Tender For Replacement Of Ceiling Plastering With Two Coat Putty For 9 Schools In Thiruverumbur
Tender Value
14.28 Lakhs
Estimated cost
Bid Submission
06 Mar 2026
0 days left
EMD
14500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruverumbur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Replacement Of Ceiling Plastering With Two Coat Putty For 9 Schools In Thiruverumbur
BOQ
| Sl. No. | Item Description |
| 1 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building in Poigaikudi in Asoor Panchayat. |
| 2 | Chipping of Pressed Tiles & Weathering Course |
| 3 | Chipping of concrete and roughening the surface |
| 4 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 5 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 6 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 7 | Oilbound Distember two coats over priming coat with white cement. |
| 8 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building in Elanthanpatty in Kanthalur Panchayat. |
| 9 | Chipping of Pressed Tiles & Weathering Course |
| 10 | Chipping of concrete and roughening the surface |
| 11 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 12 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 13 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 14 | Oilbound Distember two coats over priming coat with white cement. |
| 15 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building facing in Elanthanpatty Building 2 in Kanthalur Panchayat. |
| 16 | Chipping of Pressed Tiles & Weathering Course |
| 17 | Chipping of concrete and roughening the surface |
| 18 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 19 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 20 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 21 | Oilbound Distember two coats over priming coat with white cement. |
| 22 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building in Kumbakudi Panchayat. |
| 23 | Chipping of Pressed Tiles & Weathering Course |
| 24 | Chipping of concrete and roughening the surface |
| 25 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs,beams,sunshades,facia, canopy slab,staircasewaist slab,landing slab etc.,with cement mortor 1:3(one cement and three p.sand )10mm thick including all |
| 26 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 27 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 28 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 29 | Oilbound Distember two coats over priming coat with white cement. |
| 30 | Replacement of Ceiling Plastering with two Coat Putty for PUM School Building at Navalpattu South in Navalpattu Panchayat. |
| 31 | Chipping of concrete and roughening the surface |
| 32 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 33 | Chipping and Removing Damaged Loose plastering and concrete, cleaning the surface and removing the rust in reinforcement rods using rust remover, fixing steel rods wherever required and applying 1 coat of Zinc rich, anti corrosive epoxy coating over the steel rods and apply 1 coat of SBR polymer latex slurry coat as bonding agent for bonding with the old surface and plastering the surface with polymer modified mortar mixed with SBR 1 Litre per bag of cement |
| 34 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 35 | Oilbound Distember two coats over priming coat with white cement. |
| 36 | Replacement of Ceiling Plastering with two Coat Putty for PUM School Building at Navalpattu North in Navalpattu Panchayat. |
| 37 | Chipping of concrete and roughening the surface |
| 38 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 39 | Chipping and Removing Damaged Loose plastering and concrete, cleaning the surface and removing the rust in reinforcement rods using rust remover, fixing steel rods wherever required and applying 1 coat of Zinc rich, anti corrosive epoxy coating over the steel rods and apply 1 coat of SBR polymer latex slurry coat as bonding agent for bonding with the old surface and plastering the surface with polymer modified mortar mixed with SBR 1 Litre per bag of cement |
| 40 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 41 | Oilbound Distember two coats over priming coat with white cement. |
| 42 | Replacement of Ceiling Plastering with two Coat Putty for PUESchool Building at bhakthavachalam nagar in Navalpattu panchayat |
| 43 | chipping of pressed tiles & weathering course |
| 44 | Chipping of concrete and roughening the surface |
| 45 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 46 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 47 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 48 | Oilbound Distember two coats over priming coat with white cement. |
| 49 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building at Poolangudi in Palanagudi Panchayat |
| 50 | Chipping of concrete and roughening the surface |
| 51 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 52 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 53 | Oilbound Distember two coats over priming coat with white cement. |
| 54 | Replacement of Ceiling Plastering with two Coat Putty for PUE School Building at Chinna Sooriyur (Entrance building) in Sooriyur Panchayat. |
| 55 | Chipping of concrete and roughening the surface |
| 56 | Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Applying Polyurethane hybrid liquid applied GRIHAcertified Waterproofing coating with flutyne protectiontechnology, single component, cold applied, waterbased acrylic and UV resistant water proofingtreatment to the Existing Roof having Tile or anynon-porous surface applied @ 1.5 l/m2 in 2 coats toachieve 1mm DFT, having tensile strength with 45gsm glass fibre mesh 4N/mm2 confirming to ASTM D412; Elongation at break ≥ 300% and Crack bridgingability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390- 8:2019, including surface preparation, priming thesurface with single component high-performancewaterborne tile primer which is suitable for non -porous surface at a rate of 0.14 L/m2 and spreading 45gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwichedbetween the first and second coat completely as perspecification. The finished cost to include surfacepreparation, making coving at Junction, treatment ofcracks completely as per specification. |
| 57 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc |
| 58 | Oilbound Distember two coats over priming coat with white cement. |
| 59 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender