Tender For Construction Of (1) Amenity Block At North Parking, (2) Toilet Block At Different Locations Such As Near Kedargouri Temple, Near Taranga Club, Near Crafts Pavilion, Drop Off Facility & (3) Ritual Pavilion At Ekamra Kshetra Under Ekamra Con, Bhubaneswar-Odisha

TDR : 54461442

Tender Notice
BOQ

Expired

Bhubaneswar , Odisha

Tender Brief : Tender For Construction Of (1) Amenity Block At North Parking, (2) Toilet Block At Different Locations Such As Near Kedargouri Temple, Near Taranga Club, Near Crafts Pavilion, Drop Off Facility & (3) Ritual Pavilion At Ekamra Kshetra Under Ekamra Con

Document Fees
₹ 11800 /-

EMD
₹ 1452472.0 /-

Tender Value
₹ 14.52 Crore /-

Submission Date
23-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
2	Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
3	Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
4	Providing and applying of Antitermile treatment by drilling 12mm dia holes at adislance of 30cm. @junction of wall and floor about 300mm aprt deep enough to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5 SC OF BAYER MAKE mixed with 475 ltr. waler) pumped these holes to soak the soil @ 1 ltr.solution of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all materials, labour charges, conveyance and all taxes including hiring charges of machinaries as per direction of Engineer-in-charge.
5	Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
6	Plain cement concrete (1:3:6) using 40mm down size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
7	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
8	Raft & Column upto Plinth
9	RCC Wall
10	PLINTH BEAM
11	COLUMN
12	Ground Floor
13	First Floor
14	Second Floor
15	Third Floor
16	Mumty
17	LINTEL BAND & SILL BAND
18	Ground Floor
19	First Floor
20	Second Floor
21	Third Floor
22	STAIRCASE
23	Ground Floor
24	First Floor
25	Second Floor
26	ROOF BEAM
27	Ground Floor
28	First Floor
29	Second Floor
30	Third Floor
31	Mumty
32	Ground Floor
33	First Floor
34	Second Floor
35	Third Floor
36	Mumty
37	CHAJJA
38	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-550D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
39	Ground Floor
40	First Floor
41	Second Floor
42	Third Floor
43	Mumty
44	Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
45	Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
46	Ground Floor
47	First Floor
48	Second Floor
49	Third Floor
50	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge
51	Ground Floor
52	First Floor
53	Second Floor
54	Third Floor
55	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge
56	Ground Floor
57	First Floor
58	Second Floor
59	Third Floor
60	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge
61	Ground Floor
62	First Floor
63	Second Floor
64	Third Floor
65	Third Floor
66	Providing Vitrified tile flooring using vitrified tiles conforming to IS 13755 of 600x600 (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge
67	Ground Floor
68	First Floor
69	Second Floor
70	Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 13755 of (JOHNSON / SOMANY/ KAJARIA/ RAK) or equivalent approved make, colours & shades, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights
71	Ground Floor
72	First Floor
73	Second Floor
74	Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
75	Ground Floor
76	First Floor
77	Second Floor
78	Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
79	Ground Floor
80	First Floor
81	Second Floor
82	Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.(Make: Asian/ Berger or equivalent make duly approved by Engineer-in-Charge)
83	Ground Floor
84	First Floor
85	Second Floor
86	Third Floor
87	Mumty
88	Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.(Make: Asian/ Berger or equivalent make duly approved by Engineer-in-Charge)
89	Ground Floor
90	First Floor
91	Second Floor
92	Third Floor
93	Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.(Make: Asian/ Berger or equivalent make duly approved by Engineer-in-Charge).
94	Ground Floor
95	First Floor
96	Second Floor
97	Third Floor
98	Mumty
99	Painting two coats with approved antifungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.(Make: Asian/ Berger or equivalent make duly approved by Engineer-in-Charge)
100	Ground Floor
101	First Floor
102	Second Floor
103	Third Floor
104	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost in all floor of all labour etc. complete in all respect and as per direction of Engineer in charge in all floor.
105	Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights.
106	Priming one coat with any approved wood primmer including cost of primmer & labour to give an even shade excluding cost of primer in all floor.
107	Painting Two coats with approved Wood Shine Paint of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge
108	Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete and as per direction of Engineer in charge
109	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 65 x 125 mm
110	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 30 mm thick
111	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
112	Providing Decorative small eye Laterite stone masonry in Super structure with cement mortar (1:4) using machine cut laterite stone of approved quality from approved quarry including cost of all material, all taxes and cost of all labour, conveyance, loading & unloading, royalties, hoisting, lowering, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
113	Providing & laying of 80mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mmthick compacted bed of coarse sand ,filling the joints with fine sand etc.all compelte including cost,conveyance,royalty,taxes of all materials,labour,T & P etc.Complete and as per direction of Engineer in charge.
114	Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colourand size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758: 1984 and as per direction of Engineer in charge.
115	Providing and fixing stainless steel ( Grade 304) of SHS/RHS, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
116	Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Conforming to IS: 3548 & IS: 16231(FENESTA/NCL VEKA LTD)
117	Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 6mm thick Black glass panes & Fly proof Mesh. Glass: Saint Gobain, AIS
118	Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
119	Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (85mm & above). ).Including 12 mm Toughened Glass.(FENESTA/NCL VEKA LTD)
120	Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Conforming to IS: 3548 & IS: 16231(FENESTA/NCL VEKA LTD)
121	Using R1 series with frame (33mm & above ) x (35mm & above).
122	Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge.
