|
| 1 | Acoustic Treatment (Soundproofing) Inside the Blower Room |
| 2 | OD236151/2025-2026:Construction of acoustic treatment for the blower room, including installation of 50mm thick sound-absorbing wall and ceiling panels with a minimum Noise Reduction Coefficient (NRC) of 0.8, finished with perforated metal sheeting. Provide and install two double-leaf acoustic doors with appropriate seals to prevent noise leakage. Incorporate soundproof louvered ventilators for ventilation requirements. Additionally, construct a 230mm thick solid masonry wall on the open side, finished with plaster and a noise-reflective paint to reduce direct noise transmission. The objective is to effectively mitigate noise impact to nearby residents by combining both internal acoustic absorption and external sound barriers. |
| 3 | Installation and commisiioning of conference hall set up at STP including false ceiling with LED , wall painting, providingA C,, furnitures conference table, LED projector with audio and video system, curtains and all other fittings etc |
| 4 | OD280573/2025-2026:Conference TableTable Size 300cm Lengthx 120cm Table TopWidthxT5cm Heght Made with Exterior Grade BothSide Prelaminated MDF Board. Table Top and LegMDF Board Thick 35mm Having Cable Laying WayMaking in Bottom Portion of TableCable CubyFixed in the Top of Table and lnter Linked Cabling |
| 5 | OD275441/2025-2026:Cushion ChairExecutive Cushion ChairSeat and Back Cushioned withHydraulic System |
| 6 | OD275893/2025-2026:Supplying and fixing 2 TON 5 star Inverter AC( Blue star/Daikin/Voltas/LG) with seperate inverter. |
| 7 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 8 | 12.52.3:Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. |
| 9 | OD276268/2025-2026:Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amps modular socket outlet, ISI marked |
| 10 | OD276303/2025-2026:Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required. 5/6 amps, one way modular switch, ISI marked |
| 11 | OD276308/2025-2026:Wiring for circuit wiring alongwith with earth wire with FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit 2x4 sq.mm +1x4sq.mm earth wire |
| 12 | OD277010/2025-2026:Supplying and fixing Premium Melamine Magnetic Whiteboard of size 90x122 CM |
| 13 | OD277168/2025-2026:Supplying Pedestal fan of approved quality |
| 14 | OD277194/2025-2026:Supplying and fixing door closer of approved quality |
| 15 | OD277216/2025-2026:Electrician for various electrical works |
| 16 | OD277220/2025-2026:Supplying and fixing 12 module (200x150mm) GI box along with modular base & cover plate for modular switches in recess etc. |
| 17 | OD277230/2025-2026:Supplying and fixing 8 way, double door single pole and neutal, sheet steel, MCB distribution board, 240V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interrconnections, power painted including earthing etc as required. (But without MCB/RCCB/Isolator) |
| 18 | OD277232/2025-2026:Supplying and fixing 5A to 32A rating, 240/415V, 10KA, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning as required |
| 19 | OD285888/2025-2026:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \\"C\\" curve,miniature circuit breaker suitable for inductive load of Tripple pole and Neutral in the existingMCB DB complete with connections, testing and commissioning etc. as required. |
| 20 | OD280548/2025-2026:Providing and fixing window blinds (zebra blinds) to the office room and conference room including all charges etc. |
| 21 | OD281844/2025-2026:Providing and instaling professional LED display with audio and video system including speaker, microphone, amplifier etc. including all materials and labour charges as per the direction of departmental officers. |
| 22 | OD283395/2025-2026:Providing LED lighting to false ceiling inclding alla labour and material charges etc. complete |
| 23 | Solar Panel Installation |
| 24 | OD236149/2025-2026:Supply installation All type of testing, trial run and commissioning of solar on grid plant with advanced Mono Perc Half Cut Solar panels, Structures to mount panels, DC cables and connectors DC junction Box, Inverters . AC junction BoxLink,,solar meter with Box, AC cables, Link/CB, TPN Box, Net Meter with approval of KSEB approval and all other electrical and mechanical accessories complete as per the direction of departmental officers and in accordance with Inspectorate standards. All paperwork, statutory fees and allied works with the Electrical inspectorate and KSEB Limited for the approval and to be got approved by Electrical Inspectorate and KSEB LimitedThe system shall feature online monitoring, performance testing, and formal handover with complete documentation. It shall carry a 25-year performance warranty on modules, 5?10 years on inverters, and 1-year workmanship warranty, ensuring seamless integration with the grid. |
