|
| 1 | Swaged steel tubular pole ( 410SP-2) of height 7 Mtr. onfirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 2 | Single Arm (1x1) mtr Long |
| 3 | Double Arm (1x2) mtr Long |
| 4 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. |
| 5 | a) Above 6.5 mtr and Upto 8.0 mtr |
| 6 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 7 | a) 90 W LED campu lgith |
| 8 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required |
| 9 | a) 3x1.5 sq mm |
| 10 | Supplying and laying of XLPE insulated PVC sheathed aluminium armorued cable working voltage upto 1100 votls as per IS:7098 (prt I) of following sizses. |
| 11 | a) 4 core 16 sq mm (From Electric pole to feeder piller) |
| 12 | b) 4 core 10 sq mm (For LED Street light) |
| 13 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering. |
| 14 | 10 sq mm aluminium lugs |
| 15 | 16 sq mm aluminium lugs |
| 16 | S/F 25 mm dia ISI marked PVC conduti standing of cable from tranch to junction box |
| 17 | S/F 40 mm dia Medium class G.I pipe (cable laying in road crossing) |
| 18 | Supplying and fixing cable junction box make- Sintex/ Hensel or equi) |
| 19 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 20 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 21 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 22 | Fabrication, installation with 16 SWG MS sheet with one coat steel primer and two coat spray painting with approved shade making PCC plinth and foundation including fitting and fixign connection, transportation upto work site labour charge etc all complete as reqd. |
| 23 | 63 Amp MCCB 10 KA fixed thermal setting (Outdoing)- 2 Nos |
| 24 | 100 Amp MCCB 16 KA fixed thermal setting (Incoming)- 1 Nos |
| 25 | LED indicator lamp R/Y/B/G- 3 Nos |
| 26 | 25 mm x 5 mm copper strips (1.15 kg/mtr)- 8 Kg |
| 27 | GST @ 18% |
| 28 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