123	Toilet Block & Amenity block First Floor
124	Amenity block Third Floor
125	Amenity block Mumty
126	Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
127	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
128	For vertical surface two coats @ 0.70 kg per sqm per coat
129	For horizontal surface one coat @1.10 kg per sqm.
130	Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
131	Serrated with central bulb (225 mm wide, 8-11 mm thick)
132	Supply & Installation of LED base Glow Sign Board as per below specification (in both English & Odiya Letters) Total board size:19 × 3 ft (Odiya) & 22 × 3 ft (English) ACP Sheet:Aluminium based cover panel sheet (ACP) for letter fixing on the sign board (Silver Metallic colour).Aluminium:2.5\\" × 1.5\\" hollow square pipe framed cover with aluminium based cover panel sheet. Plastics Sheet:3 mm plastic sheet (White in colour) in Odiya & English letters.L.E.D:0.3 to 1.5 Watts (White colour)Power Supply:SMPS (Switched Mode Power Supply), RPS (Regulated Power Supply)Input Voltage: 160 to 230 A.C.Output Voltage: 12/24 Volts D.C.Silicon Paste:Paste for ACP sheet.M.S. Angles:S/F of M.S. angle with setting, bending & welding work for structural work.Size of M.S. angle:40 × 40 × 4 mm,30 × 30 × 5 mm,25 × 25 × 5 mm.For supporting of LED sign board, G.I. nut bolt, painting in black complete and as per direction of Engineer in charge.
133	Manufacturing, Providing and installing of GFRC (Glass Fiber Reinforced Concrete) Screens in pattern, design and colour of approved make to be fixed in between RCC/Brick work column or structural work with dry fixing method with appropriate framework, using fasteners and necessary hardware etc. in building façade.It shall be made from 53 grades white Portland cement, quartz fine silica sand, alkali resistant glass fibre, super plasticizers and UV resistant synthetic inorganic pigments.The rate includes the cost of 25 mm thick GFRC element, frame and anchor fasteners, labour charges for fixing, required scaffolding, working at all levels/heights and leads, including all costs of material, labour, etc. Complete and as per direction of Engineer in charge.
134	Providing and fixing modified clay material – MCM CusStone-1200 × 600 mm, thickness 2.5 mm to 3 mm PHOMI make, as per company standard dimension, pattern, colour as specified, manufactured through infrared patented complete and as per direction of Engineer in charge.
135	Stone work (machine cut edges) for wall lining etc. (veneer work) , backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete and as per direction of Engineer in charge.
136	Laterite Stone 75 mm thick- Exposed face machine cut and table rubbed with rough backing.
137	Laterite Stone Masonry incement mortar (1:6) in foundation and plinth. Including cost conveyance royalty of all materials, labour T&P required for the work etc. complete as per direction of the Engineer- in-charge
138	Providing and laying 150 mm thick khandolite flat block packing in flooring in required design and patterns, in linear as well as curvilinear portions all complete as per drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete (excluding khondalite) as specified and as directed by the Engineering-Charge.
139	Loosening,levelling and compacting original ground supporting embankement to faciliate placement of first layer of embankement,scarified to a depth of 150 mm,mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & clause-305 of MOSRT&H Specifications for Road & Bridge works(5th. Revision)
140	Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
141	Khandolitc stone Masonry work in Super Structure in cement mortar (1:4) (1 Cement : 4 Course Sand) including cost of all materials, labour T &P etc required for the work all complete as per direction of Enginecr-inCharge).
142	Khandolite Stone cladding of 75 mm thick on exposed face and edge machine cut and table rubbed with rough backing for wall lining etc.12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing, polishing etc. complete (excluding cost of khondalite) as per specification and direction of Engineer in Charge.
143	Khandolite Stone Ornamental cladding of 75 mm thick on exposed face and edge machine cut and table rubbed with rough backing for wall lining etc.12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing, polishing etc. complete (excluding cost of khondalite) as per specification and direction of Engineer in Charge.
144	Providing and fixing cast iron railing plus alloys as per approved design including preparation of design pattern, casting, shot blasting, polishing the casting, painting with two coats of poly urethane coating of approved RAL number over one coat of zine chromate primer, ransportation to site, welding of cast Iron railing using MIG welding at site, erection at site with neessary core cutting and non-shrink grouting with GP2 and making final touch up with paint wherever required all complete as per the direction of Engineer-in-charge.
145	Supplying and laying precast U drain of internal size (1000x1000) WITH LID COVER: following details as per direction of Engineer in chargeInternal dimensions: 1000 X 1000 X 2000 MMGrade of concrete: M 50Fe 500 CRS steelLoad carrying capacity: 5T Wheel Load (T25)Raft thickness (e) = 110 mmWall thickness at top (c) = 85 mmWall thickness at bottom (d) = 110 mm
146	Directional Free Standing Signage (Specification to be followed from Cl. 4.1 of BDA guideline Notification No. 15689 dtd. 22.09.2020 for heritage signage): The signage structure is a combination of wrought/cast iron pipe structure with sandstone base and caping. Stainless Steel Panel flags (minimum 4 nos of panel printed both sides) with symbol and text digitally H1625-RS printed on micro prismatic retro reflective boards conforming to type XI DG3 (diamond grade) 4000 series. Total height : 4000 mm Text language: Odia and English. Text height: Odia 80-85 mm; English 75-80 mm, Icon height 200-220 mm as per drawings & direction of Engineer in Charge.
147	Directional Wall mounted Signage (Specification to be followed from Cl. 4.2 of BDA guideline Notification No. 15689 dtd. 22.09.2020 for heritage signage): Mild steel panels (with/without wrought iron frame) screwed directly on wall. Text printed digitally H1625-RS printed on micro prismatic retro reflective boards (bothside) conforming to type XI DG3 (diamond grade) 4000 series. Text language: Odia and English. Text height: Odia 70-75 mm English 65-70 mm . Icon height: 150-170 mm as per drawings & direction of Engineer in charge.
