|
| 1 | Schedule 'A' |
| 2 | Comprehensive maint with material and servicing of the Vehicle (Make:- Hero Delux - 01 Nos, RE Bullet 350cc - 05 Nos. and Bajaj Platina - 05 Nos) Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of Engine oil and Air Filter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, Cotton waste, as per make and model required, complete all as specified and directed by Engineer-in-Charge.Note - (i) All spare parts, oil etc items shall be measured and paid Separately under Schedule 'A'. |
| 3 | Supply only in replacement engine Oil (20W40) |
| 4 | Supply only in replacement spark plug |
| 5 | Supply only in replacement rear Socker seal |
| 6 | Supply only in replacement front Socker seal |
| 7 | Supply only in replacement Front wheel bearing |
| 8 | Supply only in replacement Rear wheel bearing |
| 9 | Supply only in replacement Odometer assy including Cable complete. |
| 10 | Supply only in replacement Clutch cable/wire |
| 11 | Supply only in replacement Side looking mirror |
| 12 | Supply only in replacement Indicator lamp complete. |
| 13 | Supply only in replacement Clutch plate |
| 14 | Supply only in replacement Break shoe (Front & Rear) |
| 15 | Supply only in replacement Head light LED bulb |
| 16 | Supply only in replacement Chain sprocket |
| 17 | Supply only in replacement Air filter. |
| 18 | Material & Labour for removing wheel of motorcycle complete with tyre and tube, taking out tube repair, punchere of tube and refixing properly, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for carrying out general periodical servicing and checking of TATA Xenon complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage, complete all as specified and directed by Engineer-in-Charge.Note - (i) Spare parts, oil shall be measured and paid under relevant Items here-in-after. |
| 20 | Supply only in replacement Air filter |
| 21 | Supply only in replacement Oil filter |
| 22 | Supply only in replacement Fuel filter |
| 23 | Supply only in replacement Engine Oil 15W40 |
| 24 | Supply only and top up Engine Oil 15W40 |
| 25 | Supply only in replacement Brake oil |
| 26 | Supply only in replacement Gear oil |
| 27 | Supply only in replacement Coolent |
| 28 | Supply only and top up Coolent |
| 29 | Supply only in replacement Head light LED bulb 12 Volts 120 watt |
| 30 | Supply only in replacement Ball Suspention joint |
| 31 | Supply only in replacement Indicator lamp complete. |
| 32 | Supply only in replacement Fan Belt |
| 33 | Supply only in replacement Door lock assembly |
| 34 | Supply only in replacement Door rubber |
| 35 | Supply only in replacement Side looking mirror |
| 36 | Supply only in replacement Wind Screen Front |
| 37 | Supply only in replacement Wind Screen Rear |
| 38 | Supply only in replacement Window glass |
| 39 | Material & Labour for scrapping, polishing of correded part of iron parts body by mannually/by machine(grinder) and after cleaning painting of vehicle by one coat of primer and two coat of synthetic enamelled paint matching with exsiting colour of TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material & Labour for opening of Power steering assy and cleaning of all pats and replacement of old u/s broken parts 4 crossing rod, sterring oil of TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material & Labour for opening of water Pump assy and arresting leakges by welding/ changing or replacement coupning / bearing, gaskets or any other parts and cleaning of all parts of TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material & Labour for replacement of broken silencer pipe with new one suitable for TATA Xenon complete with out any leakages, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Material & Labour for suspention work of TATA Xenon with repair/replace of steering /tyre end, centre bush, socker system, centre pin, bushes etc., complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material & Labour for repairing of self starter motor of TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Material & Labour for Removing wheel TATA Xenon complete with tyre and tube, taking out tube repair, puncher of tube and refixing properly, complete all as specified and directed by Engineer-in-Charge. |
