|
| 1 | Table Dressing Gents with Mirror - Dismantling/replacement of old U/S drawers of Table dressing gents and fixing of new drawers of pre-laminated MDF board of 18mm type-II Grade-I duly fixed with knob and 4mm thick TW beeding & beeding shall be French polished to required finish all as per drg and directed (DB-3980, FD-230,379) |
| 2 | Dismantling/replacement of old U/S top (size 900x300x150mm ) of Table dressing gents and fixing of new top of pre-laminated MDF board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding & beeding shall be French polished to required finish complete all as per drg and directed (FD-230,379) :- |
| 3 | Dismantling/replacement of old U/S bottom (size 900x300x150mm ) of Table dressing gents and fixing of new bottom of pre-laminated MDF board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding where required & beeding shall be French polished to required finish complete all as per drg and directed (FD-230,379) : |
| 4 | Dismantling/replacement of old U/S sides and middle partitions (size 300x150mm ) of Table dressing gents and fixing of new sides and middle partitions of pre-laminated MDF board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding where required & beeding shall be French polished to required finish complete all as per drg and directed (FD-230,379) : |
| 5 | Fixing/Fitting of loose/dismantaled table dressing gents to the wall with 3\\" & 1.5\\" Screw.directed |
| 6 | Taking down carefully unserviceable complete mirror and S&F new mirror and of size 380mm x 760mm x 5.0mm thick complete all around beeding and back made out of 6mm thicck commercial ply including 2 nos of key plate all as shown on drg, and directed |
| 7 | Table writing cadets steel (TP) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed.(a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 8 | (b) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL |
| 9 | (d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty of Table writing cadets steel |
| 10 | (e)Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete . |
| 11 | (g) PVC shoe |
| 12 | Rack shoe cadets steel (TP) Repair/Welding of shoe rack at broken locations and of dislocated parts of tubular steel sections at required places : Welding shall be max 1 inch. If more length reqd additional point to be considered. |
| 13 | Dismantling of unsv bend steel rod of shoe Rack steel cadet and replacement of 10mm square bar of approx. length 900mm duly welded in reqd places and applying one coat of red oxide & two coat of black SE paint complete all as directed |
| 14 | Sofa set five seater(FD-281/ FD-373/ FD-258)- Removing old unserviceable cushion with cover complete and S&F new cushions with tapestry cloth cover (rates of cloth not less than 350 Rs per Mtr)duly stitched with all side except one side stiched with first qualitZip for easy open /close. Make of cushion Sleepwell/ Feather Foam /godrej ( Set of sofa set five seater means set of 10 cushions with cover). |
| 15 | Sofa two seater (TP) - Removing old unserviceable cushion with tapestry/leatherite cover complete and S&F new cushions 75mm 32 Density with approved tapestry/leatherite cloth cover (rates of cloth not less than 350 Rs per Mtr)with pasting/staple/stitch on all side front/back/side . Make of cushion Sleepwell/ Feather Foam / Godrej .Rest allas per directed |
| 16 | Pool table with seat and back : S/F new seat duly made up of 50 mm cushion 40 D covered with leatherite fabric pasted onBWR PLY 12 mm BWR ply of size 8 ft x 1.5 ft |
| 17 | Pool table with seat and back : Removinf old U/S cane and S/F New back duly made up of 50 mm cushion 40 D covered with leatherite fabric pasted on BWR PLY 12 mm BWR ply of size 2.5 ft x .75 ft |
| 18 | Almirah large/Med steel with or without shelves Steel cupboard for cadet multipurpose:-(FD-114, 1033, 1031 1032, CWE/PNA/SK/ 3196)-Replacement of old unserviceable lock and providing & fixing new lock of good quality with double key of standard quality |
| 19 | Ditto all as per item No.18 above but Replacement of old broken handle and providing new MS CP handle of standard size 150mm of Godrej quality matching to Godrej model. |
| 20 | Ditto all as per item No.18 above but Replacement unsv hanging rod 20mm SS-530mm long. |
| 21 | (g) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. |
| 22 | Ditto all as per item No.18 above but Replacement of old broken hinges and providing new MS 75mm hinges duly welded. |
| 23 | Ditto all as per item No.18 above but Replacement of unserviceable shelf clips as per sample existing. |
| 24 | Bed cadet steel(CWE/2000/1 ):- Repair to bed by welding and replacement of U/S nut bolts at required places of dislocated parts as required. |
| 25 | Removing old U/s shoes and S/f new rubber shoes |
| 26 | Removing old U/s ply and s/f new Ply BWR 12 mm of Size1920 mm x 900 mm |
| 27 | Chair Dining cadet steel(CWE/2000/1Sheet 4/6) -Taking down carefully old unserviceable Seat of chair dining cadet steel and S&F new Seat of chair dining cadet steel . |
| 28 | Taking down carefully old unserviceable back of chair dining cadet steel and S&F new backt of chair dining cadet steel (CWE/2000/1Sheet 4/6) |
| 29 | Removing old U/s shoes and S/f new rubber shoes |
| 30 | Repair of chair dining cadet steel (CWE/2000/1Sheet 4/6) :-by welding of dislocated parts of tubular steel sections at required palces |
