|
| 1 | Improvement works with allied Civil works |
| 2 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting . |
| 3 | Supply and fixing in position of best Indian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 4 | Suppling and fixing hand wash basin of 550 x 400 mm size with all accessories such as Cast iron Brackets ,32 mm dia CP wash coupling , rubber plug and chain ,32 mm dia 'B' class waste pipe ,15 mm dia GM wheel valve ,15 mm dia Nylon connection ,15 mm dia Brass Nipples, 15 mm CP pillar Tap etc., white with pedastal, cost of all materials , labour charges for fixing ,cost of furniture fittings as per the instruction of site engineers,including cost of all material, labour, lead, lift, etc., complete. |
| 5 | Supplying, aligning and fixing of 110 mm PVC waste water line (6 KG/Sq.cm) with necessary specials including including cost of all materials , labour, T & Ps ,lead, lift, etc, complete above ground level. |
| 6 | Supplying, aligning and fixing of 90 mm PVC waste water line (6 KG/Sq.cm) with necessary specials including including cost of all materials , labour, T & Ps ,lead, lift, etc, complete above ground level. |
| 7 | Supplying and fixing 25mm Dia CPVC pipes 10 kg/cm2 for water supply to toilet rooms, wash basin etc, including cost of all materials, cost of specials, labour charges for fixing in wall wherever necessary according to site conditions and as per the instruction of site Engineer ,lead and lift etc, complete. |
| 8 | Removing and refixing 25mm CPVC pipes and fittings 10 kg/cm2 for water supply to toilet rooms, wash basin etc, including cost of all materials, cost of specials, labour charges for fixing in wall wherever necessary according to site conditions and as per the instruction of site Engineer ,lead and lift etc, complete. |
| 9 | Supplying and fixing of PVC Screw Down Tap Heavy Type 15mm dia, labour charges for fixing ,lead &lift etc, complete. |
| 10 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 11 | Supplying and fixing Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top,lock and bottom rails .The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm . The over all size of top rail,lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.Solid panel PVC door with frame.PVC Door 0.75x2.10 m including cost of all material, labour, lead, lift, etc., complete. 0.8 x 2.0 mtr. |
| 12 | Supply and fixing in position of powder coated colour aluminum frame single leaf door using outer frame 101.6 x 44.45 x 2.10 mm @ 1.608 Kg/M and door inner frame side and vertical 53.70 x 44.4 5 x 2.30mm @ 1.238 Kg/M, door bottom frame 47.62 x 44.45 x 2.17 mm @ 1.02 kg/m glazing clips of 17.30 x 19 x 0.6mm @ 0.083 Kg/m, rubber beedings hinges, handle, Hydralic floor spring ,automatic door closer etc, and with 3mm to 6mm thick. ACP sheet for top & bottom portion including cost of all materials, lead, lift, etc., complete.Single leaf door .9 x 2.10 m. |
| 13 | Fabricating Supplying and fixing in position of Aluminium anodised with powder coated aluminium frame with prelaminated board. The Outer frame: 101.6 x 44.45 x 2.10 mm @ 1.60 kg/m with 3mm tk. ACP sheet for top & bottom portion, neccessary aluminium clips of size 17.27x17.15 x 1.50 mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification 1868/1962 and should be got approved by Departmental Engineer before use. |
| 14 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End. |
| 15 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point ( 8 points / Coil) Lower End. |
| 16 | Supply and fixing of 20 W 4'-0\\" LED Fitting with bulb complete with TW round block on wall or ceiling and PVC unsheathed copper leads from terminal to the fitting including cost of all material, labour, lead, lift, etc., complete. |
| 17 | Supply and fixing of 450mm (18\\") sweep (light duty) AC exhaust fan complete with out provision of hole in the wall [SD.119] |
| 18 | Supply and fixing of 9W LED bulb with angle holder and PVC round blocks on wall or ceiling including cost of all material, labour, lead, lift, etc., complete. |
| 19 | Supplying & fixing Pin headed/Rouged glass 3mm thick for replacement of damaged ventilator glasses including the cost of all materials, labour, lead,lift, T&P etc complete. |
| 20 | Supplying and fixing PVC/Fibre Glass framed 5.5mm thick mirror, shelf type with Hard Board Backing. Size 600mm x 450 mm including cost of all material, labour, lead, lift, etc., complete. |
| 21 | Providing two legged scaffolding using 15 m blue composter causrino posts or best quality bamboo posts of 4m overall length (3.0m height +0.5m projection + 0.5 m into the ground) the distance between the two rows with horizontal posts with 0.50 m over tab on either side and places @ 2m c/c including longitudinal and transverse middle places to setup and providing a platform with country wood planks of 40 mm tk 1m wide etc complete from using coil and nails 1m run. |
| 22 | Painting two coats with ready mix plastic emulsion of first class quality paint and approved colour over a priming coat including through scrubbing clean removal of dirt etc, complete and including necessary plaster of Paris, petty, wherever required - 10sqm |
| 23 | Supplying and Fixing of Terracotta jally inclusive of all materials, lead and lift etc., complete. As per the approved quality of site engineer. |
| 24 | Painting all exposed faces of wooden ventilator frames with enamel paint over one coat of primary coat including cost of all materials, lead, lift etc complete. |
| 25 | GST fo bidders within Tamilnadu. Heading |
| 26 | GST fo bidders within Tamilnadu. Heading |
| 27 | IGST Please Enable Macros to View BoQ information |