| 25 | Aesthetic Enhancement at STP |
| 26 | OD275854/2025-2026:Supplying Polyalthila/Red palm including all charges etc complete. |
| 27 | OD275849/2025-2026:Construction of flowering beds of size -4m x0.5 m including all labour and material charges and as per the direction of departmental officers. |
| 28 | OD275850/2025-2026:Labour charge including land preparation, shifting of red soil, laying of carpet grass, manuring,irrigating etc complete |
| 29 | OD275851/2025-2026:Border construction using concrete blocks masonry including allmaterials cost and labour charges etc complete |
| 30 | OD275852/2025-2026:Supplying Red soil all charges including cost of material conveyance charges, etc complete. |
| 31 | OD275853/2025-2026:Supplying Manure including all charges |
| 32 | OD277151/2025-2026:Labour charge for digging pits, planting,manuring,watering,shifting the red soil etc |
| 33 | OD286970/2025-2026:Supplying carpet grass (common capert grass)including all charges |
| 34 | Setup of a microbiology analysis lab equipment inside 5x5m size room and Office Setup 5x5m size romm inside STP including vehicle shed, MS ladder, computer & printers, office furnitures, CC TV instalation etc |
| 35 | OD236144/2025-2026:BOD INCUBATOR - Inner chamber with rounded corners . Shelves 2nos adjustable made of stainless steel wire mesh. Inner door frameless-made of tempered safety glass . Inner SS304 grade and outer MS powder coated , Chamber illumination with flluorescent light(s) , Capacity- 50L . Internal dimension ? 300 x300 x 485 , Temperature Range 5 to 70 ºC . Voltage:230V, Frequency : 50Hz , Digital PID temperature controller with timer alarms and auto tuning , Over temperature Safety Protection . CE Certified . Double walled with PUF insulation . Accuracy ± 0.5 ºC . NABL Calibration certificate to be provided. |
| 36 | OD273227/2025-2026:BIOSATETY CABINET CLASS II TYPE A2 - (4x2x2 ft) - Userinterface: Basic model with manual interface Airflow Pattern: 70%recirculation and 30% exhaust Working area dimensions: 1235 x 600x650 mm (4x2x2 ft) Type: Vertical - Specifications : Should haveNominal Inflow velocity of 100 ± l0 fpm (0.5 m/sec) across thework access opening , Should have Nominal Down flow velocity of 60± 10 fpm (0.3 m/sec) , Inner Work station should be made ofAISl grade Stainless Steel 304 at 4\\" from the ULPA grill interiorand removable, seamless work surface with lift out knobs , Providedwith 2.5 ft stand with level adjuster , They should have seamlessdesign and should be rust and corrosion free and easy to clean includingcorners , Should have Glare free florescent and UV light (254nm) ,Should be provided with a Magnahelic Guage for Pressure Monitoring- Digital , Intrinsically safe negative pressure with regulated airflowsystem where the unit starts only when negative pressure is developed ,Exterior Make : Microbiological Resistant powder coated Mild SteelSheet , Provided with Vacuums petcock - 1 no , Intrinsically safe withnegative pressure , HFPA Filter - Factory tested and rated with anefficiency of 99.9995% in removal of particle 0.1- 0.2 micron &larger leak free , UPLA exhaust - 0.12 micrometer with an efficiencyof 99.9995% (UPLA filter) , UPLA Filter grill – SS 304 dulyperforated and polished , Fully closing, clear Toughened Glass (Safetyglass) with sash handle and adjustable to any height withcounterbalance , Curved stainless steel inlet Grill with SecondaryAirflow slots , Power supply consumption: 230V, 50Hz,580watts ,provided with 16 amps three pin plug-in for power , Should Meet ISOand CE standards , Should provide NABL Calibration certificate ,IQ,OQ, PQ , Local service setup , The proposed site is not subjected toany major modifications hence the unit needs to be reassembled with allcomponents at site along with the calibration , Should provide ElectricLoop sterilizer , Hard copy of instruction manual with Specificationsdetails , Cleanliness class ISO Standard 146441 ISO class 3 , Soundlevel less than 50 db at 1 meter from the face of the filter, Fan 1 motor– 900cfm of Air at a filter pressure drop from 0.25 to 0.75 inW.G at 90 fpm {0.45m/s} – Safety Features: Should have DoorCounterbalanced with Double string made with stainless Steel for extrasupport , Sash height indicating alarm for user safety when the sashgoes above the working limit. |
