 standard issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, IK Test report for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. The luminaire shall be with 5 years replacement warranty against any manufacturing defects /malfunctioning.with allied lighting fixtures,mounting suitable for side entry,pole mounting with bracket arm OD 35mm-42mm.With suitable length of 6.0 sqmm Almunium based flexible wire to be laid through flexible 3/4 inch conduit.The fixing of the items must be done using steel straps of adjustable size (20*0.7mm)with buckle as per reqirement (with earthing) |
| 14 | Supply,Installation ,testing and commisioning Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing25/16 sqmm cable circuits. |
| 15 | NOTE: 1.The rates quoted by the bidder for all the items shall be inclusive of GST/freight/insurance/storage/installation/testing and any other charges for improvement of Installation of high mast light at Graveyard near Babul Alim under the jurisdiction of ED Budgam, KPDCL. Please Enable Macros to View BoQ information |
