|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed |
| 2 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 4 | Granite stone slabs, 16 to 18mm thick, width and length as per site requirement, best quality machine cut and polished to be fixed in floors, cooking platform, tread, riser of steps and vertical surfaces etc and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of outer edges and corners where directed with and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 5 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 6 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 7 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge |
| 9 | 125mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. |
| 10 | 150mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. |
| 11 | Butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed. |
| 12 | 100 mm size butt hinges medium weight cold rolled stainless steel complete, all as specified and directed. |
| 13 | 200 mm size aluminium anodized, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 14 | 150 mm size aluminium anodized, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 15 | 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 16 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, complete all as specified and directed. |
| 17 | Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of aperture 1.40 mm in fixed with tinned tacks, complete all as specified and directed. |
| 18 | PVC (SWR) floor trap 75mm bore, plain with grating incl jointing with solvent cement, complete all as specified and directed. |
| 19 | PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed. |
| 20 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed. |
| 21 | PVC (SWR) pipe100mm bore single socketed in any length with rubber ring joints, laid in trenches or in flors, complete all as specified and directed. |
| 22 | PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in flors, complete all as specified and directed. |
| 23 | 75 mm bore PVC (SWR) bends of any radius, with access door complete all as specified and directed. |
| 24 | 110 mm bore PVC (SWR) bends of any radius, with access door complete all as specified and directed. |
| 25 | PVC (SWR) floor trap 100mm bore, plain with grating incl jointing with solvent cement, complete all as specified and directed. |
| 26 | PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe, with oval access door complete all as specified and directed. |
| 27 | PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe, with oval access door complete all as specified and directed. |
| 28 | 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 29 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 30 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 31 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 32 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed pipe etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 33 | Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), complete all as specified and directed. |
| 34 | Ceramic wall mount / wall hung western toilet /rimless commode/ water closet with soft close seat cover 52 x 36 x 36cm , white including all necessary accessories complete all as specified and directed |
| 35 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia CP flush pipe (long type for squatting pan), complete all as specified & directed. |
| 36 | Vitreous China white half stall urinal, fixed against wall in cement mortar (1:2), securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed. |
| 37 | Urinal spreader of PTMT suitable for 15mm bore pipe (minimum weight 90 gms), complete all as specified & directed. |
| 38 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed. |
| 39 | Liquid soap container of CP fixed fixed with and including Chromium plated brassscrews and wooden/plastic cleats (minimum weight 105 gm) complete all as specified and directed. |
| 40 | Towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed. |
| 41 | Bevelled edge mirror size 600mm x 450 mm, 5mm thick of selected quality glass mounded on 5 mm thick PVC board fixed to wooden plugs with chromium plated brass screws and cup washer with aluminium channel of suitable section alround , all as specified & directed. |
| 42 | PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed. |
| 43 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, complete all as specified and directed. |
| 44 | Toilet paper holder with flat recessed type stainless steel Complete all asspecified and directed.\\" |
| 45 | Vitreous china wash hand basin, white, angle back size 600 x 480 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand, complete all as specified and directed. |
| 46 | Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed. |
| 47 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 48 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, complete all as specified and directed. |
| 49 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both end for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 50 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered with screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, fixed as in repair complete all as specified and directed. |
| 51 | Vitreous china designer counter top was hand basin of size 457mm x 330mm x 127mm white gold designer lip, including CP waste coupling and PVC waste pipe complete all as specified and directed. |
| 52 | Viterous china urinal partition white of size 310mm x 700mm compelte all as specified and directed. |
| 53 | 5.00mm thick selected quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 54 | 3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed. |
| 55 | Door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 56 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With Semi preforated 12mm thick micro tegular edged GRG false ceiling tiles, false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99% NRC .05 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides ) comprising of main- T runners of size 15 x32 mm of length 1200mm, and secondary intermediate Cross-T of size 15 x 32mm of length 600mm to from grid module of size 600 x 600mm, suspended form ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diaMetre M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron periMetre wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-in-Charge. |
| 57 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed |
| 58 | Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed . |
| 59 | Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 60 | Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 61 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 62 | Rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceilings , finished fair and smooth, complete all as specified and directed. |
| 63 | Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 64 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for frame work of shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 65 | Surface excavation not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified. |
| 66 | 50mm thick plain cement concrete 1:3:6 (type C-1 using 20mm graded aggregate), as in Plinth protection, including broom/ spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and including dividing the panels with PVC strip in joints in sqaures n.exc 2m each side finishing cement concrete even and smooth without using extra cement, complete all as specified and directed. |
| 67 | Cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately). |
| 68 | Hard core of broken stone or boulders of gauge exc. 63mm but n.ec 100mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 69 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 70 | Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed. |
| 71 | Concrete interlocking paver block, with grey cement and pigment, glossy finish design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed |
| 72 | Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, manholes, pier hole etc. and getting out, complete all as specified. |
| 73 | providing cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate, as in foundation filling and mass concrete etc., complete all as specified and as directed |
| 74 | PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 75 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed. |
| 76 | All as sper serial item No 75 hereinfore but add or deduct for each 25mm girth or part thereof of under 30cm over compelte all as specified and directed. |
| 77 | Factory made RCC M-35 pre cast man hole covers (Medium duty), of size 600mm x 1200mm x 100mm with plain faces, including MS ring, MS frame, set in position in cement mortar 1:4, complete all as specified and directed. |
| 78 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. |
| 79 | Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 80 | Removal of excavated material to distance exc. 50 metre but not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 81 | Excavation over areas in hard/dense soil not exceeding 1.50 metre in depth and getting out complete, all as specified. |
| 82 | Framed work such as Gates, grills, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, complete all as specified & directed by Engineer-in-charge. |
| 83 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 84 | 25mm thick Plain cement concrete 1:2:4 type B-0using 12.5mm graded crushed stone aggregate as in sub base complete all as specified & directed. |
| 85 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 86 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint including all necessary scaffolding and safety arrangements, complete all as specified and directed. |
| 87 | Plain cement concrete type D-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed. |
| 88 | Factory made coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed |
| 89 | Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engineer-in-Charge |
| 90 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed by Engineer-in-charge. |
| 91 | Napkin hanger for bathroom silver with chrome finish, corrosion resistant premium metal construction modern design complete all as specified and directed. |
| 92 | Convex mirror minimum 100cm in dia outdoor type, body material-polycarbonate, acrylic and mirror thickness not less than 3mm for traffic security purpose mounted on 2mtr long Stainless steel pipe Gde 30G fixed with nut, bolt and adjustable bracket/ clamp system including necessary excavation and embedded in cement concrete type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 93 | Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. |
| 94 | All as per serial item 93 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed |
| 95 | All as per serial item 93 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed |
| 96 | All as per serial item 93 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area) cable as earth continuity conductor |
| 97 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed. |
| 98 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed. |
| 99 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 100 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 101 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge. |
| 102 | Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 103 | LED lamp 9 watts, B-22 type complete all as specified . |
| 104 | LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 105 | LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed. |
| 106 | LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size fixed as in repair complete all as specified and directed. |
| 107 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 108 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 109 | MCB, SPN, 240 volt, 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 110 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm and provision of flexible copper cable 3 core from ceiling rose to exhaust fan complete all as specified and directed. |
| 111 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 2 core, laid in trenches , sleeving through pipes of fixed on poles & wall or laid under floors inlcuding jointing with suitable size of alumunium lugs as specified and directed. |
| 112 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of 20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete , all as specified and directed. Please Enable Macros to View BoQ information |