| 37 | OD273251/2025-2026:Autoclave Single Lever FullyAutomatic -Top Loading, Ch./Eff. Vol: 91 / 75 Lit, Usable Inner Dimensions: 400x600 mm,Model: #7440SLEFA, Make: EQUITRON,with IQ, OQ, PQ and NABL Certificate |
| 38 | OD273265/2025-2026:Labovision LED Binocular Compound Microscope , Model: C2Stand- Stable & sturdy C shaped stand withwell-contoured modular base, corrosionresistant paint.Viewing Head- Binocular inclined tube,inclined at 45o rotatable through 360' withIPD 55-75 mm and Dioptric adjustment. Antifungus treatedEyepieces- Wide Field eyepiece WFlOx/l8mm paired.Nosepiece- Low friction & fully ParfocalQuadruple Reversed nosepiece (Ball bearingtvpe).Objectives- BJ series DIN Semi PlanAchromatic, Anti fungus treated objectives:4x/0.10,10x10.254Ox(SL)/0.65, I 00x(SL, Oilyl.25Stage- Double layer graduated mechanicalrectangular stage size 142 x 133mmcross travel 76 (X) x 54 (Y) mm on ball bearingco-axial controls spring clip specimen holderFocusing Module-COAXIAL coarse & finefocusing mechanism, with tension control ring.Ergonomically designed for easy grip, esp.for tension control.Condensor- Moveable ABBE Condenser, NA 1.25 with aspheric lens & Iris diaphragmIlluminationSuper Bright LED 3W with intensity controlregulator.Power-Power Input 220V AC.Standard AccessoriesPacked in Moulded Styrofoam box with:Immersion oilOperation ManualCleaning ClothDust cover |
| 39 | OD275874/2025-2026:Supplying and Installing LABORATORY REFRIGERATOR-1 Microprocessor based controller Frost free Refrigerant: CFC- Free LED Control panel and Alarm status Door with Key lock . Capacity – 250 - 285Litre . Temperature Range: 2 - 8 C with temperature controller .Digital temperature display Accuracy: ±10C .Inner SS304 grade and outer MS powder coated |
| 40 | OD236147/2025-2026:Supply of 10 HP portable submersible sludge pump, 3-phase, suitable for handling slurry and sewage, maximum head up to 20 meters, solid handling capacity up to 50 mm, abrasion-resistant impeller, thermal protection, 15 m power cable, and 30 meters of heavy-duty discharge hose (100 mm dia) with quick couplings. |
| 41 | OD273274/2025-2026:Supply of Beaker Graduated -250 ml |
| 42 | OD273279/2025-2026:Supply of Beaker Graduated -1000 ml |
| 43 | OD273308/2025-2026:Supply of Beaker Graduated -100 ml |
| 44 | OD273349/2025-2026:Supply of Beaker Graduated -500 ml |
| 45 | OD273351/2025-2026:Supply of Conical flask with Screw Cap -500 ml |
| 46 | OD273356/2025-2026:Supply of Conical flask with Screw Cap -250 ml |
| 47 | OD273360/2025-2026:Supply of Conical flask with Screw Cap -100 ml |
| 48 | OD275178/2025-2026:Supply of Conical Flask With Stopper -1000 ml |
| 49 | OD273361/2025-2026:Supply of reagent Bottle with Screw Cap -1000 ml |
| 50 | OD273363/2025-2026:Supply of reagent Bottle With Screw Cap -500ml |
| 51 | OD273373/2025-2026:Supply of reagent Bottle With Screw Cap -250ml |
| 52 | OD273485/2025-2026:Fixed vol. Micropipette Variable single channel fully auto.10000 ul |
| 53 | OD273494/2025-2026:Petridish 80 mm dia 15 mm height |
| 54 | OD274213/2025-2026:Sample Bottle - Reagent Bottle - 250 ml |
| 55 | OD274215/2025-2026:Measuring jar (A Class) - 100ml (Cylinders |
| 56 | OD274216/2025-2026:Measuring jar (A Class) - 1000 ml |
| 57 | OD274221/2025-2026:Measuring jar (A Class) - 500 ml |
| 58 | OD274227/2025-2026:Supply of Measuring jar (A Class) - 250 ml |
| 59 | OD275602/2025-2026:Fixed vol. Micropipette Variable single channel fully auto.10000 ul |
| 60 | OD274235/2025-2026:Supply of Test Tubes 10 ml |
| 61 | OD274389/2025-2026:Supply of Glass Slide |
| 62 | OD274380/2025-2026:Supply of Test Tubes 25 ml |
| 63 | OD275610/2025-2026:Supply of Innoculation Needle |
| 64 | OD275324/2025-2026:Graduated Pipette (A Class) - 1 ml |
| 65 | OD275345/2025-2026:Graduated Pipette (A Class) (Serological) - 10 ml |
| 66 | OD275219/2025-2026:Supply of Test tube rack (15 mm x 18 tubes |
| 67 | OD275757/2025-2026:Supply of Glass rod |
| 68 | OD275748/2025-2026:Supply of Forceps With Round Tip 8 inch |
| 69 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 70 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 71 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 72 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 73 | 5.22.5:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wire fabric |
