|
| 1 | ELECTRICAL |
| 2 | OD494979/2025-2026:Supply of 415 v, three phase 7.5 HP, 5.5 kw submersible pump for 140 mm well, 50 mm pipe size, having a delivery/discharge range of 219 mtr as required ( kirlosker 50HHF-815 OR equivalent Aksah, dcan make) |
| 3 | OD494982/2025-2026: Charges for installation of above 7.5 H.P, 3 phase , submersible pump set into well after connecting the delivery pipes, and lead cables to motor and hanging the unit on poly propelyne rope to 100 Meters depth in trouble free operation and conducting trail run satisfactorly . |
| 4 | OD494983/2025-2026:Supply and providing 415 V, 50 Hz, 3 phase submersible pump controler, suitable for 7 hp, with starter, O/L relay (9-14 A), ammeter, volt meter, add on block (i-ADS) for Dry run protection, phase reversal and single phase preventer using wire harness kit etc in sheet steel enclosure. (L&T MU-G10 DOL) |
| 5 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 6 | 90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame) |
| 7 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 8 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 9 | 14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. |
| 10 | 14.2:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. |
| 11 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 12 | 90.14.24.5:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors. |
| 13 | OD494974/2025-2026:Supply and providing 4 pole enclosure for independent mounting of MCB/RCCB/Isolator etc. as required. |
| 14 | OD494964/2025-2026:63 A 4 Pole 440 V, 30 mA RCCB |
| 15 | OD494972/2025-2026:Supply and providing 415V, 63A, AC23A, TPN switch dis connector fuse unit in sheet steel enclosure complete with handle, door interlock etc on existing angle iron frame work or directly to wall using necessary bolts and nuts, making good the damages, colour washing etc. including giving necessary connections as required. |
| 16 | 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 17 | 90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size |
| 18 | 90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm |
| 19 | 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm |
| 20 | OD494975/2025-2026:Supply and providing indication lamp in red colour,yellow colour and blue colour |
| 21 | OD494969/2025-2026:supply ad fixing 50 mm PVC Male adapter in position with accessories as required |
| 22 | OD494981/2025-2026:Supply, providing ad fixing 50 mm size GI union coupling in position with accessories as required |
| 23 | OD494977/2025-2026:Supply and fixing 50 mm size GI coupling in position as required |
| 24 | OD494963/2025-2026:Supply and providing 50 mm size GI bend in position with accessories as required |
| 25 | OD494968/2025-2026:Supply, conveyance and fixing 50 mm GM Non Return Valve-horizontal and fixing in position using suitable accessories as required |
| 26 | OD494976/2025-2026:supply, threading, laying and jointing of the following sizes G.I pipe as required.50 mm size GI pipe (medium class) |
| 27 | OD494967/2025-2026:supply, providing and existing of submersible threaded, standard duty (RED) delivery column pipe of size 50 mm OD in the bore well as required |
| 28 | OD494971/2025-2026:Supply and providing 16.00 mm Dia poly propelyine rope |
| 29 | OD494962/2025-2026:Supply and providing M.S. borewell clamb with bolt and nut. |
| 30 | OD494984/2025-2026:Supply and providing PVC Bore Well End Cap 150 MM |
| 31 | OD502457/2025-2026:charges for making connections, Lowering the pump set in the bore well using trifold and pulley blocks, extending delivery pipes one by one, hanging the pump using nylon rope, checking the controls and accessories, trial run , testing and commissioning etc, as required |
| 32 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 33 | 5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 34 | OD494973/2025-2026:Supply and providing Test joint for earthing made up of 2 nos, 25x5 mm GI strip, 25 cm long placed on either sides of earth leads and watering pipe, bending, drilling and tightening with 4 sets of brass/SS nut, bolt, washer etc as required. |
| 35 | 90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 36 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 37 | 90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) |
| 38 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 39 | OD494970/2025-2026:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. |
| 40 | OD494966/2025-2026:Supply and providing 25X3 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. |
| 41 | OD494980/2025-2026:Supply and providing dust and vermin proof, wall mounting, Hot press moulded SMC Meter Box of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit, with 350x481x210 mm or nearest size. (Sintex GS-MB 3750 or equivalent make). |
| 42 | OD494965/2025-2026:Supply and fixing 63A backelite HRC Fuse unit with HRC fuse link in the existing meter board and giving connections as required. |
| 43 | OD494978/2025-2026:Supply and fixing 63A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections as required. Please Enable Macros to View BoQ information |
