|
| 1 | Earthwork excavation for foundation to the full depth as may be directed by departmental officers in all types of soils except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth in the places shown by the departmental officers with initial lead of 10 Meters and initial lift 2 Meters and clearing and leveling the site etc. complete complying with standard specification. |
| 2 | Cement concrete 1:4:8 (One cementFour sand and Eight aggregate) using 40mm gauge ISS jelly for foundation and flooring including all cost of labour and materials at site, mixing concrete, laying, ramping, curing, etc complete and dewatering if found necessary and laid in layers of not more than 15cm thick etc. complete complying with standard specification. |
| 3 | Providing and erecting centring for sides and soffits including supports and strutting for the following items detailed below with all cross bracing using 10 gauge mild steel sheets of size 90cm x 60 cm and stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 5cm and spaced about 90cm center to center and supported by casurina props of 10cm to 13cm dia spaced at 75cm center to centre etc. complete complying with standard specification |
| 4 | Square column |
| 5 | Gradebeam |
| 6 | Plain surface |
| 7 | Supplying, fabricating and placing in position mild steel or ribbed tor steel grills for all RCC works as per the design given including cost of steel, binding wire and all labour charges etc. complete complying with standard specification |
| 8 | Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification |
| 9 | Upto Basement |
| 10 | Above Basement |
| 11 | Brick work in cement mortar 1:5 (One cement and five sand) mix using country bricks of size 8 ¾ ” x 4 ¼” x 2 ¼” including cost and conveyance of all materials and all labour charges etc. complete complying with standard specification |
| 12 | Basement |
| 13 | Above Basement |
| 14 | Plastering with cement mortar 1:5 (one cement and five sand) mix,12mm thick including cost of all materials all labour charges etc., complete complying with standard specification |
| 15 | Plastering with cement mortar 1:3 (one cement and three sand) mix,10mm thick including cost of all materials all labour charges etc., complete complying with standard specification |
| 16 | Finishing the top of roof with one course of Decorativepressed tiles of 12mm of required size approved quality laid in cement mortar 1:3, 20mm thick (One cement and three sand) mixed with water proofing compound powder 2% by weight of cement usedand flush pointing the joints with the same mortar etc. complete complying with standard specification. |
| 17 | Finishing the top of the flooring with ceramic tiles (300x300x6mm) of best quality and colour approved by the departmental officers laying in cement mortar 1:3 (one cement and three sand) mix, 20mm thick including pointing the joints with white cement neatly in all floors etc. complete complying with standard specification |
| 18 | Supplying and painting two coats with readymixed good quality approvedcolour plastic emulsion paint over one coat of wall primer as approved by the departmental officers including preparation of surfaces etc. complete in all floors as per standard specification |
| 19 | Supply and Fixing of Decorative pressed jolly |
| 20 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of 300x200x6 mm sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) Please Enable Macros to View BoQ information |
