|
| 1 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified. |
| 2 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified & directed. |
| 3 | Excavation in trenches exc 1.50 mtr wide and upto 3.00 mtr in depth for foundation etc or for shafts , wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Excavation in soft/loose of soil in over areas n exc 1.5m in depth for foundation/Pits etc and getting out complete all as specified and as directed. |
| 5 | Excavation in soft/loose of soil in over areas exc 1.5m in depth for foundation/Pits etc and getting out complete all as specified and as directed. |
| 6 | Removing excavated material not exceeding 50m and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and as directed. |
| 7 | M&L for Hardcore of gauge n-exc 63mm of broken bricks ,deposited ,spread and levelled in layers n-exc 15 cm thick watered and rammed to a true surface complete all as specified. |
| 8 | Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete. |
| 9 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified & directed. |
| 10 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat surface complete all as specified. |
| 11 | M&L for M-25 concrete (using 20mm graded stone aggregates) in Foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 12 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions of shape Square, Rectangular or polygonal complete all as specified. |
| 13 | M&L RCC as in Columns, pillars, piers, posts and struts type M-25(using 20mm graded) stone aggregate complete all as specified. |
| 14 | Form work to sides of concrete roof beams, lintels cantilevers etc including supports. |
| 15 | M&L RCC in beams, Cantilivers,bressummers, lintels over 1.5 mtr span uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified. |
| 16 | Form work to soffits of suspended slab such a roof slab etc not exc 200 mm thick complete all as specified. |
| 17 | Form work to edges of roof slab, RCC bands etc n.exc 200mm complete all as specified. |
| 18 | M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-25(Design mix) using 20mm stone aggregate complete as specified. |
| 19 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality all as specified and directed. |
| 20 | M&L Mild steel TMT bars 6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia as in strips spacers and binders complete all as specified. |
| 21 | M&L for brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 |
| 22 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified. |
| 23 | Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar. |
| 24 | M&L Glazed ceramic digital coloured tiles (size 450 x 350x 6-7mm) as in vertical surfaces set & jointed in neat cement slurry & pointed with white or coloured cement to match including Rendering 15 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete all as specified. |
| 25 | M&L for non skid, ceramic coloured tiles of size 400x 400mm x 7-8mm thick in floors/shelves etc, set & jointed in neat cement slurry & pointed in coloured cement to match including bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specifed and directed. |
| 26 | M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site. |
| 27 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified. |
| 28 | S&F Factory made solid PVC Moulded shutter 28-30mm thick styles with 2,4 or 6 raised panels design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam sheet on the back face with particle board core complete all as specified. |
| 29 | S&F butt hinges of medium weight cold rolled mild steel 100 mm size and fitted to wooden or steel frame all as specified and directed. |
| 30 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 31 | S&F Aluminium anodised barrel Tower Bolts of extruded section 150 mm long fixed with screws. |
| 32 | S&F Aluminium anodised handle of extruded section 100 mm long fixed with screws. |
| 33 | M&L for 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified . |
| 34 | M&L Preparing new ceiling surfaces applying three coats of white wash complete all as specified. |
| 35 | M&L for 10mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and smooth without using extra cement, all as specified . |
| 36 | M&L for 10 mm thick cement plastering concrete surfaces in cement mortar 1:4 finished even and smooth etc.complete all as specified |
| 37 | M&L Preparing new plastered surfaces of walls and applying two coats of OBD over a layer of 2 mm thick JK Birla wall putty complete all as specified |
| 38 | M&L for 15 mm thick external rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified. |
| 39 | M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping, Benching, Haunching and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed. |
| 40 | S&F galvanised 2 starand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc as dirrected. |
| 41 | S&F 610mm dia GI wire dia 2.5mm zinc coating 250GSM razor blade concertina coil complete all as specified by Engineer-in-charge. |
| 42 | Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed. |
| 43 | M&L for rendering 5mm thick in CM 1:3 on cocnrete surfaces and fishinf even and smooth complete all as specified and directed. |
| 44 | M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified. |
| 45 | M&L for Preparing new plastered surfaces of walls two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint etc complete all as specified |
| 46 | Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete. |
| 47 | M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified. |
| 48 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified. |
