Tender For Annual Plan-Prno : 125-Construction Work Of Puthanparamba Krishnappilla Road-Padiyoor-Kalliad Gp-Ch : 0/111.5-0/200-General Civil Work-Asset No : 212910050000000146, Kannur-Kerala
TDR : 54460922
Tender Notice
BOQ
2 Days Left
Kannur
Kerala
Tender For Annual Plan-Prno : 125-Construction Work Of Puthanparamba Krishnappilla Road-Padiyoor-Kalliad Gp-Ch : 0/111.5-0/200-General Civil Work-Asset No : 212910050000000146
Name of Work:- Annual Plan-PRNO : 125-CONSTRUCTION WORK OF PUTHANPARAMBA KRISHNAPPILLA ROAD-PADIYOOR-KALLIAD GP-CH : 0/111.5-0/200-General Civil Work-ASSET NO : 212910050000000146
Sl. No.
Item Description
1
PRNO : 125-CONSTRUCTION WORK OF PUTHANPARAMBA KRISHNAPPILLA ROAD
2
3.15.2:Compacting Original Ground (ii) Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.
3
4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil.
4
4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead
5
75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
6
75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
7
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
8
75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification(i) Nominal mix (1:2:4)
9
OD483841/2025-2026:Supplying and fitting name boards of size 75cm x 45cm. made with GI plain sheets 1.25 mmthick (class IIII) fitted with 35X35x4 mm MS angle 2 Nos horizontally and 3 Nos vertically tomake a frame for strengthening the GI sheet, fitted 2 Nos. 32 mm GI pipe vertically 90 cmabove from ground level and fixing in cement concrete 1:2:4, 30 cm X 30 cm X 30 cm.including cost and conveyance of all materials all labour charges, fabricating etc. complete Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
