|
| 1 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry build in cement mortar including all quions/archers etc completed all as specified and directed. |
| 3 | M&L for precast cement concrete (1:3:6) type C-1 (using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:4 complete in wall complete all as specified and directed. |
| 4 | Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 5 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed. |
| 6 | Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed. |
| 7 | S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work etc complete all as specified and directed. |
| 8 | M&L for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed. |
| 9 | M&L for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed. |
| 10 | M&L for wrought second class hard-wood in scantlings in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and directed |
| 11 | M&L for PCC type B1 (1:2:4) (Using 20mm graded stone aggregate) in window or cills, lintels, copings, pier caps, columns, posts, boundary pillars set in cement mortar (1:4) complete all as specified and directed |
| 12 | M&L for double charged vitrified coloured tiles light shade 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed with colour cement, laid over and including 15mm thick bedding layer in cement mortar 1:6, complete all as specified & directed. |
| 13 | Ditto all as per item No 12 above but in skirting/vertical surface and including 10mm thick bedding layer in cement mortar 1:4, complete all as specified & directed. etc complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment from wall/ chajja/ roof projection surface by scrapping (nails, screws if any to be removed properly before scraping) to make the surface free from dust, loose paint and loose plaster to be completely removed by manually/mechnically means as directed and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with Excellent Dirt Pick up resistance with diluted with water as per manufacturer instructions applied over one coat of Smartcare Damp Prime Suprema Primer vertical walls with dilution of not more than 10% with forced coverage not more than 5 Sqm / Ltr as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed .Note-Rates quoted are deemed to inclusive of make arrangement of crane, lifter, safety precaution, scaffolding and rope manila of 60 feet height etc |
| 15 | M&L for preparation of old surfaces (plastered or unplastered) of walls/ chajja/ roof projection surface by scrapping with manually as directed and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste good smoothen surface by sand paper and applying one coats of premium acrylic smooth exterior emulsion of approved colour and including necessary scaffolding at any height complete all as specified and directed..Note-Rates quoted are deemed to inclusive of make arrangement of crane, lifter, safety precaution, scaffolding and rope manila of 60 feet height etc |
| 16 | M&L for preparing surfaces of old roof tiles ( manglore tiles/taylor tiles) tiles of pattern as specified and applying one coat of water based exterior paint approved make (Berger : All guard or equivalent) all as specified and directed.Note: (i) Area measured flat, no addition shall be made for corrugations, offsets, etc(ii) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment required |
| 17 | M&L for complete removal of existing treatment on wall to make the surface from dust, loose paint and loose plaster by scrapping manually as directed (nails, screws if any to be removed properly before scraping) complete all as specified and directed. |
| 18 | Ditto all as per item No 17 above but for ceiling surface complete all as specified and as directed. |
| 19 | M&L for providing and applying water proof cement base putty of 2mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 20 | Ditto all as per item No 19 above but for ceiling surface complete all as specified and as directed. |
| 21 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed. |
| 22 | Ditto all as per item No 21 above but for ceiling surface complete all as specified and as directed. |
| 23 | M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.Note-Rates quoted are deemed to inclusive of make arrangement of crane, lifter, safety precaution, scaffolding and rope manila of 60 feet height etc |
| 24 | Ditto all as per item No 23 above but for ceiling surface complete all as specified and as directed. |
| 25 | M&L for applying two coats of plastic emulsion paint on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying plastic emulsion shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note for item No.14 to 26 : (a) Stage for Preparation of surfaces shall be got approved from GE before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator.(c) The contractor shall submit MoU on non judicial stamp paper of Rs 500/- with any manufacturer of exterior emulsion paint listed in particular specification/list of manufacturer from which the contractor proposes to carry out the above work.(d) Copy of MoU shall be uploaded with T-Bid (cover-1) failing which the technical bid shall be disqualified/rejected |
| 26 | Ditto all as per item No 25 above but for ceiling surface complete all as specified and as directed. |
| 27 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. Note-Rates quoted are deemed to inclusive of make arrangement of crane, lifter, safety precaution, scaffolding and rope manila of 60 feet height etc for all items considered in the schedule |
| 28 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. |
| 29 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint of Aluminium paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. |
| 30 | M&L for complete removing the old paint/thermoplastic paint/markings over concrete / bituminuos surfaces by paint removers or burning off by blow lamps or scrapping with tools and cleaning with scrapers any number of coats, any width or girth and cleaning the surface as to receive new markings/painting and providing through special applicator machine, auto retro-reflective thermoplastic road making paint in yellow/white, pattern of specified strip, 2.00 mm thick and 100 mm wide, centre line, stop line dashes arrow, brackets similar work on bituminous / cement concrete road surfaces as per IRC pattern incuding cleaning of road surface free from dust & moisture and putting in duly mixed with 8% nuca sign special applicatore machine complete all as specified and as directed. |
| 31 | M&L for Preparing New/Old existing painted concrete / bituminuos surfaces (road, runway, dispersal) and painting lines, dashes , letter etc not exceeding 10cm wide with one coat water based paint road marking materials all as per MORTH Specifications, white or golden yellow, orange/red with using road painting/marking machine all as specified and directed . |
| 32 | Demolition of kerb stone/boulder masonry,precast articales fixed on compound wall pillar laid dry or in cement mortar all as specified and directed |
| 33 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 34 | M&L for preparing new concrete surfaces , stone , kerb stone surfaces of any description not otherwise over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink /white primer complete all as specified and directed |
| 35 | M&L for cleaning of external stone surfaces of walls at any height by applying one coat of Sagatech S.C. solution (Saga polymers) or similar cleaning solution of Dr fixit/pidilite or other reputed brand as appreoved by users) @ 3ltr/sqm or as per manufactures instruction. After thoroughly cleaning the surface the loose masonry joints to be properly pointed with (1:3) cement sand mortar mixed with WPC complete all as specified and as directed Please Enable Macros to View BoQ information |
| 36 | M&L for cleaning of external stone surfaces of walls at any height by applying one coat of Sagatech S.C. solution (Saga polymers) or similar cleaning solution of Dr fixit/pidilite or other reputed brand as appreoved by users) @ 3ltr/sqm or as per manufactures instruction. After thoroughly cleaning the surface the loose masonry joints to be properly pointed with (1:3) cement sand mortar mixed with WPC complete all as specified and as directed Please Enable Macros to View BoQ information |
