|
| 1 | supply and fixing of 230 V.No.volt coil |
| 2 | supply and fixing of Starter relay set |
| 3 | 1.5 HP Motor rewinding charges including materialscost. |
| 4 | supply and fixing of 1.5HP motor bearing 2 nos.and maintanance work. |
| 5 | supply and fixing of 20 MFD Running condancer. |
| 6 | supply and fixing of 1.5HP Comproser 3 Bearings and mainteance work fixing labour charges |
| 7 | supply and fixing of Comprosser Connecting rod and Brass push and maintenance work. |
| 8 | supply and fixing of Comprosser Piston rings and 3 bearing and paral oning work. |
| 9 | supply and fixing of Comprosser oil seal |
| 10 | supply and fixing of 3/4\\" Air filter |
| 11 | supply and fixing 20-40 Multi grade oil 1/2 litre |
| 12 | supply and fixing Comprosser Motor V.Belt No.35-42 |
| 13 | supply and fixing of 1/2\\" G.I. Pipe. (TWAD SR 25-26 Page No.30) |
| 14 | supply and fixing of 1\\" G.I. Pipe. (TWAD SR 25-26 Page No.30) |
| 15 | 20mm HDPE Hose one metre (PWD SR 25-26 Page No.168) |
| 16 | 25mm HDPE Hose one metre (PWD SR 25-26 Page No.168) |
| 17 | 20mm Gate valve (PWD SR 25-26 Page No.90) |
| 18 | 25mm Gate valve (PWD SR 25-26 Page No.90) |
| 19 | 20mm G.I Union (TWAD SR 25-26 Page No.36) |
| 20 | 15mm G.I.Bend (TWAD SR 25-26 Page No.36) |
| 21 | 15mm GI Coupling (TWAD SR 25-26 Page No.36) |
| 22 | 25mm GI Coupling (TWAD SR 25-26 Page No.36) |
| 23 | 25mm CPVC pipe (PWD SR 25-26 Page No.170) |
| 24 | 25mm CPVC Tank Nipple (PWD SR 25-26 Page No.175) |
| 25 | Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type) (PWD SR 25-26 Page No.91) |
| 26 | 50mm M.S.Clamp set. |
| 27 | 6 1/2\\" Bore cover plate with bole nut including |
| 28 | Comproser motor pipe Borewell inner side repair,remove and re errection labour charges |
| 29 | 1.5HP Sup motor repair and remove & re errection charges |
| 30 | DOL Starter with single phasing preventor |
| 31 | MCB 240V/415V 50hz AC Supply DP 40A, 10KA. (PWD SR 25-26 Page No.237) |
| 32 | 32 Amps Fuse Carrier |
| 33 | 2.5 sq.mm 3 Core Flat type copper cable (TWAD SR 25-26 Page No.140) |
| 34 | 4.0 sq.mm 3 Core Flat type copper cable (TWAD SR 25-26 Page No.140) |
| 35 | 6.0 sq.mm 3 Core Flat type copper cable (TWAD SR 25-26 Page No.141) |
| 36 | 2x4sqmm cable& G.I wire Service wire change incl.material with labour |
| 37 | 3/4\\" x 6' G.I.Service pipe & Fixing labour charges. |
| 38 | Supply and fixing of HDPE tank 500 Litres (TWAD SR 25-26 Page No.99) |
| 39 | Supply and fixing of HDPE tank 1000 Litres (TWAD SR 25-26 Page No.99) |
| 40 | Supply and fixing of HDPE tank 2000 Litres (TWAD SR 25-26 Page No.99) |
| 41 | Single phase Submersible pump set without panel board - Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %(15LPMx90M) (TWAD SR 25-26 Page No.117) |
| 42 | 2000 litre tank tap cover |
| 43 | Provision for GST 18% Please Enable Macros to View BoQ information |