| 49 | S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore |
| 50 | S&F Table top Wash hand basin Art Basin white size 455x340x135mm curvy bowk, glossy finish Make : Somany |
| 51 | S&F Pillar tap single lever Basin mixer with braided houses complete all as specified and directed. SR No : 272111140021 Make : somnay |
| 52 | S&F 2 way bib tap SR No : 272211500071 Complete all as specified and directed, Make : Somany |
| 53 | S&F Health faucet Sr No : 272150680321 Make : Smonay |
| 54 | S&F wall mixer 3 in 1 SR No : 272201140031 Make : Somany |
| 55 | S&F Angle Cock/Stop Cock SR No : 272211500091 Make : Somany |
| 56 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 57 | S&F Cast iron 75mm bore Bends (any radius),PVC (SWR) bends any radius complete all as specified and as directed. |
| 58 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , complete all as specified. |
| 59 | S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 60 | S&F 110mm bore PVC(SWR) pipe vent cowl complete all as specified. |
| 61 | M&L 75mm thick Plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of Paver blocks complete all as specified and directed. |
| 62 | M&L 100mm thick Plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub base of Paver blocks complete all as specified and directed. |
| 63 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 64 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with Grey cement and pigment complete all as specified. |
| 65 | Dismantling Old existing framed works such as grills, grating, manhole covers ,etc . |
| 66 | S&F Framed work Fe 290 Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 67 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 68 | S & F Aluminium Composite Panel sheet of 3 mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron fixed with suitable Self Tapping Screws over frame work of anodised aluminium tubular section 25 X 50mm, 2mm thick, duly fixed to wall / ceiling with expansion fastener, having panels not exceeding 1200X1200mm with necessary silicon filling, in approved pattern / size as in column, beam, wall etc. complete all as specified and as directed. Note:- Rate quoted is deemed to be included for necessary MS Scaffolding up to a height of 12m from the GL for carrying out the job. Nothing shall be paid extra on this account. [Make of Aluminium Composite Panel: ALSTRONG / ALCOBOND / ALSTONE] [Make of Aluminium Sections: JINDAL / HINDALCO / INDAL] |
| 69 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed in CM 1:4 with grey cement slurry and pointed with white cement 1:2 with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 70 | Demolition and breaking up drain pipes (salt glazed stone ware) set in cement upto 150mm dia complete all as specified and directed |
| 71 | Demolition and breaking up drain pipes (salt glazed stone ware) set in cement size 200mm dia complete all as specified and directed |
| 72 | Demolition and breaking up drain pipes (salt glazed stone ware) set in cement size 300mm dia complete all as specified and directed |
| 73 | Supply and fix 150mm bore DWCPE (SN08) pipes snapefit coupler and rubber rings including testing and properly jointed laid in trenches to a level on plain bed complete all as specified and directed |
| 74 | Supply and fix 200mm bore DWCPE (SN08) pipes snapefit coupler and rubber rings including testing and properly jointed laid in trenches to a level on plain bed complete all as specified and directed |
| 75 | Supply and fix 300mm bore DWCPE (SN08) pipes snapefit coupler and rubber rings including testing and properly jointed laid in trenches to a level on plain bed complete all as specified and directed |
| 76 | M&L cement concrete (1:4:8) type D2 using 40 mm graded stone agg 75 mm thick as in bed to 150mm drain pipes including packing under and hunching against sides of the pipes after they are lead and tested |
| 77 | M&L cement concrete (1:4:8) type D2 using 40 mm graded stone agg 75 mm thick as in bed to 200mm drain pipes including packing under and hunching against sides of the pipes after they are lead and tested |
| 78 | M&L cement concrete (1:4:8) type D2 using 40 mm graded stone agg 75 mm thick as in bed to 300mm drain pipes including packing under and hunching against sides of the pipes after they are lead and tested |
| 79 | M&L for using mechanical means or manual method to clean the existing Sewage Line and Manhole of any size or depth to clean such that free from any soil, dirt or building material including demolition of any existing foreign material , complete all as directed by Engr-in-charge. |
| 80 | S&F SFRC manhole covers and frame medium duty of overal size 900mmX450mmX80mm thick, factory made and test load 10 tonnes (MD-10), strength as per IS: 1726-1991 (Make-Polycrete) all as specified by Engineer-in-Charge. |
| 81 | Cutting into existing manholes for connecting new pipes, making good to (150 mm bore) pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 82 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. |
| 83 | M&L providing precast cement concrete type B1 1:2:4 (using 20mm ) in landing, cover slabs (for manholes/ open drain etc) set in cement mortar 1:4 complete including necessary cover slab all as specified and directed. |
| 84 | S&F in repairs vitreous china wash down water closet pedestal pattern white complete and connectin to single symphonic action type PVC flushing cistern 10 ltr capacity and fixed in floor with brass screw complete all as specified and directed by Engr-in-Charge Make : Hindware/Parryware Please Enable Macros to View BoQ information |
