|
| 1 | HVAC Component |
| 2 | Supply, Installation, Testing and Commissioning of air cooled ducted split type air conditioning machine with each having a capacity and details as mentioned below suitable for operation on R 32/R-410A /R-407 Green refrigerant comprising of Scroll type compressor hermetically sealed complete with automatic capacity, safety switches, lubrication system with min 5 year (OEM) warranty for both compressor and Printed Circuit Board (PCB) , Suitable capacity squirrel cage induction motor having class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine Isolation / disconnect switch, valves and accessories to inter connect compressor and condenser including pressure testing, vacuum. Necessary starters suitable for Indoor & outdoor unit complete with O/L ,U/V, phase reversal protection, single phase preventers i/c copper conductor control and power cable and drain pipe of suitable size and length etc complete as required. The total cooling capacity/heating capacity of tested unit shall have a capacity as per relevant IS code. The lab testing reports as per IS: 8148 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per ISO/International Electro technical Commission (IEC) 17025 standards / Central Power Research Institute (CPRI)/Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification as required. |
| 3 | 5.5 TR (3.2 EER) |
| 4 | 16.7 TR (3.2 EER) |
| 5 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : |
| 6 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 7 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 8 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm |
| 9 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm |
| 10 | 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm |
| 11 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm |
| 12 | P/F Flexible double canvas connection between indoor units and supply air duct. |
| 13 | SITC of duly painted MS stand. |
| 14 | P/F Heater Bank for winter heating comprising of 12 kw capacity having arrangement for on/off in stages with thermostat, geyserstat contactor, interconnected wiring control panel etc. |
| 15 | P/F Heater Bank for winter heating comprising of 4.5 kw capacity having arrangement for on/off in stages with thermostat, geyserstat contactor, interconnected wiring control panel etc. |
| 16 | Supply Erection, Testing and Commissioning of Electrical Panel Cubical Type, dust and vermin proof ingress protection, IP-42 Floor Mounted Switchboard with Hinged Lockable Doors fabricated out of 14 SWG CRCA Sheet with Powder Coating through 7 tank process with all accessories live parts shrouded and busbars insulated with heat shrinkable sleeves including solid / flexible connections, earthling etc., having 3mm thickness Gland Plate. LT Panel should have withstand fault level of equal to 50 KA for 1 second. Electrical standard complying and RAL 7032. Fitted with gaskets, Lifting Hooks, Cable Entry Bottom, Panel designed comprising of the following:- |
| 17 | PANEL No.-1 |
| 18 | INCOMER |
| 19 | MCCB FP 100A. 25KA. TM Based with O/L, & S/C Protection -1 |
| 20 | SPREADER SET -1 |
| 21 | EXTENDED ROTARY HANDLE -1 |
| 22 | R,Y PHASE INDICATING LAMP 240V AC -2 |
| 23 | B PHASE INDICATING LAMP 240V AC -1 |
| 24 | 6A. SP CONTROL MCB -3 |
| 25 | DIGITAL AMMETER WITH ASS -1 |
| 26 | Digital volte metter with VSS -1 |
| 27 | CT`s 100/5A. CL-1 15VA RESIN CAST/ NYLON CASING. -3 |
| 28 | CT SHORTING LINK -3 |
| 29 | NEUTRAL LINK -1 |
| 30 | OUTGOING |
| 31 | FOR HEAT BANK (12KW)- 1NO. |
| 32 | 32A. TPN 10KA MCB C CURVE TYPE -1 No. |
| 33 | 22KW S/D STR.- FOR AIR CONDITIONING UNIT - 1 NO. |
| 34 | 63A. TP 10KA MCB C CURVE TYPE -1 |
| 35 | 40A. TP POWER CONTACTOR -3 |
| 36 | ADD ON BLOCK 1NO+1NC - 3 |
| 37 | 24-40A. THERMAL OVERLOAD RELAY -1 |
| 38 | SINGLE PHASE PREVENTOR RELAY -1 |
| 39 | STAR DELTA TIMER -1 |
| 40 | AUXILIARY CONTACTOR 2NO+ 2NC -1 |
| 41 | START STOP PUSH BUTTON -2 |
| 42 | ON OFF INDICATING LAMP -2 |
| 43 | 6A. SP CONTROL MCB -3 |
| 44 | A/M SELECTOR SWITCH -1 |
| 45 | PLA RELAY -3 |
| 46 | NEUTRAL LINK -1 |
| 47 | ENCLOSURE & ACCESSORIES |
| 48 | Fabrication in 1.6/2.0mm.CRCA Sheet Powder Coating in Siemens Gray Shade, Wall mounted,Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. (1) |
| 49 | BUS BAR & HARDWARE |
| 50 | 100A. Aluminum Main Bus Bar, Load wise Sub Feeder Bus Bar Color Coated Heat Shrink Bus Bar sleave Nut-Bolt, Washer ,Hardware |
| 51 | etc. (1) |
| 52 | WIRING & ACCESSORIES |
| 53 | Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire, Copper Lugs, PVC Sleeve, Ferrules Numbers, Hardware & Labour etc. (1) |
| 54 | ELECTRICAL CONTROL PANEL-2 |
| 55 | MAIN INCOMER -1 |
| 56 | MCCB FP 100A. 25KA. TM Based with O/L, & S/C Protection- 1 |
| 57 | SPREADER SET -1 |
| 58 | EXTENDED ROTARY HANDLE -1 |
| 59 | R,Y PHASE INDICATING LAMP 240V AC -1 |
| 60 | B PHASE INDICATING LAMP 240V AC -1 |
| 61 | 6A. SP CONTROL MCB -3 |
| 62 | DIGITAL AMMETER WITH ASS -1 |
| 63 | DIGITAL VOLTMETER WITH VSS -1 |
| 64 | CT`s 100/5A. CL-1 15VA RESIN CAST/ NYLON CASING. -3 |
| 65 | CT SHORTING LINK -3 |
| 66 | NEUTRAL LINK - 1 |
| 67 | OUTGOING |
| 68 | FOR HEAT BANK (4.5KW)- 1 NO. |
| 69 | 16A. TPN 10KA MCB C CURVE TYPE -1 |
