|
| 1 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, having pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacture drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(Make Bajaj, Surya, Utkarsh) |
| 2 | Supply and fixing of factory wired integral LED Flood Light Luminiaries with die kart Alluminium Housing Built with driver set suitable for 100 to 120 Watt. Confirming to IP 65 Protection complete in all respects. CAT AAA (Havells, Phillips, Bajaj, Crompton) For 12.5 Mtr Pole |
| 3 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, having pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacture drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(Make Bajaj, Surya Utkarsh) |
| 4 | Supply and fixing of factory wired integral LED Flood Light Luminiaries with die kart Alluminium Housing Built with driver set suitable for 140 to 150 Watt. Confirming to IP 65 Protection complete in all respects. CAT AAA (Havells , Phillips , Crompton) for 16 Mtr Pole |
| 5 | Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, having pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacture drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (Make Bajaj, Surya Utkarsh) |
| 6 | Supply and fixing of factory wired integral LED Flood Light Luminiaries with die kart Alluminium Housing Built with driver set suitable for 170 to 200 Watt. Confirming to IP 65 Protection complete in all respects. CAT AAA (Havells, Bajaj, Phillips, Crompton) for 20 Mtr pole |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63MM DIA (OD-63NN& ID-51MM NOMINAL) |
| 8 | Supply and laying of aluminum conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the EngineerIncharge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc.10 sqmm 4core (Make Havells , Polycab , KEI) |
| 9 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti-corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.15 A TPN |
| 10 | Earthing with GI earth pipe 4.5 Mtr long, 40 mm dia includin accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcole, coke and salt as required. |
| 11 | S/F OF 25x 5 mm GI strip for earthing on G.I clamps on surface complete in all respect |
| 12 | Supply and laying 6 SWG G.I. Wire at 0.50 Meter below ground level for conductor earth electrode, including connection/termination with G.I. thimble etc. as required. |
| 13 | Providing and fixing of lighting conductor finial,made of 25mm dia 300mm,long, G.I. tube having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes, etc. complete as required. |
| 14 | Providing and fixing G.I. tape 20mm.x3mm. On paarapet or surface or wall for lighning conductor complete as required.(For vertical run) |
| 15 | Supply and fixing of Aviation Ligh as required. Please Enable Macros to View BoQ information |
