|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and directed. |
| 4 | M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for 5 mm thick cement plaster in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.Note :- Repairs in patch work & height of upto 6.50 Mtr to be carried. |
| 6 | M&L for rendering 15mm thick plaster in CM 1:4 in two layer with WPC on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement. (WPC shall be measured and paid separately).Note :- Repairs in patch work & height of walls upto 6.50 Mtr to be carried |
| 7 | Supply only liquid water proofing compound conforming to IS-2645,1975. |
| 8 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 9 | Material & Labour for preparing new Plastered Surfaces of Walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 10 | Material & Labour for complete removal of existing treatment of Walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 11 | M&L complete removal existing wall surface applying two coats of oil bound distemper over a coat of alkali resistant priming paint including preparation of plastered surfaces of wall complete all as specified and directed by Engineer - in -Charge. |
| 12 | M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered surfaces of wall complete all as specified and directed by Engineer - in -Charge. |
| 13 | All as per Item No 12 here in before but on ceiling |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the rubbies complete all as specified and directed. |
| 15 | M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 16 | M&L Coloured Glazed ceramic tiles in vertical surfaces350X250X7mm/ 450X350X 7mm thick as in skirting /dado, set and jointed in cement slurry and pointed in coloured cement to match laid over 10mm thick cement backing coat in CM 1:3 complete all as specified and directed. |
| 17 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 18 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15mm thick cement backing coat in CM 1:4 complete all as specified and as directed . |
| 19 | Taking down existing chowkats or frames n.exc.1.5 Sqm each removing to from store or handed over to contractor complete all as specified and directed. |
| 20 | Taking down Wooden Chowkat or Frame with Shutter (without taking off Shutter from the Frame), exc. 1.5 Square Metre but not exc. 4.0 Square Metre Each, complete all as specified and as directed. |
| 21 | S&F factory made single extruded WPC (wood polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 50x110mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonet and natural fibre (wood powder/rick husk wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed screw SS crews having minimum frame density of 750kg/Cum, screw withdrawl strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in postion with MS hold fast/lugs /SS dash fasterners of required dia and length complete as per direction of Engineer-in-charge.(MS hold fast/lugsof SS dash fastenrers shall be paid for seprartely). |
| 22 | S&F factory made single extruded WPC (wood polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonet and natural fibre (wood powder/rick husk wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed screw SS crews having minimum frame density of 750kg/Cum, screw withdrawl strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in postion with MS hold fast/lugs /SS dash fasterners of required dia and length complete as per direction of Engineer-in-charge.(MS hold fast/lugsof SS dash fastenrers shall be paid for seprartely). |
| 23 | Providing and fixing 30mm thick factory made wire mesh solid WPC door shutter consisting of density 500Kg/Cum manufactured by and ISO 9001-2015 certified Company, door to be paneled with SS mosquito mesh and XTN aluminum mesh for additionla strength and safery purpose. (confirming as per IS:4020) . The door should be water proof, termite proof, fire retradant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS power coted btt hinges size 100mm and 32mm long screw drilled suitable to pass through both the walls of the MS tube complete all as specified and as directed.Note : Cost of SS mosquiteo mesh shall deemed to be included in the quoted unit rate. |
| 24 | Providing and fixing factory made single extruded WPC (wood polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K valure 58-60 (Suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non toxic additives (mximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (Edge), minimum compressive strength of 50N/mm2, modules of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be lamindated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engnieer in Charge. |
| 25 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 26 | S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 27 | Supply only Sheet Glass 4.8mm thick, Ordinary quality and glazing in aluminium door and windwos shutter n.exc. 0.50 Sqm in Each Pane of Windows, complete all as specified and as directed. |
| 28 | Supply only Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 29 | S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed. |
| 30 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed. |
| 31 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 32 | Taking up or down old/chocked water tubings 15mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Taking up or down old/chocked water tubings 20 mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor acomplete all as specified and as directed by Engineer-in-Charge. |
| 34 | Supply and fixing 15 mm outer dia UPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 35 | All as per item No 34 here in before but 20 mm bore tube |
