|
| 1 | Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980)for following designation and of following dimensions [ Ref :- UDMA-2018/Page -1 ] [Make :- Subham Pole/Utkarsh/Bajaj or as approved by EIC ]410-SP-1; 7.0 mtrs: 62.00Kg |
| 2 | Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriageof pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly.Upto 9 mtr. [ Ref :- WBPWD-2017/Page- H-1/Item-1 ] |
| 3 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, onsteel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint [ Ref :- WBPWD-2017/H-5/Item-5 ] |
| 4 | Supplying of 100Wt. LED Flood light fittings. (Like Model no- ENDURASUNDOWNSL100WLED765PASYBOTG-Havells/Philips Make) |
| 5 | Distribution wiring for steel light on pole for outdoor fluorescent/SV/MV light fitting with 2x1/1.40 PVC insulated and sheathed cu wire (single core) in 15 mm dia GI Pipe (ISI-Medium), without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI Pipe bracket of lengh 1.05 mts, on pole incl. S&F sutable MS flat clamps with bolts, nuts etc. as required and painting [ Ref :- WBPWD-2017/Page-H-5/Item-H(2) ] |
| 6 | Supply & Delivery 1.1 KV grade 2 core 6 sq.mm. PVC/XLPE insulated Al armoured cable (Make: - Gloster/Mescub/RR Cable/KEI ) |
| 7 | Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, includingfilling the space between the brick & cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [ Ref :- WBPWD-201/Page-F-2/1(a) ] |
| 8 | Supplying & Erection of medium size feeder pillar box of Size Each 9241.00 (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at thefront & back with suitable locking arrangement. The box will bepainted by 2 cores of aluminiam paint over 1 coat of red oxidepaint. Suitable arrangement should be provided for fixing ofTimer unit, fuse unit & other accessories. Leg of the pillar boxwill be 900 mm in length by made up of (35 x 35 x 3 mm MSAngle with suitable base Plate. Legs of the Pillar box will beerected at 300 mm below the ground level with cement concrete(6:3:1). Rest portion coverd by 5\\" Brick Wall with plastering &net cement & bottom portion filled with silver sand as drawing& direction of E.I.C [ Ref :- UDMA-2018/Page-7/Item-39 ] |
| 9 | Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification anddirection of E.I.C. b) For medium size feeder pillar box. [ Ref :- UDMA-2018/Page-7/Item-36 ] |
| 10 | Supplying and fixing 240 V, 40A, DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing FEEDER Pillar Box and necessary connection [ Ref :- WBPWD-2017/Page-D-6/ Item - 7 ] |
| 11 | Excavation of soil for installation of Earth Electrode and filling& ramming --- For Soft Soil [ Ref :- G-1/1(a)] |
| 12 | Earthing with 50mm. dia G.I Pipe 3.64 mm. thick x 3.04Mtr long and 1 x 4 SWG G.I. (Hot Dip) wire (4 Mtr. Long) 13mm. dia x 80mm (long G.I. bolts, double nuts, double washers incl. S & F 15 mm. dia G.I. Pipe protection (1Mtr long) to be fitted with bitumen partly under the ground level & party above ground level driven to an average depth of 3.65Mtr. Below the ground level & restoring surface duly rammed & as below. (a) By ISI Midium G.I. pipe. [ Ref :- WBPWD-2017/G-1/2(a) ] |
| 13 | Connecting the equipments to earth busbar including S & F GI(Hot Dip) wire of size as below on wall/floor with staples buriedinside wall/floor as required and making connection toequipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages --- No. 8 SWG |
| 14 | Painting steel tubular pole including projected arm bracket with one coat of red oxide primer and two coats with silverlac Al.paint etc. (Scraping where necessary).Painting upto7 mtr Polet [ Ref :- UDMA/Page -4/ Item - 10 ] |
| 15 | Supplying,Fitting & Fixing of 15mm to 18mm Thick Marbel Name Plate |
| 16 | WBSEDCL Connection Charges |
| 17 | Labour Cess Please Enable Macros to View BoQ information |
