|
| 1 | B/R PORTION S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 2 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 3 | De-watering from the existing service water tanks of capacity exc 250 ltrs and n.exc 500 ltrs kept over roof slab/ staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/ jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaning including writing TANK CLEANED ON (date) on the outer surface of tank complete all as specified and directed. |
| 4 | All as per item no 3.00 above but exceeding 500 ltr and not exceeding 1000 ltr in capacity complete all as specified and directed. |
| 5 | Taking down 15mm bore steel water tubing and connections complete all as specified and directed. |
| 6 | S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 7 | Taking down 20mm bore steel water tubing and connections complete all as specified and directed. |
| 8 | S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 9 | S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete, including taking up or down steel tubing and connections complete all as specified and directed. |
| 10 | S&F for 15mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete, including taking up or down steel tubing and connections complete all as specified and directed. |
| 11 | M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed. |
| 12 | Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 13 | Material and labour for brass elbow (brass insert) of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 14 | Material and labour for union of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 15 | S&F in repairs 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 16 | S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 17 | S& F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 18 | S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed. |
| 19 | S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed. |
| 20 | S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 21 | S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed. |
| 22 | Hacking out old unserviceable glass /broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and directed. |
| 23 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 24 | S&F 5.50 mm thick tinted glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden or aluminium frame in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 25 | Ditto all as per item No 23 above but Figured glass, pinhead type in squares not exc 0.5 sqm each pane complete all as specified and as directed. |
| 26 | S&F in repairs low density polyethylene(LDPE) pipes for working pressure rating 6 Kg/ Sqcm with polyethylene thread union and check nuts for waste pipe of WHB, 750mm long, 32mm dia complete all as specified and directed. |
| 27 | S&F in repairs 40mm dia, 75cm long PVC low density waste pipe for stainless steel sink of working pressure rating @ 4 Kg/ Sqcm with polyethylene union and check nuts complete all as specified and directed. |
| 28 | S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed. |
| 29 | S&F in repairs 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed. |
| 30 | S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 31 | S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 32 | S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 33 | S&F fillets/ beading (any size) for securing wiremesh to steel/ wooden frame/ window and similar work and removing old beads complete all as specified and directed. |
| 34 | S&F in repairs 15mm bore, 45cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed. |
| 35 | S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 36 | S & F chromium plated health faucet (hand jet) 15mm bore with fittings, and accessories complete all as specified and directed. |
| 37 | S&F in repairs 15mm dia bore, two way bib cock with wall flange, screwed down for uPVC/iron Pipe complete all as specified and directed. |
| 38 | S&F in repairs 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with fancy type chromium plated for iron pipe or for unions angle cock complete all as specified and directed. |
| 39 | S&F in repairs brass chromium plated shower rose of 125mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 40 | S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 42 | S&F 600mm x 450mm beveiled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers as in repairs complete all as specified and directed. |
| 43 | S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed. |
| 44 | S&F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repairs 15 mm bore Brass CP spindle with cap for mixer tap, stop cock, pillar tap complete all as specified and directed. |
| 46 | Welding in repairs n.exc. 2.5cm in length and thickness of metal/ steel n.exc. 6mm complete all as specified and as directed. |
| 47 | Taking down cement plaster from brick/ concrete/ stone surfaces including racking out joint, hacking for key and scrubing down with water etc all as complete all as specified and directed. |
| 48 | M&L for Rendring 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls ,finishing surfaces even and smooth w/o using extra cement. complete all as specified and directed. Note : 1. mixed with water proofing compound @ 3% by weight of cement complete all as specified. 2. Water Proofing compound shall be measured and paid for seprately as \\"Supply Only\\" |
| 49 | M&L for rendering 10mm thick on concrete surfaces or surfaces other than fair face of brick work in CM 1:6 finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L 5 mm thick rendering in CM 1:3 on concrete surface of ceiling, finished even and smooth using without extra cement complete all as specified and directed. |
| 51 | M&L for preparation of old distempered surfaces of wall and applying one coat of oil bound distemper at etc complete all as specified and directed. |
| 52 | All as per item hereinabove but on ceiling surfaces complete all as specified and directed. |
| 53 | M&L for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm over Old wall including necessary scaffolding required for painting work, safety measures etc. complete all as specified and directed. |
| 54 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over average 2mm thick wall care putty complete all as specified and directed. |
| 55 | M&L preparation of newly plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed. |
| 56 | M&L preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 57 | M&L for one coats of white wash, old surfaces of wall complete all as specified and directed. |
| 58 | M&L for one coats of white wash, old surfaces of ceiling complete all as specified and directed. |
| 59 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 60 | M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc. complete all as specified and directed. |
