|
| 1 | Item No. 1 / Page No. -13/19 (iii)Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I).(A) PVC Pipes (Dia)125 mm |
| 2 | 50 mm |
| 3 | 40 mm |
| 4 | Item No. 2 / Page No. - 52/6 Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.(ii) 50 mm dia |
| 5 | Item No. 3 / P - 53/9 (i) Supplying, fitting and fixing steel cutter piece upto 450 mm long withsockets.(ii) 50 mm dia. |
| 6 | Item No. 4 / Page No. - 53/10(i)Supplying, fitting and fixing plug of approved make conforming to I.S.specifications.(ii) 50 mm |
| 7 | Item No. 5 / Page No. - 56/27Supplying, fitting and fixing 300 mm M.S. housing clamp of approvedquality. |
| 8 | Item No. 6 / Page No. - 54/17Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 50 mm X 100 mm |
| 9 | Item No. 7 Supplying fitting and fixing cap as per direction EIC(ii) 125 mm |
| 10 | Item No. 8 / Page No. - 49/1Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.(ii) 125 mm dia. boring etc. top enlargement |
| 11 | (i) 50 mm dia. boring etc. |
| 12 | (f) For depth more than 150 metre for 50 mm dia. tube well with topenlargement of 125 mm dia.(i) 50 mm dia. boring etc. beyond 150 metre |
| 13 | Item No. 9 / Page No. - 55/20Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notchincluding hire and labour charges for all tools and plants and scaffolding as required. |
| 14 | Item No. 10 / Page No. - 55/23Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction |
| 15 | Item No. 11 .Supply & installation with accessories of submersible pump ( 1.5 HP ) directly coupled with wet winding type submersible Motor having following specification. Discharge - 3Cu.m / hourHead = SS / GM / Nory Shaft - SS Outlet - 40 mm / 50 mm dia Motor single phase 220 Volt + 5% wet winding tupe submersible motor Mod of starting - DOIMake - CRI / Kirloskar / Crompton / any approved make. N.B. - Manufacturer Test Certificate along with Curve start should be submitted at the time of delivery. |
| 16 | Item No. 12 / Page No. -13/19 (iii)Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(C) Elbow(Dia)32 mm |
| 17 | (B) Socket(Dia)32 mm |
| 18 | P - 16 / (F) (iii) Nipple (150 mm long)(Dia)25 mm |
| 19 | GST Item (Effect from 01.11.2017)18 % GST on Estimated Cost of Sl No- 1 to 12.2 |
| 20 | Labour Welfare Cess Item (Effect from 01.11.2017) 1% Labour Welfare Cess on Estmated Cost of Sl No -1 to 13 Please Enable Macros to View BoQ information |