148	Wayfinding signage(Specification to be followed from Cl. 4.3 of BDA guideline Notification No. 15689 dtd. 22.09.2020 for heritage signage): Mild steel panels (with/without wrought iron frame) screwed directly on wall. Text printed digitally H1625 -RS printed on micro prismatic retro reflective boards conforming to type XI DG3 (diamond grade) 4000 series. Text language: Odia and English. Text height: Odia 40-45 mm English 40 - 45 mm Century 30 -35 mm. Icon height: 155 -175 mm as per drawings & direction of Engineer in charge.
149	Location signage (Specification to be followed from Cl. 4.4 of BDA guideline Notification No. 15689 dtd. 22.09.2020 for heritage signage): The signage structure is a combination of wrought/cast iron pipe structure with sandstone base and iron brackets. Stainless Steel Panel flags with symbol and text digitally H1625-RS printed on micro prismatic retro reflective boards conforming to type XI DG3 (diamond grade) 4000 series. Text language: Odia and English. Text height: Odia 55-60 mm; English 55-60 mm as per drawings & direction of Engineer in Charge.
150	Facility Signage(Specification to be followed from Cl. 4.8 of BDA guideline Notification No. 15689 dtd. 22.09.2020 for heritage signage): Digitally H1625-RS printed on micro prismatic retro reflective boards conforming to type XI DG3 (diamond grade) 4000 series, Panel size: 450 mm x 450 mm, Icon height: 150-250 mm, Text height: 60-65 mm, In order to give direction to a particular facility, the direction arrow should be added below the icon along with information on walking distance etc. complete as per drawing and direction of Engineer in charge.
151	Supplying and fixing of 1 set (4 Nos. of 120 Litre of different colour Plastic Wheel Dustbin, WB120L) chain linked connection with each other and standing on pedestal including foundation, labour, transportation, installation, tnp etc. complete
152	HORTICULTURE
153	Supplying and stacking of good earth at site including royalty and carriage up to 5 km as per specification and direction of Engineer-in-Charge.
154	Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).(2:1)
155	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .
156	Screened through sieve of I.S designation 20 mm
157	Screened through sieve of I.S designation 16 mm
158	Screened through sieve of I.S designation 4.75 mm
159	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
160	Amenity ,Boundary,Hardscape & Allied Works
161	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge(2:1)
162	Providing and laying Corian Grass /Jayasia Japanica/Selection No.-1/Neelgiri Grass Turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmous) and then rolling the surface with light roller make that surface smoothen and light watering with sprinkler and maintenance for 30days or more till the grasses establish properly, as per direction of officer-in-charge etc. All compete.
163	Providing and stacking of Ipomoea purpurea (Morning glory) of height 30 cm to 45 cm. in 20 cm size of Earthen pot/ Plastic pot as per direction of the officer-in-charge
164	Amenity ,Boundary,Hardscape & Allied Works
165	Providing and stacking of Jasmine humile (Yellow) of height 30 cm to 45 cm. in 20 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge.
166	Providing and stacking Duranta Golden, having ht.12 cm to 15 cm bushy shape with fresh and healthy leaves in Poly Bag and as per direction of the officer-in-charge
167	Providing, stacking and Displaying Syzygium myritifolium (Eugenia oleina) having 45 cm to 60 cm height, well developed with fresh, healthy & shining foliage in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
168	Providing, stacking and Displaying Ixora singaporensis different colour having 30 cm and above ht., well developed with fresh & healthy foliage with bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
169	Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm. in bushy in big size HDPE bag as per direction of the officer-in-charge.
170	Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm in 20 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge.
171	Providing and stacking Tradescantia zebrina having in 15 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.
172	Providing, stacking and Displaying Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in 20 c.m Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.
173	Providing,stacking and Displaying Adenium Obesum grafted well developed with fresh and healthy 4 to 5 barnch 60 cm to 75 cm ht. plant in 40 cm size Challi / Plastic Pot and as per direction of the officer-in-charge.
174	Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge.
175	Providing and stacking of Ficus benjamina (green) of height 150-165 cm.bushy with helathy branches and lush green foliage in big sizeHDPE bag as per direction of the officer-in-charge.
176	Providing, stacking and Displaying Acalypha twisted well developed with fresh & healthy 30 cm & above ht. plant in 20 cm size Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge
177	Providing, stacking and Displaying Dracaena Fragrans”Massangeana’’ having ht. 30 cm & above with full of leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot and as per direction of the officer-in-charge.
178	Providing and stacking of Plumeria alba dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bag as per direction of the officer-in- charge.
179	ELECTRICAL ITEMSFITTINGS & FIXTURES
180	Supply, installation, testing and commissioning of BIS certified surface mounted exterior-rated LED linear Wall washer luminaire (1000-1200)mm with housing color designed for wall washing and grazing architectural lighting applications having extruded aluminum housing with die-cast aluminum end-caps with supply of 150W 24V IP67 Driver as per design requirement and approval drawings.
181	Supply, installation, testing and commissioning of 4 Mtr Height grooved mild Steel tube with cast iron embblellisments decorative pole (equivalent to Homdec Make -HL-ND-ILBP2790)fitted with Cast Aluminium Lighting Fixtures with Arcylic diffuser, Stainless Steel difuser strips, Coating system sanding & shot blasting Pre-Teatment, Epoxy Primer, Top Coating in U V Ray Resisatant / Polyster COating PCD 175, Including Diffuser lamp LED Wattage - 36 W. with coil earthing and Junction box for cable termination (loop in loop out) including foundation as per design requirement and approval drawings.