| 61 | M&L French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed. |
| 62 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc. 4 sqm each complete all as specified and directed. |
| 63 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed. |
| 64 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 65 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed. |
| 66 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed. |
| 67 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and directed. |
| 68 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed. |
| 69 | M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 70 | S&F in repairs 18mm thick Medium density fibre block board, exterior grade, fixed to timber screws framework with interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed. |
| 71 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 72 | S&F extruded aluminium alloy handles, fabricated type, anodized of size 125 mm complete all as specified and directed. |
| 73 | S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed. |
| 74 | Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 75 | M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed. |
| 76 | Dismantling floor or wall tiling incl cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 77 | M&L 25mm thick PCC 1:2:4 type B-0 (wing 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed. |
| 78 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. and jointed neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 79 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 80 | M & L for Vitrified colour Light shade Ceramic tiles 8 to10 mm thick (square/ rectangular) dark shade/ ultracharged polished, Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. |
| 81 | S&F, glazed ceramic tiles coloured 350 x 250mm/ 450 x 350mm 7 mm thick in wall/ dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. |
| 82 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed. |
| 83 | S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 84 | S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 85 | S & F toilet paper holder of brass chromium plated, complete all as specified and directed. |
| 86 | S&F in repairs SS sink with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. |
| 87 | S & F in repairs soap dish chromium plated of size 100 x 100 mm any type, chromium plated brass screws complete all as specified. |
| 88 | S & F in repairs kitchen sink waste couplings size required at site etc. complete all as specified and directed. |
| 89 | S & F in repairs hand wash basion waste couplings size required at site etc. complete all as specified and directed. |
| 90 | S&F in repair for vitreous China wash basin, white, flat back, size 550 x 450mm including necessary brackets, cp couplings, pvc waste pipes etc complete all as specified and directed. |
| 91 | Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed. |
| 92 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified and directed. |
| 93 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. |
| 94 | S & F cloth hangaer stainless steel, anti rust, having extra strength to hang items without bending set in door/ wall, 06 pin hook, 30 cm long for hanging cloth, towel etc length incl screws, fixed as in repair complete all as specified and directed. |
| 95 | S & F in repairs for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed. |
| 96 | Supply & fixing stainless steel plate rack, made out of 1.00 mm thick sheet of size 75 cm x 75 cm fixed as in repairs complete all as specified and directed. |
| 97 | Demolition and beaking up drain AC/PVC pipes set in cement mortar 100 mm and below complete all as specified and directed. |
| 98 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 110 mm complete all as specified and directed. |
| 99 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 75 mm complete all as specified and directed. |
| 100 | S&F PVC (SWR) bends any radius 110 mm dia with access door complete all as specified and directed. |
| 101 | S&F PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and directed. |
| 102 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 103 | S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed. |
| 104 | S & F PVC (SWR) branch piece,110 mm dia single (single Y) equal or unequal complete all as specified and directed. |
| 105 | S & F PVC (SWR) branch piece, 75 mm dia single (single Y) equal or unequal complete all as specified and directed. |
| 106 | S & F PVC (SWR) junction single,110 mm dia (Single T) equal or unequal complete all as specified and directed. |
| 107 | S & F PVC (SWR) junction single,75 mm dia (Single T) equal or unequal complete all as specified and directed. |
| 108 | S & F PVC (SWR) reducers 110 mm dia complete all as specified and directed. |
| 109 | S & F PVC (SWR) reducers 75 mm dia complete all as specified and directed. |
| 110 | S&F in repairs 25mm dia stainlesss steel rods corrugated of approved quality complete all as specified and directed. |
| 111 | S&F in repairs stainlesss steel decorative end brackets suitable for 25mm dia pipes complete all as specified and directed. |
| 112 | Complete removal of entire existing water proofing treatment in any position including tarfelt, plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed. |
| 113 | M & L for PCC 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in roof surface complete all as specified and directed. |
| 114 | M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as \\"Supply Only\\" |
| 115 | Supply only water proofing compound complete all as specified and directed. |
| 116 | M&L for water proofing treatment to sound ,moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injction grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects, application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Undulated surface and pot hole shall be treated with epoxy morter or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124 ) greater than 600 percentage, tensile strength (ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624), 15 KN/M, shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm/ M2, water permeability (DIN-1048) - NIL, services temperature - 40' C to 70 degree 'c, flash point greater than 70 'C HSE complete all as per manufacturer's in struction and as directed.Guidelines:- It is recommanded to provide adequate general and local exhaust ventillations, providing protection to Eye, face, Hand andother skin by wearing appropriate glouse ,google,face cilid,respiratory protection etc,directed in SDS of the product . |
| 117 | M & L for 40 mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 118 | Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises. |