| 70 | 7.5KW DOL STR.- FOR AIR CONDITIONING UNIT - 1NO. |
| 71 | 25A. TP 10KA MCB C CURVE TYPE -1 |
| 72 | 18A. TP POWER CONTACTOR - 1 |
| 73 | ADD ON BLOCK 2NO+2NC -1 |
| 74 | 9-15A. THERMAL OVERLOAD RELAY -1 |
| 75 | SINGLE PHASE PREVENTOR RELAY - 1 |
| 76 | START STOP PUSH BUTTON - 2 |
| 77 | ON OFF INDICATING LAMP -2 |
| 78 | 6A. SP CONTROL MCB -1 |
| 79 | A/M SELECTOR SWITCH -1 |
| 80 | PLA RELAY -1 |
| 81 | NEUTRAL LINK -1 |
| 82 | ENCLOSURE & ACCESSORIES |
| 83 | Fabrication in 1.6/2.0mm.CRCA Sheet Powder Coating in Siemens Gray Shade, Wall mounted,Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. (1) |
| 84 | BUS BAR & HARDWARE |
| 85 | 100A. Aluminum Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt, Washer ,Hardware etc. (1) |
| 86 | WIRING & ACCESSORIES |
| 87 | Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire, Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. (1) |
| 88 | SITC of armoured copper conductor PVC sheathed, XLPE insulated cable of size 4C x 10 sqmm. on surface/wall/ on cable tray etc complete as per requirement. |
| 89 | SITC of armoured copper conductor PVC sheathed, XLPE insulated cable of size 4C x 6 sqmm. on surface/wall/ on cable tray etc complete as per requirement. |
| 90 | SITC of armoured copper conductor PVC sheathed, XLPE insulated cable of size 3C x 2.5 sqmm. on surface/wall/ on cable tray etc complete as per requirement. |
| 91 | P/F CPVC/UPVC drain piping (40 mm dia) complete with fittings, supports as per specifications and duly insulated with 6mm thick closed cell nitrile rubber insulation. |
| 92 | Minor civil work (including dismantling/repair/ cutting of wall, ducting, gypsm board and removal of scrap from the site) |
| 93 | Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. |
| 94 | 22 GUAGE (0.80 mm) |
| 95 | 24 GUAGE (0.63 mm) |
| 96 | Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class \\"O\\") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. |
| 97 | 19 mm |
| 98 | Supply installation testing and commisioning of GI volume control damper complete with neoprene rubber gaskets,nuts,bolts,screw linkages,flanges etc as per specifactions. |
| 99 | Supplying & Fixing of powder coated extruded aluminium Suplly Air grills with aluminium volume control damper as per specifications. |
| 100 | Supply fixing of powder coated extruded aluminium return Air grills with louvers but without volume control Damper complete as required. |
| 101 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control Dampers with anti smudge ring & removable core. |
| 102 | Supply, fixing testing commissioning of return air diffusers of powder coated aluminium without volume control Dampers anti smudge ring & removable core. |
| 103 | Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. |
| 104 | Fire damper |
| 105 | Actuator |
| 106 | Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm.) |
| 107 | Supplying and laying 6 SWG wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with G.I. thimble etc. as required. |
| 108 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 109 | 300 mm width x 50mm depth x 1.6 mm thickness. |
| 110 | 150 mm width x 50mm depth x 1.6 mm thickness. |
| 111 | Additional GST @ 06.33% as per latest norms |
| 112 | Civil component |
| 113 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 114 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 115 | 250x16 mm |
| 116 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 117 | 200x10 mm |
| 118 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 119 | 125 mm |
| 120 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 121 | Twin rubber stopper |
| 122 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, (Continue.......) |
| 123 | including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 124 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 125 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 126 | One coat |
| 127 | Two Coats |
| 128 | Taking out existing Alluminium door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 129 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 130 | Of area beyond 3 sq. metres |
| 131 | Dismantling old plaster, APP Membrane or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 132 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 133 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 134 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 135 | For fixed portion |
| 136 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 137 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 138 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 139 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. |
| 140 | Pre-laminated particle board with decorative lamination on both sides |
| 141 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 142 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 143 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 144 | With stainless steel cover plate minimum 1.25 mm thickness |