182	Supply, installation, testing and commissioning of 3.5 Mtr Height heavy GI pole of 65 mm dia with MS base plate of 250 X250 X12 mm thick, 16 mm dia 550 mm long foundation bolts, with supply of Sintex distribution box with 6 Amp MCB, Channel, Back cover with screws including supply of cast aluminium lighting fixture with acrylic diffuser, stainless steel, difuser strip, coating system sanding and shot blasting, pre treatment, epoxy primer, top coat in UV ResistantP.U/Polyster coating suitable for retrofit LED lamp equivalent to Catlogue No. HL-ND-ILPB2790, LED Wattage 30 Watt (Retrofit LED Lamp) with coil earthing and Junction box for cable termination (loop in loop out) as per design requirement and approval drawings.
183	Supply, installation, testing and commissioning of 6 Mtr Height grooved mild Steel tube with cast iron embblellisments decorative pole fitted ( Homdec-HL-ND-ILBP2750) with Cast Aluminium Lighting Fixtures with Arcylic diffuser, Stainless Steel difuser strips, Coating system sanding & sho blasting Pre-Teatment, Epoxy Primer, Top Coating in U Ray Resisatant / Polyster Coating PCD 175, Including Diffuser lamp LED Wattage - 2*30 W. with coil earthing and Junction box for cable termination (loop in loop out) including foundation as per design requirement and approval drawings.
184	Supply, installation, testing and commissioning of LED (8-10)w Spike Light Fixture with Body made of PDC Aluminium housing and Toughened Glass Front Cover with Secondary PMMA Diffuser for Optimum Light Distribution. System Efficacy >80lpw.Ingress Protection of IP66 as per design requirement and approval drawings.
185	Supply, installation, testing and commissioning Of Post top Light Cast Aluminium Lighting Fixtures, SS Glass Strips, Stainless Steel Screws, Corrosion and UV Ray Resistant Coating, Acrylic Diffuser. LED Wattage-24 Wt HL-2750(2) including foundation as per design requirement and approval drawings.
186	Supply, installation, testing and commissioning of 975 mm High Bollard, Cast Aluminium lighting fixture, Stainless steel screws, Acrylic / Polycarbonate Diffuser, Corrosion & U.V RAY Resistant coating. LED Wattage - 14 Wt HL-2804 including foundation as per design requirement and approval drawings.
187	(i) Supply, installation, testing and commissioning of Outdoor Architectural IP67 LED Neon Flex Strip. Luminaire should be flexible 24V DC LED Strip based luminaire with Spotless & Uniform diffused illumination. System wattage should not exceed 10W/Mtr. with System efficacy not less than 60LPW. (±5%) (ii) supply of 150 W 24V IP67 Driver as per design requirement and approval drawings. (iii) supply of Aluminium profile with adjustable mounting bracket for Neon 1615 - 1 meter As per design requirement and approval drawings.
188	FEEDER PILLARS
189	Supply, installation, testing and commissioning of outdoor type feeder pillar (Double door type IP 65) of suitable size not less than 30 cm and up to 45 cm deep made out of 16 SWG thick steel sheet duly compartmentalised having 4 strip busbar of 100 amp capacity, double door with spring loaded allen key type locking arrangement for inner compartment and seperate coupboard type concealed locking arrangement for outer door. (Panel will have separate compartment for electric supply co.) duly rain and dust protected. The panel shall be fixed on M S angle iron frame work of size 50mmX50mmX6mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement, 2 sand and 4 stone aggrigate 20 cm) and having following accessories mounted inside the cubicle panel i/c connections, inter connections, earth studs, painting etc. as reqd.EXTERNAL FEEDER PILLAR: 415 V, 40 Amps, 4P, MCCB : 1 Nos.: 415 V, 100 Amps TP + N + E Al. Busbar (25 KA): 1 set: Voltmeter 0-500 Volt 96 sqmm flush type with selector switch : 1 Each: Ammeter, 96 sqmm flush type with selector switch & 40/ 5 Amp CTs : 1 Set: Indicating lamps (RYB) with control MCB. : 1 Set: 25 Amp. 4 pole, 10 KA, 415V, 50 Hz MCB : 03 Nos.: Power contractor 4 pole, 40 Amp., 415V, 50 Hz. :01 Nos.: Contact multiplier : 6A, NO/NC as required : 2 No: Selector / Test switches as required in control circuitSurge arrestor : B/C type : Danger notice plate.Note: The contactors shall be controlled by a Time switch / Digital with adjustable time of switching 'ON' and 'Off' the lamps throughout the year; mounted inside the Feeder pillar.
190	L T CABLE SYSTEM
191	Supply of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at Surface, in Existing Pipes, Loose in Trench, Direct Buried in Ground in a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(MAKE: KEI/HAVELLS/POLYCAB/GLOSTER)
192	: 10 sq mm 4 core PVC Armoured cables ISI marked
193	: 16 sq mm 4 core PVC Armoured cables ISI marked
194	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
195	Upto 35 sq. mm (Inside the 63mm dia HDPE Pipe)
196	Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
197	4 x 16 sq.mm
198	4 x 10 sq.mm
199	PIPES
200	Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2100 mm dia
201	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
202	63 mm dia
203	EARTHING SYSTEM
204	Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
205	Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
206	LIGHTENNG PROTECTION for Market building complex
207	Supply of Australian make PP-Stormking ESE-60 Early Streamer Emission type Advanced ESE terminal. It should be made up of SS 316L material and works on dual trust design. ESE terminal should comprised of separate electrically isolated dual SS 316L panels surrounding an SS Central Finial. ESE terminal should anticipate advanced triggering of min. 60 µs. ESE terminal central finial should be made from solid SS rod and its length should be min. 85mm above surrounding panels. ESE terminal SS 316L is low carbon steel which exhibit better corrosion resistance and are stronger at elevated temperatures performance. For isolation of terminal Delrin Adapter should be provided at bottom of terminal which should give higher dielectric strength. ESE terminal should be tested in European accredited test laboratory after 2011 as per revised NFC 17-102:2011 standard. Terminal should be tested for impulse current withstand test in CPRI for 40 kA. Terminal should be non electronic and does not require any external power supply.Model: ESE-60 SS terminal.
