|
| 1 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and directed. |
| 2 | Hardcore of gauge exceeding 63 but not exceeding 150mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 3 | 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate for flooring, paving sub base, path etc and finished even and fair complete all as specified and directed. |
| 4 | PCC 1:2:4 B1 (20mm graded aggregate) 75mm thick for hardstanding, etc all as specified and directed. |
| 5 | Glass dividing strips of width of 38mm and 3mm thick inserted in postion in concrerte flooring all as specified and directed. |
| 6 | Sand filing under floors or in foundations including watering and consolidation for 50mm thick all as specified and directed. |
| 7 | Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 8 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.50M in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed. |
| 9 | PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed. |
| 10 | Pre-cast cement concrete block masonary with solid blocks, type C1, 1:3:6, 20 mm graded aggregate, exceeding 10 cm in width and setting in mortar, in cement mortar 1:4 complete all as specified and as directed. |
| 11 | Demolition of Brickwork, stone / boulder/ block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed |
| 12 | Rendering 10mm thick on fair faces of block wall surfaces in cement mortar 1:4 for even and smooth without using extra cement complete all as specified and directed. |
| 13 | Applying two coats of cement based paint, over a coat of alkali resistant primer on wall sufaces including preparation of newly plastered surfaces complete all as specified and as directed. |
| 14 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in Hard /dense soil complete all as specified and directed. |
| 15 | Removal of excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 16 | 75mm thick plain Cement concrete, 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection, hardstanding/ path and finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Excavating in post holes (or similar holes) each in hard /dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed |
| 18 | MS Steel work in tubular/ post/ trusses/ purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161-1979 graded St 240 all as specified and directed |
| 19 | Preparation of new steel/iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. |
| 20 | Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed. |
| 21 | Mild steel TMT bars 8mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed. |
| 22 | Providing Precast cement concrete Type B1 1:2:4, using 20mm graded stone aggregate in cover slabs and set in cement mortar 1:4 complete all as specified and directed. |
| 23 | Excavation over areas, not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and directed. |
| 24 | Excavation over areas, exceeding 1.5mtr but not exceeding 3.0mtr deep getting out in soft / loose soil all as specified and directed. |
| 25 | Reinforced concrete pipes, 150mm bore of class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 26 | Broken stone / boulders loose filling with aggregates of gauge 40 to 80 mm, spread and levelled complete all as specified and directed. |
| 27 | Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed. |
| 28 | Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 29 | Nominal mix M-20 (20mm graded stone aggregate) Type B1, 1:1.5:3 reinforced cement contrete for slabs supported on walls, beams and columns etc complete all as specified and directed. |
| 30 | Use and waste curved formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick column, beam etc (Horizontal or sloping) fair finished concrete surface all as specified and directed. |
| 31 | Use and waste curved of form work to edges of concrete flats, treads, breaks in floor, openings in concrete walls, floor and roof and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 20cm wide for fair finished concrete surface all as specified and directed. |
| 32 | Fixing cost for MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box all as specified and directed. |
| 33 | Trail bore of 250mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone / boulder etc. all as specified and directed. |
| 34 | Addditional cost for slotted pipe of 250mm dia in lieu of casing pipe of 250mm dia all as specified and directed. |
| 35 | Removing excavated surplus soil to a distance exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 36 | Taking up or down steel tubing and connections, bore of pipe 80 mm including cleaning for refixing or removal complete all as specified and directed. |
| 37 | Taking up or down steel tubing and connections, bore of pipe 50 mm including cleaning for refixing or removal complete all as specified and directed. |
| 38 | Taking up or down steel tubing and connections, bore of pipe 25 mm including cleaning for refixing or removal complete all as specified and directed. |
| 39 | Excavation in trenches not exceeding 1.50m deep and not exceeding 1.5m width in soft/ loose soil for taking out / laying of pipe line complete all as specified and as directed. |
| 40 | Supply and laying in trenches, walls, floors galvanised steel tubings of bore 80 mm dia medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps connection cutting screwing, drilling etc upto 100mm dia pipe all as specified and directed |
| 41 | Supply and laying in trenches, walls, floors galvanised steel tubings of bore 50 mm dia medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps connection cutting screwing, drilling etc upto 100mm dia pipe all as specified and directed |
| 42 | Supply and laying in trenches, walls, floors galvanised steel tubings of bore 25 mm dia medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps connection cutting screwing, drilling etc upto 100mm dia pipe all as specified and directed |
| 43 | Gunmetal, globe or gate valves 50mm dia with iron wheel head, screwed both ends for iron pipe all as specified and directed. |
| 44 | Gunmetal, globe or gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe all as specified and directed. |