| 145 | Providing and fixing (Fire Retardant) Roller Zebra Blinds of approved premium range [ALCHEMY/ ESSENCE OF VISTA OR BASIX/ Imperial of MAC or Equivalent range of HUNTER DOUGLAS)] and 100% Polyester fabric with powder coated with decorative head rail etc 40 mm Aluminium roller tube for main channel, (heavy duty) aluminium bottom weight, ABS Plastic control unit with roll up chain including accessories, shade etc. complete & in all respect including removal of existing blinds where ever fixed, to the entire satisfaction of Engineer-in-charge. |
| 146 | Providing and Laying Water Proofing Coating having three coats of rain jackets @ 15 Sqft/Kg. Over a priming coat of water proofing paint @ 10 Sqft/Kg. Including mesh of size 800 microns with total thickness of 900 to 1000 microns forming high elastic and resilient coating to UV rayes and non toxic in nature with minimum life of 10 years complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 147 | Add Water Charges @ 0.5% |
| 148 | Credit of Old Material |
| 149 | Doors i/e Frames & Fittings Complete |
| 150 | Electrical Component |
| 151 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 152 | Group A |
| 153 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 154 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 155 | 25 mm |
| 156 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. |
| 157 | 3x1.5 Sq mm |
| 158 | 3 x 4 sq. Mm |
| 159 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 160 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 161 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 162 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 163 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 164 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 165 | Single pole |
| 166 | LED Down lighter (SMD Type) (System lumen efficacy ≥120<135lm/Watt). Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection , THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption |
| 167 | should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cableand earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . |
| 168 | 12 -15 watt |
| 169 | Supply and installation of suspended 4 FT linear LED fixture 20 W+/- 1W Recess mounted having Extruded Aluminium housing with HET UGR diffuser with minimum system lumen efficacy of 100 lm/W and width<55mm, P.F.>0.95 with THD<10% ,CCT 4000 K, CRI 80, UGR<19.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 140V to 300V. Fixture have Surge Protection 3kV along with installation accessories as required to install the fitting from the ceiling , job includes making connection with the existing light point, complete in all respect. |
| 170 | Supply & erection of 4' suface mounted capsule LED luminaire min 4000 lumen, max 40W & CCT 5700K required for kitchen lighting application along with installation accessories as required complete in all respect. |
| 171 | Supply of 380mm 900RPM heavy duty exhaust fan including Al louvers and wooden or metal frame complete in all respect if required at site up to entire satisfaction of EIC. |
| 172 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 173 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 174 | Upto 450 mm sweep |
| 175 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. As required. |
| 176 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 177 | Brush Less Direct Current (BLDC) Fan without Remote: Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 178 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 179 | Supply & installation of 35 Ltr horizontal type 5 star rating Geyser of approved make having tank made of ultra thick super cold rolled steel plates with 5 year tank warranty and 2 year heating element warranty and with whirl flow technology complete in all respect as per site requirement. |
| 180 | Supply of 3.5 core XLPE insulated and PVC sheathed armoured power cable of 1.1 kV grade, Aluminum conductor armoured cable of following size. 70 sqmm. |
| 181 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 182 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 183 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 184 | 3½ X 70 sq. mm (38mm) |
| 185 | SITC of High velocity air curatin constructed in 304 grade stainless steel, easy mounting arrangement with a flat frame which can be fixed on the wall/angle iron frame by suitable coach screws, Elegant look, specifications as per Annexure-I, complete in all respect upto the entire satisfaction of EIC. |
| 186 | 3 feet width |
| 187 | 4 feet width |
| 188 | Supplying and fixing of following Door sensor for Air curtain, job complete in all respect upto the entire satisfaction of EIC. |
| 189 | Single Door sensor |
| 190 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 191 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 192 | Supply and fixing 20 mm wooden board for fixing air curtains, with fasteners etc as required, complete in all respect. |
| 193 | Rebate of Old Geyser- 2 no. & Old Exhaust fan – 6 No., Old Switch/Socket, Ceiling Fan-52 Nos, Old dismantled wire, old ms conduit etc. |
| 194 | NOTE: This is a percentage rate tender, therefore, percentage is only to be quoted by the agency in figures on the amount mentioned in Schedule of quantity.Percentage Rate quoted by the agency should be inclusive of GST & all other taxes etc. Please Enable Macros to View BoQ information |