208	Supporting Mast SS: The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 5 mtr. above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2 mtr but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non corrosive and made up of medium class SS pipe of 2\\" dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non-corrosive and made up of SS. Model: Supporting Guyed Mast: 5 mtr. x 2\\" dia with base plate, guying kit and mounting accessories
209	Supply of 70sq.mm cross section down conductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr. Model: Single core flexible Cu. Cable 70Sq.mm with SS saddles.
210	MODEL-MES CBR -17.2X3
211	Supply of 250Micron Copper Bonded Earth Rod 3Mtr long ×17.2 mm dia. CPRI Certified made up of high tensile low carbon steel with copper bonding of 99.9% electrolytic copper. Electrode should be tested in CPRI for 25KA short circuit current. Both the ends of electrode should be threaded and suitable for threaded Ground Rod Clamp .Ground rod clamp should be made up of brass. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)
212	Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading. Model: LSR.
213	Supply and installation of UPVC Earthling Chamber with cover and pouring of chemicals with earthing pipes into the hole of recommended size as per IE rule and directionof Engineer in charge.
214	Installation charges Installation cost of total lightning protection system * Mounting Lightning terminal on the Mast. * Fixing the Mast on the top of roof. * Lying the down conductor from the terminal to earth point. * Clipping of cable in the building wall. * Making 2 Nos. of 10 ft. earth installation. * Pouring of Chemicals with Earthing pipe into the hole. * Lying of cable to connect the earth pit.
215	WIRING
216	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor sIngle core cable in surface /recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
217	Group A
218	Group B
219	Group C
220	Subsequent point of group control
221	CIRCUIT & SUB-MAIN CABLE
222	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
223	2X1.5Sq.mm + 1 X1.5 Sqmm. earth wire
224	2X2.5Sq.mm + 1 X2.5 Sqmm. earth wire
225	2X4Sq.mm + 1 X4 Sqmm. earth wire
226	4X10Sq.mm + 2 X6 Sqmm. earth wire
227	4X4Sq.mm + 2 X4 Sqmm. earth wire
228	Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
229	5A/6A SWITCH
230	15/16A switch
231	3pin 5/6A socket
232	6pin 15/16A socket
233	Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.
234	2 Module
235	3 Module
236	4 Module
237	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.
238	4 way (4 + 12), Double door
239	Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required
240	40A TPN (mcb)
241	Supplying and fixing 5A to 32A RATING ,240/415V ,10KA,\\"C\\" CURVE,MCB suitable for inductive load of following poles in the existing MCB DB complete with- connections,testing and commissioning etc. as required.
242	Single pole (16A)
243	single pole (10A)
244	Supply, installation, testing & commissioning of wall mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42/55 protection with hinged and lockabale doors. CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V. 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below: All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T, Digital Voltmeter, Digital Ammeter and control fuse etc. complete. (Panel)
245	100A MCCB (incoming 4 Pole)
246	40A TPN (outgoing)
247	Multifunction Meter
248	100A/5A CT
249	Rotary operated handle
250	Spreader link
251	Space for enegy meter 3 phase .. As per TPCODL aprroval
252	Supply of Panel ,transportation, Installation
253	Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V. 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below: All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T, Digital Voltmeter, Digital Ammeter and control fuse etc. complete.(Panel)
254	A. Main Distribution Panel-1nos
255	ATS 250 A 4 P (Incomer)
256	125 TPN MCCB (Outgoing)
257	40A TPN MCB (Outgoing)
258	32A TPN MCB (Outgoing)
259	63A TPN MCB (Outgoing)
260	Indicator R,Y B RGA
261	ON/OFF Trip indication microswitch with lamp
262	Digital multifunction meter,CL-1
263	250/5A Metering CT
264	Spreader Link
265	Rotary Operating Handle
266	Aux cum Trip Alarm
267	Providing and fixing HT danger notice plate of (250 mm X 200 mm.) made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides and with inscuption in single red colour on front side as required.
268	Al. EC Busbar (25mm×06mm) 4 nos (R,Y,B,&N)
269	Space for 3phase energy meter as per TPCODL approved
270	Panel board with all accessories complete with factory wiring
271	B.Sub Distribution panel (GROUND FLOOR) -01nos
272	125A,36KA(Incomer) MCCB
273	32A TPN MCB (Outgoing)
274	63A TPN MCB (Outgoing)
275	16A SPN (Outgoing)
276	Indicator R,Y B RGA
277	3-phase class 0.5 Digital Voltmeter
278	Al. EC Busbars (25mm×06mm)
279	Panel board with all accessories.
280	C.Sub Distribution Panel (1ST & 2ND FLOOR ) -02nos
281	125A,36KA MCCB (Incomer)
282	63A T&PN MCB (Outgoing)
283	16A SPN (Outgoing)
284	32A TPN MCB (Outgoing)