| 36 | S&F in repair facny type Pillar taps, cast copper alloy, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 37 | S&F in repairs 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed long body fancy type heavy duty with wall flange complete all as specified and as directed. |
| 38 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 39 | S & F in repairs Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed. |
| 40 | S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed. |
| 41 | S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 42 | S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 43 | M&L for Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' size 100x100 mm complete all as specified and as directed. |
| 44 | S & F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 45 | S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specifeid and as directed. |
| 46 | S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed. |
| 47 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed |
| 48 | S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 49 | S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 50 | S & F in repair PVC (SWR) bends any 75mm bore complete all as specified and as directed |
| 51 | S & F in repair PVC (SWR) bends any 110mm bore complete all as specified and as directed |
| 52 | S & F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed |
| 53 | S&F in repairs 20 mm brass chromium plateds towel rail of 20mm dia and 600mm in length 'D' shaped between flanges complete all as specified and as directed |
| 54 | S&F in repairs for powder coated aluminum peg set of 4 solid body complete all as specified and as directed. |
| 55 | Disconnecting existing tanks, setting aside (or lowering if required) for hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 56 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 57 | Supply & fixing with semi perforated 12mmthick micro tegular edged GRG false tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 58 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed. |
| 59 | S&F Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting complete all as specified and as directed. |
| 60 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new steel surfaces complete all as specified and as directed. |
| 61 | S&F Framed work such as grills gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 62 | M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and directed. |
| 63 | S&F in repairs curtain rod / harrison rails miold steel chromium plated with fixed brackets , stops, rollers etc, 25 mm dia with fixed brackets, stops rollers etc complete all as specified and as directed |
| 64 | S&F in repairs brackets mild steel chromium plated suitable for curtain rod 25 mm dia complete all as specified and as directed |
| 65 | Dismantling/removal of existing water proofing membrane of any description and removal of material out of MOD land/sites etc complete all as specified and directed. |
| 66 | M&L for preapring clean and dried plaster surface and applying a coat of oil based bitumen primer confirming to (IS: 3384) at the rate of 0.30 litrs per Sqm and then laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with non woven polyster reniforced membrane having thermal insulation with mineral gravel on upper side of membrane land on primed surface by torch application method complete all as specified and directed. |
| 67 | S&F in repair rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position includng Dismantling exisiting water tanks and removing to store complete all as specified and as directed |
| 68 | S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and as directed |
| 69 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 70 | M&L Cement Concrete 1:4:8 (40mm Graded Stone Aggregate) 100mm thick in Sub-bases, complete all as specified and as directed. |
| 71 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 72 | M&L sand filling under floors or in foundation incl watering and consolidation complete all as specified and as directed. |
| 73 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 74 | S&F double bowl sink for kitchen/heavy duty stainless steel, silver matt style of size 32x18x9 inches with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall complete all as specified and as directed. |
| 75 | S&F in repair flexible kitchen mixer Make : Hindware cat part No. F920001 or techno commercially equivalent as approved by GE. |
| 76 | S & F modular kitchen made of 18 mm thick HDHMR board one side prelaminated and other side plain to make kitchen cabinet Shutter/ drawer Front shutters and 18mm HDHMR board both side plain of any colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications including S & F of one soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for each cabinet shutters, S & F 3D soft close undermount/Quadro slide 1 pair for each drawer full extension having load capacity 50 kgs and S & F of stainless steel handles 100 mm size one for each kitchen cabinet shutters complete as per specifications and as directed by the Engineer - in - charge.Note : For payment purpose, meausrement will be done in Sqm for visible front face only. |
| 77 | S & F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 78 | S & F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 79 | S & F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 80 | S & F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 81 | S & F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 82 | S & F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 83 | S & F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 84 | S & F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge. |
