|
| 1 | GSLR (6.40 x 4.00 x 3.50 m)Clearing grass and removal of the rubbish up to a distance of 500 M outside the periphery of the area cleared |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 4 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete. All works including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 5 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers with water proof ply 12 mm thick. All works including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 6 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts. All works including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 7 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. All works including cost and conveyance of all materials, labour charges, scaffolding etc. required etc Complete |
| 8 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers. All works including cost and conveyance of all materials, labour charges, scaffolding required etc Complete |
| 9 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform. All works including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 10 | Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide. All works including cost and conveyance of all materials, labour charges, scaffolding required etc. Complete |
| 11 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum. including cost and conveyance of all materials, labourcharges, Scaffoldings etc.complete. |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cementAll work above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum including cost and conveyance of all materials, labourcharges, Scaffoldings etc.complete. |
| 13 | Providing and Placing in position suitable rubber water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete including cost and conveyance of all materials required etc. complete as per directionof Engineer in charge |
| 14 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or moreincluding cost and conveyance of all materials required etc. complete as per directionof Engineer in charge |
| 15 | 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 16 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 17 | 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 18 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. As per direction of Engineer in charge |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre, including cost and conveyance of all materials,labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge |
| 20 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour, including cost and conveyance of all materials, labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge. Two coats |
| 21 | Over Head tank (Inside size - 4.00 x 2.10 x 1.65)Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts, including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 22 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers. All works including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 23 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. All works including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 24 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform. All works including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 25 | Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide. All works including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 26 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cementAll work above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum, including cost and conveyance of all materials, labourcharges, Scaffoldings etc.complete. |
| 27 | Providing and Placing in position suitable rubber water stops conforming to IS : 12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete including cost and conveyance of all materials, labourcharges, etc. complete as per direction of Engineer in charge |
| 28 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more including cost and conveyance of all materials, labourcharges, etc.complete. |
| 29 | 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 30 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 31 | 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 32 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers as per direction of Engineer in charge |
| 33 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre, including cost and conveyance of all materials,labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge |
| 34 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour, including cost and conveyance of all materials, labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge. Two coats |
| 35 | Pump RoomProviding and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size derived from natural sources), including cost and conveyance of all materials, labour charges, etc. Complete as required. |
| 36 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete, including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 37 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers. All works including cost and conveyance of all materials, labour charges, scaffolding etc. Complete as required. |
| 38 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing andreinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall havediscretion to either re-design the mix or bear the cost of extra cement. All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum, including cost and conveyance of all materials, labourcharges, Scaffoldings etc.complete. |
| 39 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more |
| 40 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.) |
| 41 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre, including cost and conveyance of all materials,labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge |
| 42 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour, including cost and conveyance of all materials, labour charges, scaffolding charges etc. complete as per direction of Engineer in Charge. Two coats |
| 43 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, (minimum thickness 5.00 mm) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work, painting over the existing structure after preparing the surface by using wirebrush or emery paper,all works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 45 | Steel WorkSteel work in built up tubular (round, square or rectangular hollow tubes etc.-(minimum thickness 2.00 mm) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 46 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, (minimum thickness 5.00 mm) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 47 | Finishing with Epoxy paint (two or more coats) at all locations after preparing the surface by using wirebrush or emery paper prepared and applied as per manufacturer's specifications including one coat of Epoxy priming coat.All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete.On steel work |
| 48 | Lettering with black Japan pint of approved brand and manufacture including cost and conveyance of all materials, labourcharges, Scaffoldings etc.complete as per direction of Engineer in charge Please Enable Macros to View BoQ information |