285	Indicator R,Y B RGA
286	3-phase class 0.5 Digital Voltmeter
287	Al. EC Busbars (25mm×06mm)
288	Panel board with all accessories.
289	10A SPN (Outgoing) only for 2nd floor for terrace light
290	DISTRIBUTION BOX
291	GROUND FLOOR ( TOILET LEFT SIDE & COUNTER )
292	63A TPN MCB (INCOMER)
293	10A SP MCB
294	16A SP MCB
295	GROUND FLOOR ( TOILET RIGHT SIDE & COUNTER)
296	63A TPN MCB (INCOMER)
297	10A SP MCB
298	16A SP MCB
299	KITCHEN
300	63A TPN RCCB
301	16A SP MCB
302	10A SP MCB
303	CAFETERIA
304	63A TPN MCB (INCOMER)
305	16A SP MCB
306	25A SPN MCB
307	10A SP MCB
308	1ST FLOOR (TOILET LEFT SIDE)
309	10A SP MCB
310	25A SPN MCB (INCOMER)
311	16A SP MCB
312	1ST FLOOR (TOILET RIGHT SIDE)
313	10A SP MCB
314	25A SPN MCB (INCOMER)
315	16A SP MCB
316	1ST FLOOR DORMITORY -1
317	63A RCCB TPN (INCOMER)
318	16A SP MCB
319	10A SP MCB
320	1ST FLOOR DORMITORY -2
321	63A RCCB TPN (INCOMER)
322	16A SP MCB
323	10A SP MCB
324	2nd FLOOR (TOILET LEFT SIDE)
325	10A SP MCB
326	25A SPN MCB (INCOMER)
327	16A SP MCB
328	2nd FLOOR (TOILET RIGHT SIDE)
329	10A SP MCB
330	25A SPN MCB (INCOMER)
331	16A SP MCB
332	2nd FLOOR DORMITORY -1
333	63A RCCB TPN (INCOMER)
334	16A SP MCB
335	10A SP MCB
336	2nd FLOOR DORMITORY -2
337	63A RCCB TPN (INCOMER)
338	16A SP MCB
339	10A SP MCB
340	Supplying and fixing following way, horizontal type three pole andneutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar, interconnections, powder painted including earthing etc. asrequired. (But without MCB/RCCB/Isolator)
341	4 way (4 + 12), Double door
342	6 way (4 + 18), Double door
343	8 way (4 + 24), Double door
344	FITTING AND FIXTURE
345	Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers,temperature rise=75 °C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and
346	1050mm
347	1200mm
348	1400mm
349	Modualr Steped type fan regulator
350	Exhaust fan (225mm Aeroclean plus LD GBD)
351	LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS: 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection THD <10%, P. F.20.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K/4000°K /5700°K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC nsulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2105 <120 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
352	18Watt
353	30watt
354	LED Batten light (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI ≥80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness ≥
355	18-22Watt
356	36watt
357	LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) COB Type of following body material and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI>80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K/5700°K/6000°K/6500°K (As per ANSI Bin), SDCM
358	8-10watt
359	18-22 watt
360	30 watt
361	Mirrior Light
362	LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000- 4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained
363	70 watt LED Flood Light
364	Supplying and fixing PVC batten/ angle holder including connections etc. as required. (PVC Batten/ Angle Holder)
365	supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
366	4CX16sqmm
367	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
368	4CX16sqmm
369	CABLE AND CABLE TRAY
370	Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE/PVC insulated multistrand Al. / Cu. Conductor armoured / unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe. on provided cable trays / ladders etc. as, required complete with clamps, hardware for fixing tagging, identification etc.
371	3 1/2c×120 sq mm AI A2XFY Armoured Cable(including spare)
372	3 1/2×50 sq mm A2XFY AI Armoured Cable (including spare)
373	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
374	3½ X 120 sq. mm (45mm)
375	3½ X 50 sq. mm (35mm)
376	Supplying and installing following size of perforated painted with powder coating M S cable trays with perforation not more than 17.5% in convenient sections,joined with connectors,suspended from the ceiling with M S suspenders including bolts & nuts,painting suspenders etc as required.
377	100mm width ×50mm depth×1.6 mm thickness
378	375mm width ×50mm depth×2.0 mm thickness
379	Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part- III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipmentand accessories complete as required:- (i) Speed-1.5MPS
380	16 passenger's Lift
381	Desingn Supply, installation, testing and commissioning of VRF/VRV system including indoor / outdoor units, piping, electrical power disstribution, wiring, electrical panel, treated fresh air system etc. for aminity block ekamra all complete (Gr,1st 2nd floor)
382	DISEL GENERATOR (DG)
383	Supplying installation, testing and commissioning of silent type DG sets, AMF panel, bus ducting/ cables from DG sets to essential panel, synchronizing panel where required, DG set enclosure room sound insulation/ventilation/smoke exhaust as required, earthing of DG set system, control cabling, fuel tank/piping, DG set exhaust piping/ exhaust chimney as per CPCB norms, civil works connected with DG sets including foundation as required
384	UNINTERRUPTED POWER SUPPLY (UPS)
385	Supplying, installation, testing and commissioning of online 3 phase UPS system with 60 minutes back up including batteries, interconnecting cables, battery racks etc.
386	EARTHING
387	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required.
388	Charcole
389	25mm×05mm flat
390	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required.
391	Charcole
392	Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/termination with Gl thimble etc. as required.
393	Supply and installation of rubber mats 12mm thick of size 2000mm×1000m×12mm thick electrical tested with test certificate.
394	Medicine with three years expiry date to be fixied in electrical control panel.
395	Supply and fixing of CO2 fire extingusisher with mounting clamps with pressure test certificate.
396	Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for electrical fire protection as per standards of electrical inspectorate.
