|
| 1 | Swaged steel tubular pole ( 410SP-2) of height 7 Mtr. onfirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 2 | Swaged steel tubular pole ( 410SP-2) of height 7 Mtr. onfirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 3 | Double arm |
| 4 | Hexaponal bract for 6 nos Flood light |
| 5 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. |
| 6 | a) Above 6.5 mtr and Upto 8.0 mtr |
| 7 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 8 | a) 90 W LED campu lgith |
| 9 | S/F 150/160W LED Flood light (on Watch Tower & Building) |
| 10 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required |
| 11 | a) 3x1.5 sq mm |
| 12 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 13 | a) 2 way single door (for DP Isolator for Building & Watch Tower) |
| 14 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 15 | a) 40 Amp Double pole Isolator |
| 16 | Supplying and laying of XLPE insulated PVC sheathed aluminium armorued cable working voltage upto 1100 votls as per IS:7098 (prt I) of following sizses. |
| 17 | a) 2 core 10 sq mm (for Street lgiht on Pole) |
| 18 | b) 2 coe 6 sq mm (for LED Flood light on Building & Watch tower) |
| 19 | c) 2 core 6 sq mm (for Fidder Panel to watch tower & different building) |
| 20 | d) 3.5 core 35 sq mm (Panel to Fidder panel) |
| 21 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering. |
| 22 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 23 | 2 core 6/10 sq mm aluminium lugs |
| 24 | Supplying and fixing cable juncton box wtihout MCB (Make- Sintex/Hensel or equi) |
| 25 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 26 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 27 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 28 | Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required. |
| 29 | a) 32 Amps DP Main switch |
| 30 | b) 200 Amps TP&N (for main) |
| 31 | Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal board, making connection, earthing the body etc. as required. |
| 32 | a) 200 Amps 4 Pole |
| 33 | Providing and fixing following capacity busbar chamber with 4 strips of length 300 mm made of copper suitalbe for following capacity complete with all accessories including connections, earthing the body etc as required. |
| 34 | 200 Amps |
| 35 | Fabrication, installation with 16 SWG MS sheet with one coat steel primer and two coat spray painting with approved shade making PCC plinth and foundation including fitting and fixign connection, transportation upto work site labour charge etc all complete as reqd. |
| 36 | 100 Amp MCCB 16 KA fixed thermal setting- 1 Nos |
| 37 | 40 amp TP MCB-8 Nos |
| 38 | LED indicator lamp R/Y/B/G-3 Nos |
| 39 | 25mm x 5 mm copper strips |
| 40 | 10 sq mm PVC insualted ISI marked single core copper conducotr cable |
| 41 | 10 sq mm copper lugs |
| 42 | CGST @ 9% |
| 43 | SGST @ 9% |
| 44 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
