|
| 1 | Rewinding of submersible pump motor of 35 HP with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for Six Month. |
| 2 | Rewinding of submersible pump motor of 60 HP with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for Six Month. |
| 3 | 60 H.P.Motor Bush |
| 4 | 35 H.P.Motor Bush |
| 5 | 15 H.P.Motor Bush |
| 6 | 15 H.P.Motor Ball Bearing |
| 7 | 7.5 H.P.Motor Ball Bearing |
| 8 | 3 H.P.Motor Ball Bearing |
| 9 | 1 H.P.Motor Ball Bearing |
| 10 | 15 H.P.Motor Connection Plate |
| 11 | 7.5 H.P.Motor Connection Plate |
| 12 | 3 H.P.Motor Connection Plate |
| 13 | 1 H.P.Motor Connection Plate |
| 14 | 15 H.P.Motor Impellar |
| 15 | 7.5 H.P.Motor Impellar |
| 16 | 3 H.P.Motor Impellar |
| 17 | 1 H.P.Motor Impellar |
| 18 | 60 H.P.Thrust Plate |
| 19 | 35 H.P.Thrust Plate |
| 20 | 60 H.P.Motor Contactor |
| 21 | 35 H.P.Motor Contactor |
| 22 | 15 H.P.Motor Contactor |
| 23 | 7.5 H.P.Motor Contactor |
| 24 | 3 H.P.Motor Contactor |
| 25 | 1 H.P.Motor Contactor |
| 26 | 60 H.P.Motor Relay |
| 27 | 35 H.P.Motor Relay |
| 28 | 15 H.P.Motor Relay |
| 29 | 7.5 H.P.Motor Realy |
| 30 | 60 H.P.Motor Timer |
| 31 | 35 H.P.Motor Timer |
| 32 | 15 H.P.Motor Timer |
| 33 | 7.5 H.P.Motor Timer |
| 34 | MCB 100 A |
| 35 | MCB 200 A |
| 36 | 35 HP VT Pump S.S.Shaft 2 M |
| 37 | 35 HP VT Pump Bush |
| 38 | 35 HP VT Pump Gun Metal Bush |
| 39 | 35 HP VT Pump Rubber Bush |
| 40 | 35 HP VT Pump Guide Slider Bush |
| 41 | 35 HP VT Pump Line Shaft 1.5 M |
| 42 | 35 HP VT Pump T.T.Plate Bush |
| 43 | 35 HP VT Pump Strainer |
| 44 | 35 HP VT Pump Neck Ring |
| 45 | 35 HP VT Pump Alignment |
| 46 | 35 HP VT Pump Check Nut |
| 47 | Supplying of 60 HP Motor Starter Panel |
| 48 | Supplying of 35 HP Motor Starter Panel |
| 49 | Supplying of 15 HP Motor Starter Panel |
| 50 | Supplying of 7.5 HP Motor Starter Panel |
| 51 | Supplying of 3 HP Motor Starter Panel |
| 52 | 35 HP VT Motor Pump Shaft |
| 53 | Monoblock Pump Rewinding |
| 54 | Rewinding of electric motor 15 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for Six Month. |
| 55 | Rewinding of electric motor 7.5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for Six Month. |
| 56 | Rewinding of electric motor 3 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for Six Month. |
| 57 | Rewinding of electric motor Upto 1 H.P. upto 0.5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for Six Month. |
| 58 | CABLES AND WIRE |
| 59 | Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 60 | Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 61 | Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 62 | Supplying and erecting flat flexible 3 core 16 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 63 | Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 200A, 415/500V erected on angle iron frame approved make. |
| 64 | Removing submersible pump from Jack well trial testing and Fitting …..Etc complete |
| 65 | Supplying and fitting Nut,Bolt…etc accessories |
| 66 | Supplying and erecting double pole metal /iron clad switch with fuse and neutral link 250V 16A on iron frame/board as per specification No. SW-SWR/MDP |
| 67 | Supplying and erecting double pole metal /iron clad switch with H.C. type fuse and neutral link 250V, 32A on iron frame/board as per specification No. SW SWR/ MDP |
| 68 | Supplying and erecting double pole metal /iron clad switch with fuse 63A 250V on iron frame/ board as per specification No. SW-SWR/MDP |
| 69 | Supplying and erecting Triple pole metal/ iron clad switch and fuse 415/ 500V 100A on angle iron frame as per specification No. SW-SWR/MTP |
| 70 | Supplying Chain Pully Block 3 Ton |
| 71 | Rewinding of 30 HP V.T. Pump (water lubricants) with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for Six Month |
| 72 | Repairing of 30 HP V.T. Pump (water lubricants) pump assembly shaft,bush,bearing etc. testing for the original speed, H.P. and no load consumption & guarantee for Six Month |
| 73 | Repairing of 60 HP Motor Starter Panel |
| 74 | Repairing of 35 HP Motor Starter Panel |
| 75 | Repairing of 15 HP Motor Starter Panel |
| 76 | Repairing of 7.5 HP Motor Starter Panel |
| 77 | Repairing of 3 HP Motor Starter Panel |
| 78 | Supplying Auto Switch Device for 60 HP Submersible pump |
| 79 | Supplying Auto Switch Device for 35 HP Submersible pump |
| 80 | BEARING S K F NBC COMPANY 7317 |
| 81 | BEARING S K F NBC COMPANY 6212 |
| 82 | Repairng of submersible pump of 35 HP with all accessories and testing for the original speed, H.P. and no load consumption & guarantee for Six Month. |
| 83 | Repairng of submersible pump of 60 HP with all accessories and testing for the original speed, H.P. and no load consumption & guarantee for Six Month. |
| 84 | Rewinding/Repairng of Solar Photovoltic Water pump motor of 1 HP with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for Six Month. |
| 85 | Repairing of Solar pump water supply Scheme Starter Panel |
| 86 | Repairing of Solar Panel with complete accessories |
| 87 | Removing Solar Pump from Open well/Bore Well trial testing and Fitting …..Etc complete Please Enable Macros to View BoQ information |