397	LIGHTENNG PROTECTION
398	Supply of Australian make PP-Stormking ESE-60 Early Streamer Emission type Advanced ESE terminal. It should be made up of SS 316L material and works on dual trust design. ESE terminal should comprised of separate electrically isolated dual SS 316L panels surrounding an SS Central Finial. ESE terminal should anticipate advanced triggering of min. 60 µs. ESE terminal central finial should be made from solid SS rod and its length should be min. 85mm above surrounding panels. ESE terminal SS 316L is low carbon steel which exhibit better corrosion resistance and are stronger at elevated temperatures performance. For isolation of terminal Delrin Adapter should be provided at bottom of terminal which should give higher dielectric strength. ESE terminal should be tested in European accredited test laboratory after 2011 as per revised NFC 17-102:2011 standard. Terminal should be tested for impulse current withstand test in CPRI for 40 kA. Terminal should be non electronic and does not require any external power supply.
399	Model: ESE-60 SS terminal.
400	Supporting Mast SS: The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 5 mtr. above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2 mtr but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non corrosive and made up of medium class SS pipe of 2\\" dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non-corrosive and made up of SS. Model: Supporting Guyed Mast: 5 mtr. x 2\\" dia with base plate, guying kit and mounting accessories
401	Supply of 70sq.mm cross section down conductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr. Model: Single core flexible Cu. Cable 70Sq.mm with SS saddles.
402	MODEL-MES CBR -17.2X3
403	Supply of 250Micron Copper Bonded Earth Rod 3Mtr long ×17.2 mm dia. CPRI Certified made up of high tensile low carbon steel with copper bonding of 99.9% electrolytic copper. Electrode should be tested in CPRI for 25KA short circuit current. Both the ends of electrode should be threaded and suitable for threaded Ground Rod Clamp .Ground rod clamp should be made up of brass. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)
404	Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading. Model: LSR.
405	Supply and installation of UPVC Earthling Chamber with cover
406	Installation charges Installation cost of total lightning protection system * Mounting Lightning terminal on the Mast. * Fixing the Mast on the top of roof. * Lying the down conductor from the terminal to earth point. * Clipping of cable in the building wall. * Making 2 Nos. of 10 ft. earth installation. * Pouring of Chemicals with Earthing pipe into the hole. * Lying of cable to connect the earth pit.
407	CCTV SYSTEMS
408	Supply, installation, testing & commissioning of 4 MP IP Dome Camera. Image Sensor 1/3\\"CMOS, Fixed focal lens, IR Distance 30m, Video Compression S+265/H.265/H.264B/H.264M/H.264H, Audio Compression G.711A/G.711U, Image PAL:25fps(1920×1080, 1280×720, 704×576, 640×480), 3D DNR Yes, 1*RJ-45,10/100 Mbps self-adaptive Ethernet port, POE 802.3af,MAX 6W.
409	Supply, installation, testing & commissioning of 4 MP IP Bullet Camera. Image Sensor 1/3\\"CMOS, Fixed focal lens, IR Distance 30m, Video Compression S+265/H.265/H.264B/H.264M/H.264H, Audio Compression G.711A/G.711U, Image PAL:25fps(1920×1080, 1280×720, 704×576, 640×480), 3D DNR Yes, 1*RJ-45,10/100 Mbps self-adaptive Ethernet port, POE 802.3af,MAX 6W.
410	Supply, installation, testing & commissioning of 32 Ch. NVR 1 Sata. S+265/H.265/H.264 video formats, Connectable to the third-party network cameras, 1×HDMI and 1×VGA simultaneous outputs, 4 SATA interface, up to 8TB or higher, 1×RJ45 self-adaptive 10/100/1000 Mbps network interface.
411	Supplying, Installation, Testing and Commissioning of following 42\\" size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.
412	Supply, Installation, Testing & Commissioning of Central Control Station consisting of the following accessories, PC i7 Intel Processor, 2.93 Ghtz or better, 8GB RAM (Expandable), 1TB HDD, 2GB NVIDIA graphic card, CD/DVD R/RW Drive & 32\\" inch TFT colour monitor, laser printer, cordless key board, mouse, Windows 10 operating system, etc. all complete
413	SITC of - 24 Port Network Switch.Network Switch shall be PoE 1G network switch having support for protocols such as ARP, DHCP, RSTP etc, & provide cybersecurity features to attain network security & reliability, having upto 4 SFP port for fibre connectivity with all necessary accessories such as network rack, patch panels, patch chords etc. as per requirement.
414	Supply, Laying, Testing & Commissioning of following Signal & communication cable, CAT 6A FRLS Cable.
415	Supply, installation, testing & commissioning of Cat 6A 24-port loaded Jack Panel / PATCH PANEL
416	Supply, installation, testing & commissioning of PATCH CORD SWITCH END FOR CAMERA 1 MTR
417	Supply, installation, testing & commissioning of PATCH CORD CAMERA END 2MTR
418	Supply, installation, testing & commissioning of 32U loaded Rack
419	Accessories such as including clips, mounts, tags, required camera brackets etc. complete as per direction of Engineer in charge
420	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )
421	15 mm CPVC SDR 11 pipes
422	20 mm CPVC SDR 11 pipes
423	25 mm CPVC SDR 11 pipes
424	32 mm CPVC SDR 11 pipes
425	Providing all materials, labour, T&P for laying/ fixing of following dia UPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size UPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. as per specification and direction of Engineer-in-charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ).
426	25 mm UPVC sch 80 pipes
427	32 mm UPVC sch 80 pipes
428	40 mm UPVC sch 80 pipes
429	50 mm UPVC sch 80 pipes
430	Providing all materials, labour, T&P for laying/fixing of following dia UPVC pipes as per IS-4985 with ISI mark including fixing of required size UPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure etc. as per specification and direction of Engineer-in-charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ).
431	50mmP.V.C.S.W.R.Pipe 6kg/cm2
432	Supplying all labour T & P for Cutting grooves through the wall or floor for taking PVC pipes and mending good the damages etc.all complete.