| 45 | Costruction of valve pit chamber of size 1000mm x 1000 mm x 1000 mm (internal size) with 4 mm thick MS sheet cover and angle iron 50 x50 x6 mm thick fame embedded in 15 cm thick PCC coping with locking arrangement with two coats of synthetic enamel with internal external surfaces over a coat of red oxide primer including necessary excavation removal of surplus soil to a distance not exceding 50 mtr returning filling in PCC 1:3:6 type C2 75 mm thick as in foundation/ floor brick work (one brick thick) in cement mortars (1:4) PCC 1:3:6 type C1 in copping, Plastering in cm 1:4 and 75 mm thick hard core below foundation etc including dismantling valve pit chamber complete all as specified and directed. |
| 46 | Costruction of valve pit chamber of size 600mm x600 mm x600 mm (internal size) with 3.15 mm thick MS sheet cover and angle iron 50 x50 x6 mm thick fame embedded in 15 cm thick PCC coping with locking arrangement with two coats of synthetic enamel with internal external surfaces over a coat of red oxide primer including necessary excavation removal of surplus soil to a distance not exceding 50 mtr returning filling in PCC 1:3:6 type C2 75 mm thick as in foundation/floor brick work (one brick thick) in cement mortars (1:4) PCC 1:3:6 type C1 in copping, Plastering in cement mortor 1:4 and 75 mm thick hard core below foundation etc including dismantling valve pit chamber complete all as specified and directed. |
| 47 | Sluice valve flanged 80mm dia including provision of rubber or fiber board gasket for jointing and provison for suitable size bolts, nuts, washers and white lead or mineral oil of complete all as specified and directed. |
| 48 | Ball brass valves high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of dia 25mm all as specified and directed. |
| 49 | Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 50 | Demolition of stone slabs and granite/ tiles of any description laid bedded and pointed in any mortor in any thickness in floors, aprons etc all as specified and directed. |
| 51 | Demolition of cement concrete ( unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level ) etc complete all as specified and directed |
| 52 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed. |
| 53 | 40mm thick PCC(1:2:4) type B1 using 20mm graded stone aggregate as in flooring finished even and smooth using extra cement all as specified and directed. |
| 54 | Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 55 | Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 350x250x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 56 | Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in Cement Mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | Preparation of new plastered or unplastered surface of walls and applying two coats of oil bound distemper washable over a coat of primer using chalk whiting complete all as specified and directed. |
| 58 | Complete removal of existing treatment on plastered surfaces and applying two coats of oil bound distemper washable over a coat of primer using chalk whiting on wall surface complete all as specified and directed. |
| 59 | Granite (of any type) work, 18 to 20mm thick inclding nosing, removing edges etc., (table rubbed and polished), cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite all as specified and directed. |
| 60 | Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed. |
| 61 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed. |
| 62 | Factory made UPVC white colour sliding window three track, area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) window profile with hollow section with multi chamber frame (88mm x 85mm) sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 (± 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch Lock of zinc alloyed (white powder coated) steel roller system stainless stell wire cloth 0.36mm nominal dia of wire and average width of aperture 140mm and required accessories all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories net opening will be measured for payment purpose. |
| 63 | Figured glass 4mm thick pin head type and glazing with oil putty in squares not exceeding 0.5Sq.m in each pane all as specified and directed. |
| 64 | 2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed. |
| 65 | 35mm thick factory made, second class hardwood panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail and as per IS 1003 (Part -I) Kiln seasoned and chemically pressure treated all as specified and directed. |
| 66 | MS Butt hinges medium weight cold rolled 125mm long complete all as specified and directed. |
| 67 | Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed |
| 68 | Aluminium anodised, barrel tower bolts of extruded section 150mm long and fixed complete all as specified and as directed |
| 69 | 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 70 | Floor door stopper of aluminium alloy body 140mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed. |
| 71 | Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 72 | Supply fixed in repair block board grade 1 quality exterior grade, decorative type with decorative face veneers on both faces of 18/19mm thickness as in shelves etc all as specified and directed. |
| 73 | Taking up or down steel tubing and connections, bore of pipe 15 mm complete all as specified and directed. |
| 74 | 3 Layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion elded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 20mm dia all as specified and directed. |
| 75 | PVC connection 15mm size with PTMT length 600mm all as specified and as directed. |
| 76 | Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs complete all as specified and directed. |
| 77 | Bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore, fixed in repairs all as specified and directed. |
| 78 | 32/40mm dia expandable type PTMT/LDPE waste pipe for wash hand basin/ kitchen sink including fixed in repairs complete all as specified and directed. |
| 79 | 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 80 | Dismantling PVC water tank exceeding 500 ltrs and not exceeding 1000 Ltr capacity from existing position all as specified and as directed. |
| 81 | Rotational moulded polyethylene water storage tank 3 layered of capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed. |
| 82 | Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, inluding fixed in repairs complete all as specified and directed |
| 83 | 20 mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete all as specified and directed. |
| 84 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft / loose soil complete all as specified and directed. |
| 85 | Schedule of Credit (Minus) Rs. 53079.00 NOTE: Bidder shall insert credit amount of Rs. 53079.00 as rate in Green field under Col-5. Please Enable Macros to View BoQ information |
