Name of Work:- RESURFACING OF BITUMINOUS ROAD OF LOHARAMAU MARG BHOOMI VIKAS EVAM GRAHSTHAN YOJNA, SULTANPUR.
Sl. No.
Item Description
1
Scarifying the existing bituminous road surface to a depth of 50 mm by mechanical means and disposal of scarified material with in all lifts and lead upto 1000 metres.(MORT&H S.I. No. 305.4.3)
2
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (plant mix method) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRTH specification clause No. 406 complete in all respects.Laying Using Mechanical Paver (MORT&H S.I. No. 406 ) AR
3
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of roads surface and spraying primer @ 0.60 Kg/SqM using machanical means. (MORT&H) SPECIFICATION N0 502
4
Providing and laying 40mm bituminous macadem with 100-120 TPH Hot mix plant producing an average output of 75 tones per hours using crused aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clauses 501.6 and 501.70 to achieve the desired compaction (MORT&H) SPECIFICATION N0 504
5
Providing and applying tack coat with bitumen using pressure destributor @ 0.25 Kg/SqM on the prepared bituminous/granular surface cleaned with machanical broom. (MORT&H) SPECIFICATION N0 503
6
Providing& laying 25mm semi-dense bituminous concrete with 100-120 TPH batch type HMP producing as avarage output of 75 tonne per hour using crushed agreegate of specified grading premixed with bituminious binder @ 4.5 to 5.0 % of mix and filler, transporting the hot mix the one site] laying with hydrostatic or finisheer with sensor control to the required grade, lavel alignment, rolling with a smooth wheeled, vibratory and tandom roller to achive the desire specification as per MORT&H SPECIFICATION clause 508. complete in all respect.(MORT&H SPECIFICATION N0 504) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