| 74 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 75 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 76 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 77 | 26.19.1:Providing at all heights, levels and locations Aluminium profile industrialtroughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS2676. The sheet shall be fixed using self drilling/self tapping SS screws of size5.5x65 mm with EPDM seal complete upto required pitch in horizontal, verticalor curved surfaces i/c cutting to size and shape where required as perspecifications, detail drawings and direction of Engineer-in-Charge. The rateshall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery forfixing and approved sealent where required etc. but excluding the cost ofpurlins, rafters and trusses.0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm. |
| 78 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . |
| 79 | 14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . |
| 80 | OD275016/2025-2026:L Shaped Executive TableMain Table Size : 1gOcm x 90cm x 75cmSide Tabte : 90cm x 45 Cmx 75 cmMain Table Having One Drawerand One CupboardKeyboard and Footrest.Sde Table Having One DrawerAnd Keyboard with CpU provisionEdges Are Ctipped with pVC.SStypeHandles ,Lock and Key provision |
| 81 | OD275026/2025-2026:Cushion ChairExecutive Cushion ChairSeat and Back Cushioned withHydraulic System |
| 82 | OD275079/2025-2026:Visitors ChairCushioned Seat and Netted Back |
| 83 | OD275089/2025-2026:Office CabinetParticle. Board Cabinet ofSize : 180cm H X 90cm W X45cm DWith 4shelves.Lock and Keyprovision with SSType Handles |
| 84 | OD276571/2025-2026:Supplying and fixing 1.5 Ton 5 Star Inverter AC |
| 85 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 86 | OD276670/2025-2026:Supply and Installation of 5MP camera 2 no with motion sensor and 30m vision., 5MP orHigher HD out DVR,1TB HDD 4G Router Cable 100m ( maximum) ,Rack, UPS, 500VAincluding charges for wiring, the addition of necessary protection devices (against Rain, dust,lightning) 3yr product warranty plus on-site service. |
| 87 | OD276767/2025-2026:Intel core 15 processor, motherrboard h81/110g giga NVME, AOC monitor 22\\", FA100 256GB NVME Gen3 SSD, LPX8GB (1x8GB) DDR4 3200MHZ C16, Desktop RAM, KEyboard and mouse, SMPS , Windows orginal free and one year replacement warranty.- |
| 88 | OD276773/2025-2026:Supplying and installing Canon g3010 printer black and white with scanner . |
| 89 | OD280529/2025-2026:Supplying and installing RO water purifier including all charges etc. complete |
| 90 | Manhole constuction and screen fixing |
| 91 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 92 | OD280746/2025-2026:Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m for 2nd depth of 1.50m to 3.0m in all kinds of soil. |
| 93 | 100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals. |
| 94 | 2.17.1:Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered).Depth not exceeding 1.5 m |
| 95 | 2.17.2:Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m |
| 96 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 97 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 98 | OD280867/2025-2026:Centering and shuttering including strutting propping etc and removal for Cover slab(circular) |
| 99 | OD280869/2025-2026:Centering and shuttering including strutting, propping etc and removal of form etc forWell steining - circular work |
| 100 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 101 | 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources) |
| 102 | 5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars |
| 103 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 104 | 19.16:Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design |
| 105 | OD280916/2025-2026:Conveying from casting yard and fixing the RCC cover slab of size 1.60 M dia,18 cm thickincluding cost of 5 Kg cement/E |
| 106 | OD280919/2025-2026:Supplying and fixing in position 560 mm dia. CI Cover (heavy duty-HD 20) with frame as perIS 1726-1991 |
| 107 | OD280923/2025-2026:Provision for replacing and rectificationm of damaged pipe, cables and other utilities. |
| 108 | OD282065/2025-2026:Providing and fixing S.S Screen with vertical bar spacing 5mm infront of inlet chamber of STP, including all materrial and labour charges etc. complete, as per the direction of departmental officers. Please Enable Macros to View BoQ information |