| 119 | S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc complete all as specified and directed. |
| 120 | Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and directed. |
| 121 | S & F Continuous (piano) hinges,40 mm width of flange mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 122 | Dismantling structural steel work incl door , gate etc. complete all as specified and directed. |
| 123 | S & F Joist, channel, angle, or tee sections,grill fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(Gde- E-250) quality-B complete all as specified and directed. |
| 124 | M&L for preparation of old surfaces of manglore tiles roofs including removing dust, dirt, mosand making good roof surface etc and applying one coat of weather resisant acrylic exterior emulsion paint of approved make, complete all as specified and directed.Note :- The coulour scheme of the painting will be as decided by Engr-in-Charge |
| 125 | M&L for preparation of Interior wall surface, or any waterfall area including removing all fungus, dirt, grease and patches and drying surfaces and filling cracks if any with crack filler and appling two coats antifungal damp proof coating with time difference of min 04 hrs. making surface ready to receive final surface finish area of applying two coats 1.50 Sqm per Kg material in horrizontal and vertical aplication and as per manufacturers. complete all as specified and directed. |
| 126 | Preparation of old decorated surfaces of walls/ roof projection/ chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply one coats of external waterproof emulsion paint with primer including necessary scaffolding required for painting work & safety measures at any height of bldg complete all as specified and directed. |
| 127 | M&L for preparing old painted surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on bricks, kerb stone, stone, concrete surfaces, asbestos cement or plastered surfaces complete all as specified and directed. |
| 128 | M&L for preparation of old decorated surface of any description over 10 cm width or girth, walls, soffits/ facia of chajja/ roof slab etc. and applying one coat of cement base paint at any height of bldg including necessary scaffolding required for painting work, safety measures complete all as specified and directed. |
| 129 | S&F in repairs factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, Frame (108mm x 48mm), sliding sash (38mm x 61mm). Sliding mesh Sash (38mm x 61mm) Sliding interlock (One vertical length in each shutters) (45mm x 34mm), Glazing bead (19mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick glazing with selected quality glass and as required accessories complete all as specified and directed.Note 01: The unit rate quoted by contractor includes cost of glass,mesh and includes all other connected accessories. Net Opening will be measured for payment purpose).Note 02: uPVC frame and sash extruded profiles minus 5% tolerance in dimensioni ie in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account made. Note 03: The rate quoted shall be including of necessary scaffold & safety measurers to be followed. |
| 130 | S&F in repair extruded aluminium alloy barrel tower bolt, anodized of size 125 mm complete all as specified and directed. |
| 131 | S&F in repair extruded aluminium alloy handles, fabricated type, anodized of size 125 mm complete all as specified and directed. |
| 132 | S&F in repair 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified & directed. |
| 133 | Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 134 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ clading to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 135 | M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismantling single layer Manglore pattern or similar tiles in roofing including dismantling of existing old U/s roof tiling and removing rubbish off the premises complete all as specified and directed. |
| 136 | All as per item herein above but except tiles complete all as specified and directed. |
| 137 | M&L for Ridges or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc including dismantling of old ridges and rubbish off the premises complete all as specified and directed. |
| 138 | Dismantling battens for tiles, shingle etc. of any size including tilting fillets spaced exc. 15 cm complete all as specified and directed. |
| 139 | M&L 2nd class hard wood clean sawn battens at 30 cm spacing having sectional area exc. 5 and not exc.15 Sqcm complete all as specified and directed. |
| 140 | M&L for 2nd class hardwood, clean sawn, in scantling timber work incl. dismantling of old U/s scantling and removing rubbish off the premises complete all as specified and directed. |
| 141 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets Complete all as specified and as directed. |
| 142 | M&L for Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/ 600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Designer Ceiling Board (Density>1200 Kg/m3, Modulus of Rupture (M.O.R)-15.85 MPa, Thermal Conductivity(K)-0.0872 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling complete all as specified and directed. |
| 143 | M&L for Eaves/weather boarding with 20mm thick fibre cement board (Non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fibre tape as per manufacturer's instructions complete of approved arch pattern, size, colour and shape including dismantling of old boarding/eaves board fixed in any position complete all as specified and directed. |
| 144 | S&F in repair 304 grade stainless steel work as in railing made of hollow tubes,channels plates, etc with hand rail, baluster, including cutting, Stainless steel welding ,cutting,buffing,grinding,polishing and fixing of stainless steel baluster/railing with necessary all acessories and complete all as specified and directed. |
| 145 | M&L for 12mm thick clear border designed toughened glass approved by Engr -in-charge fixed to railings, door , window as directed by Engr-in-Charge including necessary acessories, nails,cleats, screw complete all as specified and directed. |
| 146 | M&L plain cement concrete type D-2 1:4:8 (40mm graded aggregate) as in subbase 75mm thick complete all as specified and directed. |
| 147 | S&F for glossy finished chequered cement concrete tiles 30cm x 30cm x 30mm / 20 cm x 20cm x 25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry with and including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed. |
| 148 | E/M PORTIONTaking down carefully aluminium / copper point wiring any type for one light, fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 149 | E/M PORTIONTaking down carefully aluminium / copper point wiring any type for one light, fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed. Please Enable Macros to View BoQ information |