| 46 | Material & Labour for under body coating with primer and rubber coat, engine protection coating for corrosion prevention and cylincer coating also of TATA Xenon neon, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material & Labour for computerised wheel alignment, wheel balancing and Wheel Rotation of TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing of all foot mats (front & rear both sides) for Vehicle TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing of floor matting (front & rear both sides) best quality complete for TATA Neon, complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing of foot step of best quality of iron body complete for TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and fixing of Horn complete for TATA Xenon including wiring connection and fixing, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and fixing of brass battery terminal with copper lead, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Material & Labour for servicing and cleaning of complete cooling system and radiator air passage, coolant passage of radiator core with suitable chemical solution and arresting leakage, complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing of Seat cover suitable size of Tata Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing Amplfier system suitable for Tata Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing of steering cover of best quality complete for TATA Xenon, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Material & Labour for carrying out general periodical servicing and checking of EICHER 10.75/EICHER truck with chasis mounted areial work platform of 12 mtr working height (Ensol) complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage, complete all as specified and directed by Engineer-in-Charge.Note - (i) Spare parts, oil shall be measured and paid under relevant Items here-in-after. |
| 58 | Supply only in replacement Engine oil of grade 15W40 |
| 59 | Supply only in replacement Oil filter |
| 60 | Supply only in replacement Diesel filter & Water Separator. |
| 61 | Supply only in replacement Coolent pre mixed with distilled water |
| 62 | Supply only in replacement Air filter |
| 63 | Supply only in replacement Brake oil of grade dot.3 |
| 64 | Supply only in replacement Gear oil of grade 90 Nos |
| 65 | Supply only in replacement Side door lock |
| 66 | Material & Labour for servicing and cleaning of complete cooling system and radiator air passage, coolant passage of radiator core with suitable chemical solution. |
| 67 | Supply and fixing in replacement of rear view mirror with rod complete. |
| 68 | Material & Labour for wheel alignment and balancing complete |
| 69 | Material & Labour for repairing of self starter motor complete all as specified |
| 70 | Material & Labour for repairing of Alternator motor EICHER 10.75 complete all as specified |
| 71 | Supply only in replacement Mud guard cover Front & back side complete. |
| 72 | Supply and fixing in replacement Side indicator, parking light etc with lamp complete as directed. |
| 73 | Supply only in replacement Head Light lamp complete. |
| 74 | Material & Labour for Repairing of Hose Pipe with clip and rubber Bushing, complete all as specified and directed by Engineer-in-Charge. |
| 75 | Material & Labour for Wind Screen Front and rear both complete checking of functioning of head light beam. |
| 76 | Material & Labour for servicing of Dash board & applying polish on dashboard surface for shining and replacement of necessary fasteners, screws, lock etc., complete all as specified and directed by Engineer-in-Charge. |
| 77 | Material & Labour for servicing of fuel tank, cleaninig with pressurized water, arresting leakage drying and refixing the same on its exixting position for smooth and efficient fuctioning of vehicle including Painting, replacement of fuel feed pump, complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply & Fixing in replacement of fuel tank with inlet & outlet connections, welding etc. with existing system and painting two coat of synthetic enamlled, complete all as specified and directed by Engineer-in-Charge. |
| 79 | Material & Labour in replacement of rusted fabriacation of outer driving cabin with matching of existing width, size and thickness of Eicher vehicle with two caot of sinthetic enemal paint, complete all as specified and directed by Engineer-in-Charge.(Only rusted parts fabricated) |
| 80 | Material & Labour in replacement of rusted fabrication of outer trolly backside (if required to fabricate channel/ chesses of trolly mounted ) with matching of existing width, size and thickness of Eicher vehicle with two caot of sinthetic enemal paint, complete all as specified and directed by Engineer-in-Charge.(Only rusted parts fabricated) |
| 81 | Material & Labour for scrapping, polishing of correded part of iron parts body by mannually/by machine(grinder) and after cleaning painting of EICHER 10.75 by one coat of primer and two coat of synthetic enamelled paint matching with exsiting colour, complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply & Fixing in replacement of Wheel cylinder front, complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply & Fixing in replacement of Wheel cylinder Back, complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply & Fixing in replacement of Clutch master cylinder upper, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply & Fixing in replacement of Clutch master cylinder lower, complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply & Fixing in replacement of Brake pipe set, complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply & Fixing in replacement of Clutch master cylinder platform, complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply & Fixing in replacement of Clutch master cylinder pipe set, complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & Fixing in replacement of Fuel pipe set, complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply & Fixing in replacement of wiper set, complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & Fixing in replacement of Silencer pipe, complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & Fixing in replacement of Electrical Spare parts such as copper wire, switchws etc., complete all as specified and directed by Engineer-in-Charge. |