433	Wall & floor cutting
434	Supplying all labour T & P for Cutting holes through the brick or laterite, masonarry wall for taking sand cast iron (SCI) pipes or A.C pipes and manding good the damages etc.all complete.
435	For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
436	For 75mm to 150mm dia pipe to pass in 250mm thick wall
437	Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge.
438	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )Rain Water Pipe .
439	110mm U.P.V.C.S.W.R.Pipe 6kg/cm2 .
440	110mm U.P.V.C.S.W.R. Door bend
441	110mm U.P.V.C.S.W.R.45 degree bend
442	110mm U.P.V.C.S.W.R. plain bend
443	110mm U.P.V.C.S.W.R. Door Tee
444	110mm U. P.V.C. Clip/Clamp
445	110 mm U. P.V.C.S.W.R. cowl
446	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches , Sewer ,waste water &stack line pipe from bathroom & toilet etc. as per specification and direction of Engineer-in-charge. .(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )
447	110mm U.P.V.C.S.W.R.Pipe 6kg/cm2
448	75mm U.P.V.C.S.W.R.Pipe 6kg/cm2
449	110mm U.P.V.C.S.W.R. plain bend
450	110mm U.P.V.C.S.W.R. Door bend
451	110mm U.P.V.C.S.W.R. DoorTee
452	110mm U.P.V.C.S.W.R. plain Y Tee
453	110mm U.P.V.C.S.W.R. coupler
454	110mm U.P.V.C.S.W.R.45 degree bend
455	110mm U.P.V.C.S.W.R. P -trap
456	110mm U. P.V.C. Clip/Clamp
457	110mm U.P.V.C.S.W.R. Off set bend
458	110mm U.P.V.C.S.W.R. plain Tee
459	110mm U.P.V.C.S.W.R. cowel
460	110mmx 75mmx25mm U. P.V.C.S.W.R. Multi -trap
461	110x75mm U.P.V.C.S.W.R. reducer socket
462	110mm U.P.V.C.S.W.R. Door Y Tee
463	75mm U.P.V.C.S.W.R. plain bend
464	75mm U.P.V.C.S.W.R.45 degree bend
465	75mm U.P.V.C.S.W.R. plain Y Tee
466	Supplying, fitting and fixing of following types CP other fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
467	15mm dia C P brass 2 Way bib cock with wall flange
468	15 mm CP brass Angular Stop Cock
469	Hand shower (Health Faucet) with 8mm dia 1.00 mtr long flexible Tube & wall hook with NRV.
470	15mm dia C.P. brass Piller cock Auto Closing System
471	Auto Closing Concealed Urinal Flush Valve With wall Flange.
472	C P.Robe Hook
473	Waste Coupling 32mm size Full Thread with 130mm height.
474	Soap Dish (Polycarbonate)
475	Toilet Paper Roll Holder with Shelf.
476	Pillar Cock with Extended Lever Handle ,For PH Toilet.
477	Soap Dispenser,0.8L Capacity,ABS finish White/Smoked
478	C P Bottle TRAP 32 mm size with 250mm& 190mm Long wall Connection Pipes &Wall Flange.
479	15mm dia Bib cock with wall flange
480	20mm Concealed Stop cock with wall flange
481	15mmCP brass Bathtub Spout with wall flange
482	20mmx600mm C P brass towel rail
483	Sink Cock with Regular Swinging Spout( Wall mounted Model) with wall flange for Kitchen sink.
484	Over Head Shower of 120mm round shape single flow(Face Plate Stainless Steel & ABS bodyin chrome finish) with rubit cleaning system &Shower Arm 190mm Long with flange(Jaquar ) Cat No.OHS -1663&SHA-4839(1525/-+1100/-)
485	Paper Towel Dispenser Capacity:-400-600C/Z towels,Material:AISI 304 Stainless Steel finish:Satin,
486	Supplying, fitting and fixing of following types fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
487	15mmx25mm longCP Extention piece
488	15mm PVC Connection Pipe
489	125mm CP grating
490	15mm C.P. Flange
491	Supplying all materials labour T & P fitting & fixing of white glazed vitreous china ware porcelain counter basin approved make including all jointing materials and cost,taxes,conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT
492	Porcelain Under Counter Basin Size : 485x370x205mm
493	Porcelain Counter Top Basin Size: 425x340x175mm
494	Supplying all materials labour T & P fitting & fixing of white glazed vitreous china ware porcelainWall Hung Basin & Half pedestal of approved make including all jointing materials and cost, taxes, conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT
495	Wall Hung Porcelain Basin Size : 620x480x185mm & Half Pedestal.
496	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) with integral 'p' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT.
497	Rimless Back to Wall WC with UF Soft Close Slim SeatCover, Hinges,Fixing Accessories and Accessories Set.Size:360x575x410mm,P trap-180mm
498	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including , fixing 100mm dia 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer-In-Charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQIVALENT
499	Orissa PanSize:440x590x250mm.
500	Supplying all materials, labour, T&P and fixing Flat back large pattern urinal including connecting the urinal with 50mm dia pvc waste pipe, including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Make: JAQUAR / HINDWARE / PARRYWARE OR EQUIVALENT

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Civil Construction Tenders

Toilet Bathroom Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of (1) Amenity Block At North Parking, (2) Toilet Block At Different Locations Such As Near Kedargouri Temple, Near Taranga Club, Near Crafts Pavilion, Drop Off Facility & (3) Ritual Pavilion At Ekamra Kshetra Under Ekamra Con, Bhubaneswar-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of (1) Amenity Block At North Parking, (2) Toilet Block At Different Locations Such As Near Kedargouri Temple, Near Taranga Club, Near Crafts Pavilion, Drop Off Facility & (3) Ritual Pavilion At Ekamra Kshetra Under Ekamra Con, Bhubaneswar-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us