Name of Work:- Annual Plan-KADUNGALLOOR GP 2025-26 ED AADAM ROAD PALARATHURUTH ROAD RETARRING - CHETHRAPPILLY KARINGANAMKODATH ROAD RENOVATION WARD 15-KDLR 394/2025-26-General Civil Work
Sl. No.
Item Description
1
CHETHRAPPILLY KARINGANAMKODATH ROAD RETILING
2
4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material
3
OD481854/2025-2026:Taking out existing CC interlocking paver blocks from footpath/ central verge, includingremoval of rubbish etc., disposal of unserviceable material to the dumping ground, for whichpayment shall be made separately and stacking of serviceable material within 50 metre lead asper direction of Engineer-in-Charge.
4
OD481856/2025-2026:Providing and laying interlocking concrete block pavements using 80mm M40 hydraulic blocks of approved size, design and shape, laid in required pattern over and including a compacted bed of 6mm stone aggregate of 50mm average thickness etc complete as per the direction of Engineer-in-charge
5
75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification(i) Nominal mix (1:2:4)
6
OD466479/2025-2026:Providing and laying of Interlocking Concrete block pavements using 80mm M40 gradeDepartmental paverblocks , laid in required pattern over and including a compactedbed of 6mm stone aggregate of 50mm average thickness, etc. all complete as per the directionof Engineer in charge
7
Palarathuruth Road
8
75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
9
75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
10
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