| 93 | Material & Labour for carrying out general periodical servicing and checking of SWIFT DZIRE complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage, complete all as specified and directed by Engineer-in-Charge.Note - (i) Spare parts, oil shall be measured and paid under relevant Items here-in-after. |
| 94 | Supply only in replacement Air filter |
| 95 | Supply only in replacement Oil filter |
| 96 | Supply only in replacement Fuel filter |
| 97 | Supply only in replacement Engine Oil |
| 98 | Supply only in replacement Brake oil |
| 99 | Supply only in replacement Gear oil |
| 100 | Supply only in replacement Wiper assembly with blade |
| 101 | Supply only in replacement Coolent |
| 102 | Supply only in replacement Head Light 100W/120W Complete |
| 103 | Supply only in replacement Fog Light 45W/55W Complete |
| 104 | Supply only in replacement Wind Screen (Front & Rear) |
| 105 | Supply only in replacement Window glass Superior quality as per make and model Complete. |
| 106 | Material & Labour for replacement of following material for Vehicle Swift Dzire :- |
| 107 | (a) Star box with cover front & Rear |
| 108 | (b) Flag rod with flag |
| 109 | (c) Door Mat complete. |
| 110 | (d) Towels |
| 111 | (e) Perfume bottle |
| 112 | (f) floor mat (Fix Type) |
| 113 | (g) seat cover |
| 114 | (h) Foot Matting |
| 115 | Material & Labour for repairing of steering mechanism including replacement of center pin and arms complete including necessary work, complete all as specified and directed by Engineer-in-Charge. |
| 116 | Material & Labour for repairing of self starter and alternator for Vehicle of swift dzire, complete all as specified and directed by Engineer-in-Charge. |
| 117 | Material & Labour for outer body repair of danting and painting of SWIFT DZIRE including minor scraches of vehicle, complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material & Labour for servicing and cleaning of complete cooling system and radiator air passage, coolant passage of radiator core with suitable chemical solution, complete all as specified and directed by Engineer-in-Charge. |
| 119 | Material & Labour for Repairing of Hose Pipe with clip and rubber Bushing, complete all as specified and directed by Engineer-in-Charge. |
| 120 | Material & Labour for servicing of fuel tank, cleaninig with pressurized water, drying and refixing the same on its existing position for smooth and efficient fuctioning of vehicle including replacement of fuel feed pump, complete all as specified and directed by Engineer-in-Charge. |
| 121 | Material & Labour for Servicing of Air conditioner of Swift Dzire including Gas Refiling and charging and also rafrigerent Gas as per required including each Job, complete all as specified and directed by Engineer-in-Charge. |
| 122 | Material & Labour for seat cover superior quality velvet clothes duly cutting and steaching as per existing in shape and size for TATA Xenon complete including fixing of unsv spring, foam with lathariesed clothes for seat all as required, complete all as specified and directed by Engineer-in-Charge. |
| 123 | Supply, fixing and stiching OG colour new tarpoline cover made to required side matching with the vehicle hod size suitable for Eicher 10.75 with complete fitting welding to mild steel strip to the roof size with 2 kg nylon rope and tarpoline as per suitable size and acceesries, complete all as specified and directed by Engineer-in-Charge. |
| 124 | Material & Labour for carrying out general periodical servicing, checking and repairing breakdown of Vehicle ( ie. Bike, TATA Xenon, Eicher and swift dzire) in army area complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage, complete all as specified and directed by Engineer-in-Charge. |
| 125 | Supply & Fixing in replacement with Weather proof coating for suitable for Tata Xenon/Eicher 10.75/EICHER truck with chasis mounted areial work platform of 12 mtr working height(Ensol)/Swift Dezire, complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply & Fixing in replacement of Battery 80 AH 12 Volts maint free, complete all as specified and directed by Engineer-in-Charge. |
| 127 | Supply & Fixing in replacement of Battery 2.5 to 5 AH 12 Volts maint free, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