| 31 | Chair writing cadets (CH-07/CHR-07/FD 75)Replacement of old unserviceable seats of chair tubular steel with arm duly canned |
| 32 | Replacement of old unserviceable back of chair tubular steel with arm duly canned |
| 33 | Replacement of old unserviceable arm rest (plastic) of chair tubular steel with arm |
| 34 | S & F Screw with plate washer for seat & back for chair writing for cadet of Godrej (CH-07 /FD 75) as per manufacturers description. |
| 35 | Chair easy cadets steel -Dismantling old unsv nut & bolt and replacing new nuts and bolts of chair easy cadet steel complete all as directed(Sketch 'Q' Godrej) & (Sketch 'R' Godrej) |
| 36 | Repair of chair Easy cadet steel by welding of dislocated parts of tubular steel sections at required palces |
| 37 | Teapoy cadets steel -Dismantling old unsv nut & bolt and replacing new nuts and bolts of Teapoy cadet steel complete all as directed (Sketch 'Q' Godrej) & (Sketch 'R' Godrej) |
| 38 | Rostrum(CWE/PNA/2001 Sheet 3, GE(K) F 122/85)- Taking down Carefully old unserviceable wheels and S&F new wheels with nut and bolts to Rostrum |
| 39 | Taking down Carefully old unserviceable drawers and channels S&F new drwers and channels to Rostrum (CWE/PNA/2001 Sheet 3, GE(K) F 122/85) |
| 40 | M&L for preparation of old polished wooden surfaces by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coats polish with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying two coats of the polish sparingly but uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for the following items:-Almirah medium wooden with shelves (inside & outside) (DB/3959). |
| 41 | Ditto all as per item No.40 above but Board notice. (CAD/FW-104, M/FW-5, CAD FW-22,F-78, CAD FW-15) |
| 42 | Ditto all as per item No.40 above but Chair Dining long back with velvet cloth. (Spl TP) |
| 43 | Ditto all as per item No.40 above but Chair Easy Aminity. (CAD/FW-4) |
| 44 | Ditto all as per item No 40 above but Glass show case 6 ’ Long x 2 ’6 ” wide x 4 ’6 ” High with green Baize |
| 45 | Ditto all as per item No.40 above but Hat Stand with mirror. (DB/3978) |
| 46 | Ditto all as per item No.40 above but Rostrum. (CWE/PNA/2001 Sheet 3, GE(K) F 122/85) |
| 47 | Ditto all as per item No.40 above but Show case double. (GE(K)-6/59) |
| 48 | Ditto all as per item No.40 above but Show case for single Museum. (GE(K)-9/54) |
| 49 | Ditto all as per item No.40 above but Teapoy wooden. (FD-232, 278, 382) |
| 50 | Ditto all as per item No.40 above but Table Centre. (FD-274) |
| 51 | Ditto all as per item No.40 above but Table for medals 4’x 3’x2’6”. (NTS/FW-3) |
| 52 | Ditto all as per item No.40 above but Table dressing gents with mirror. (FD/379/DB) |
| 53 | Ditto all as per item No.40 above but Table dining 6’1”x3’6”.(STAFW-16) |
| 54 | Ditto all as per item No.40 above but Double bed VIP of Guest room |
| 55 | Ditto all as per item No.40 above but Sofa five seat TP (Ornamental)) |
| 56 | Ditto all as per item No.40 above but spl Dining table with six chair VIP |
| 57 | Ditto all as per item No.40 above but Pool table with seat and back size 8 ft x 2 ft x 4 ft. |
| 58 | M&L for scrapping of old polish from Sofa set 5 Seater with scrapping machien after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of polish made out of lakhdana and spirit with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying uniformly over the entire area to give an even surface having uniform texture and high gloss as directed for Sofa set five seater FD 281 |
| 59 | M&L for preparation of old polished wooden platform by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of melamine with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying melamine uniformly over the entire area to give an even surface having uniform texture and high gloss as directed for Platform teak wood 6'-6”x9’x9”(CAD/FW-34) |
| 60 | M&L for painting one coat of synthetic enamel paint on old steel/wooden surface duly preparing the surface after removing rust, dust etc. by sand paper etc & applting OG/smoke grey / PO red / signal red / black / Pale cream colour shade paint complete all as directed for the following items:-Chair dining cadet steel (CWE/2000/1Sheet 4/6) |
| 61 | Ditto all as per item No 60 above but Rack steel 1830x 760x1905mm. (FD-126(M) |
| 62 | Ditto all as per item No 60 above but Table dining cadet steel. (CWE/2000/1 Sheet No 4/6) |
| 63 | Ditto all as per item No 60 above but shoe rack cadet steel. (CWE/2000/1 Sheet No 4/6) |
| 64 | Ditto all as per item No 60 above but Steel cupboard for multipurpose cadet (inside and outside). (CWE/PNA/ 396) |
| 65 | Ditto all as per item No 60 above but Steel stand for Coat Hanger for 16 hooks, 32 hooks, 28 hooks, 60 hooks. (CM/FW-5) |
| 66 | Ditto all as per item No 60 above but Rack iron for cycle:- (GE(K) F/88/97)10 Cycles |
| 67 | Ditto all as per item No 60 above but Rack iron for cycle:- (GE(K) F/88/97) 5 Cycles |
| 68 | Ditto all as per item No 60 above but Bed Cadet steel (Sketch-P (Godrej)) |
| 69 | Ditto all as per item No 60 above but Chair Writing cadet of seat & back frames and handle (CHR-07) |
| 70 | Ditto all as per item No 60 above but table writing cadets |
| 71 | Ditto all as per item No 60 above but Teapoy steel |
| 72 | Ditto all as per item No 60 above but Book case wooden |
| 73 | Ditto all as per item No 60 above but Chair easy steel cadet. (Sketch-Q) Please Enable Macros to View BoQ information |