| 85 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 86 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in oncrete and making good disturbed ground complete all as specified and as directed. |
| 87 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed. |
| 88 | M&L for Cement concrete 1:2:4 type B2 as in foundations, filling and mass concrete complete all as specified and as directed. |
| 89 | S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 90 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. |
| 91 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 92 | M&L for mild steel round bars 10mm dia and over, horizontaly woven in chain link fencing including cut to length, bent to shape required, including cranking, bending etc complete all as specified and as directed. |
| 93 | S&F Mild steel screw bolts 12mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10m long complete all as specified and as directed. |
| 94 | Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed. |
| 95 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr in Charge. |
| 96 | M&L Brick Work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in Cement Mortar 1:4, complete all as specified and as directed. |
| 97 | M&L for fixing Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 98 | M&L for Fe 410 grade E 250 rolled mild steel framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 99 | Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, sockets light fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. |
| 100 | M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concelled conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following :- (a) One light point controlled by one switch complete |
| 101 | All as per item No 100 here in before but one fan point controlled by one switch complete. |
| 102 | All as per item No 100 here in before but One 3 pin socket out let 5 Amps on the independent board. |
| 103 | All as per item No 100 here in before but One 3 Pin socket out let 5 Amps on the same board. |
| 104 | All as per item No 100 here in before but One bell/buzzer point controlled by one push type switch on independent board |
| 105 | All as per item No 100 here in before but with cable of size 2.5 Sqmm PVC insulated on independent board for power plug 15 Amps. |
| 106 | Supply and fixing Modular switch one way 6A,1 Module, complete all as specified and directed. |
| 107 | Supply and fixing Modular switch one way 16A,1 Module, complete all as specified and directed. |
| 108 | Supply and fixing Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed. |
| 109 | Supply and fixing Modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and directed. |
| 110 | Supply and fixing Modular Fan Regulator, 120W, 2 module complete all as specified and directed. |
| 111 | Supply & fix ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed. |
| 112 | Supplying and fixing modular bell push 6A, 1 module complete all as specified and directed. |
| 113 | Supplying and fixing Buzer, Ding Dong AC 230 Volts single pole complete all as specified and directed. |
| 114 | M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire complete all as specified and directed. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length. |
| 115 | M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of 3 run of single core 10 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl one run of 10 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire complete all as specified and directed. Note: four runs of cable and one run of conduit & earth wire shall be measured as one run length. |
| 116 | M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 6 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl 6 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire complete all as specified and directed. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length. |
| 117 | Taking down old unserviceable DBs/MCCBs/MCBs complete all as specified and directed by Engineer-in-Charge. |
| 118 | Supplying and fixing of sheet metal enclosure, TPN DB, double door 4 way, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) SPN/ TPN complete all as directed by Engineer-in-Charge. |
| 119 | Supplying and fixing of sheet metal enclosure, single phase, double door SPN DB 8 way, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) SPN/ TPN complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supplying and fixing 415 Volts 10 KA 'Ç' Curve MCB TPN 4 pole of 63 Amp capacity complete all as as specified and directed. |
| 121 | Supply & fix MCB SPN 40 Amps 10 KA 240 V, 10 KA 'C' Curve complete all as specified and directed. |
| 122 | Supply & fix MCB SP 6 to 32 Amps 10 KA 240 V, 10 KA 'C' Curve complete all as specified and directed. |
| 123 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 124 | Supply and fixing LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including conencting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | Supply and fixing LED light fittings 1 x 10 watt bulkhead luminaires including LED light driver holder conencting up with three core flexible copper cable of suitable size complete all as specified and directed. |
| 126 | Supplying and fixing LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high effeciency, PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size compelte all as specified and directed. Please Enable Macros to View BoQ information |
| 127 | Supplying and fixing LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high effeciency, PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size compelte all as specified and directed. Please Enable Macros to View BoQ information |
