|
| 1 | Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % (20Lpm x 100m) |
| 2 | SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase /50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).For 2.0 HP Motors |
| 3 | Supply , Delivery & fixing of Fuse Carrier of suitable Amps complete etc.,32 Amps Porcelain Fuse Unit (500V) |
| 4 | 63 Amps Porcelain Fuse Unit (500V) |
| 5 | Supply & Delivery & Erection of special accessories including cost and conveyance of all materials and cost of all incidential etc., complete. Bore Clamp |
| 6 | bore cap |
| 7 | 1 1/4\\" (32mm ) dia GI Pipe 32mm Gi pipe |
| 8 | 1 1/4\\" (32mm ) dia GI Union |
| 9 | 1 1/4\\" (32mm ) dia GI Coupler |
| 10 | 1 1/4\\" (32mm ) GM Gate Valve |
| 11 | 1 1/4\\" (32mm) dia GI Elbow |
| 12 | 1 1/4\\" (32mm) dia GI Tee |
| 13 | 32mm x 25mm dia GI Reducer elbow |
| 14 | 32mm x 25mm dia GI Reducer tee |
| 15 | Adapter |
| 16 | 32mm Hex Nipple |
| 17 | 25mm gi pipe |
| 18 | 25mm gi elbow |
| 19 | 25mm gi tee |
| 20 | 25mm gi coupling |
| 21 | 15mm gi tap |
| 22 | 32mm pvc pipe |
| 23 | 32mm pvc elbow |
| 24 | 32mm upvc pipe |
| 25 | 32mm upvc elbow |
| 26 | 32mm upvc tee |
| 27 | 32mm upvc coupling |
| 28 | 32mm upvc union |
| 29 | 32mm upvc hex nipple |
| 30 | supply and fixing of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 25mm (3/4”) |
| 31 | 32mm (1”) |
| 32 | Supply and Fixing of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 4.0 sqmm |
| 33 | 6.0 sqmm |
| 34 | Supplying and delivery of 32 mm OD dia UPVC Pipes of approved quality and best varity of B Class pipe etc., complete.with necessary water cealing arrangements. |
| 35 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20GI bearer wire for service connection mains |
| 36 | Supply and delivery of Nylon Rope for Bore-well complete etc., |
| 37 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., Please Enable Macros to View BoQ information |
