|
| 1 | Supplying of following sizes of PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1 KV grade conformimg to IS:7098(Part-I) i/c connection & testing etc. as required and as per technical specification enclosed. |
| 2 | 4Cx16 Sq.mm |
| 3 | 4Cx6 Sq.mm |
| 4 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (upto 750 mm.) or as directed by Engineer-in-charge including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.40 mm dia (OD-40 mm & ID-32 mm nominal) |
| 5 | Supplying of following sizes of PVC insulated and PVC sheathed/XLPE copper conductor unarmoured power cable of 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed. |
| 6 | 3Cx1.5 |
| 7 | Laying of one number PVC insulated and PVC sheeted/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/DWC pipe / pole as required. |
| 8 | Up to 35 Sq.mm (DSR 2025 E&M/ Item No.- 10.5.1) |
| 9 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (DSR E&M 2025 2.5.1 ) 4 way (4 + 12), Double door |
| 10 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.(DSR E&M 2025 2.1.4) 125 A TP&N |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2025 Item No. 2.10.1) Single pole |
| 12 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) 50 Watt (DSR 2025 E&M/ Item No.- 8.15.1) Please Enable Macros to View BoQ information |
