|
| 1 | Demolition of Reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in Colm complete all as specified and as directed. |
| 2 | Demolition of brick work built in cement mortar with all quinces the cleanly etc complete all as specified and as directed. |
| 3 | M&L for brickwork with fly ash modular size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and as directed. |
| 4 | M&L Brick work with fly ash modular size bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 6 | M&L rendering 10mm thick plaster in CM 1:6 on fair faces of brick or concrete surfaces(internal walls) finished fair and even without using extra cement complete all as specified and as directed. |
| 7 | M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and as directed. |
| 10 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and as directed. |
| 11 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished light shed, area of each tiles not exceeding 0.36 sqm, as in wall/ Skirtiing etc. over 10mm thick plaster in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 12 | M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm in floor etc,over 15 mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. |
| 13 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed. |
| 14 | S&F in repair Granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and & pointed in white or coloured cement to match the surfaces of tiles over and including rendering 10 mm thick in cement mortor 1:4 all as specified and directed. |
| 15 | M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces complete all as specified and as directed. |
| 16 | M&L for one coat of oil bound distemper white/coloured or tinted on old decorated surfaces of walls including preparation of surface by washing rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for two coat of oil bound emulsion distemper incl prepration of new plastered surface of wall over a coat of primer complete all as specified and as directed. |
| 18 | S&F in repair Vitreous Rectangular shaped bowl type Urinal back partition with glass frosted glass 8 to 10mm thick ,witth fixing accessories ,concealed installation box for urinal,exposed part kit of urinal sensor consis including fixing of and flush pipe including all fitting) complete( Make Jaquar model no URS-WHT-13263,SNR-CHR-51085C,SNR-CHR-51085K size 450 x 900) with grating and all necessary fitting etc complete all as specified and as directed. |
| 19 | S&F in repair virtuous china WHB counter table top size 480x380x140 mm with granite platform and supported over errecting bracket etc including Kubix prime tall boy Sensor faucet for wash basin ,waste coupling,Bottle Trap(with internal partion 32mm & flush pipe complete and all as specified and directed make as per catalouge Jaquar model no JDS-WHT-25909,SNR-CHR-35017PMEB,ALD-CHR-750L130 granite platform and supported over bracket etc complete all as specified and directed. |
| 20 | S&F in repair vitreous china wash down water closet rimless bowl with side flush cistern (Pedestal pattern) colour (including fixing of bolt flushing cistern and flush pipe including all fitting) including connection to trap, and to flushing pipe, anti-syphonage pipe,Seat cover etc. all as specified and as directed.complete make Jaquar model no OPS-WHT-7753S250UFSPMZ. all as specified and as directed. |
| 21 | S&F GI tubing medium grade with all fitting and fixed to wall ,ceiling or laid in floor etc complete of 15 mm bore pipe complete all as specified and as directed. |
| 22 | Ditto- all as per above item No 21.00 but 20 mm bore complete all as specified and as directed. |
| 23 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts all as specified and directed by Engr-in-charge. |
| 24 | S&F 15 mm fancy/concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repair 15mm bore Brass cp wall mixer for mixig hot & cold water screwed down , for iron pipe or for brass ferrule complete all as specified and as directed. |
| 26 | S&f In repair Angle valve chromium plated high pressure screwed for iron pipe and fixed in repairs complete all as specified and as directed. |
| 27 | S&F 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube complete all as specified and as directed. |
| 28 | S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete and all as specified and directed. |
| 29 | S&F in repairs shower rose 125 mm brass chromium plated with swivel joints complete and all as specified and directed. |
| 30 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge. (Make : ESS ESS) incl taking down old. |
| 31 | S & F glass shelf assembly consisting of 5.5mm thick shet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm complete all as specified and directed |
| 32 | M&L brass chromium plated tubular towel rail 20mm dia D type 600 mm long between flanges fixed Complete all as specified and directed. |
| 33 | S&F Bevelled edge mirror of size 600x450mm of selected quality glass 4mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed with wooden plugs with chromium plated screws including taking down existing mirror . |
| 34 | S & F for Soap dish, any type, fixed to plugs with chromium plated brass screws |
| 35 | S&F in repairs Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed. |
| 36 | S&F urinal spreader brass chromium plated complete all as specified and as directed. |
| 37 | S&F CP bottle trap 32 mm bore complete all as specified and as directed. |
| 38 | S&F automatic hand dryer complete all as specified and as directed. |
| 39 | S/F PVC(SWR)75mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed. |
| 40 | Ditto all as per above item No 39 but 110mm |
| 41 | S&F 75mm PVC (SWR) floor trap(S/P), plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 42 | PVC (SWR)bend 110mm bore complete all as specified and as directed. |
| 43 | PVC (SWR)bend 75mm bore complete all as specified and as directed. |
| 44 | Supply and fixed PVC (SWR) vent cowl, 100mm dia complete all as specified and as directed. |
| 45 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 46 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete in repairs complete all as specified and as directed. |
| 47 | Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed. |
| 48 | Taking down chowkats or frames not exceeding 1.5 Sqm and with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed. |
| 49 | Taking down shutter exceeding 2.00 Sqm (Without frame) & removing from site complete all as specified and directed. |
| 50 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing. |
| 51 | S &F Factroy made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with het moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as fap insert for top rial & bottom rail, Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing. |
| 52 | S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges etc. complete size /profile of frame as per IS complete all as specified and directed. |
| 53 | PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified. |
| 54 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides complete all as specified and directed. |
| 55 | Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified. |
| 56 | M&L for 12mm thick Block boards, grade 1 quality, exterior grade, decorative type with both faces, Ditto white lamination screw to timber/ MS frame work complete all as specified and as directed |
| 57 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Eng-in-charge. |
| 58 | S&F Anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as all as specified and directed by Engineer-in-charge.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately. |
| 59 | S&F Anodised aluminium window Mesh(Jali) with frame, side hung type with sash bars, aluminium sections weighing 0.55 kg/m |
| 60 | S & F Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 61 | Sheet glass 3mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete. |
| 62 | S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs complete all as directed at site. |
| 63 | Aluminium handles, cast type anodised 100mm size complete all as specified and as directed. |
| 64 | S&F aluminium anodised barrel tower bolt 150 mm complete all as specified and as directed. |
| 65 | S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified and directed |
| 66 | S & F 250mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alliminium allow and fixed sliding door bolts plate type extanlled black bright bolt not less than 12mm dia with and including a minimun 06 bolts and not less than plate and two on staple plate complete all as specified and as directed. |
| 67 | Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 7,125.00 Please Enable Macros to View BoQ information |
