|
| 1 | Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. |
| 2 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing ... etc ii) With Bazree (N.B Variety) (other than SAIL/TATA/RINL) |
| 3 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 4 | Supplying, fitting and fixing low-down cistern parts.(iv) Rubber Kid |
| 5 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity |
| 6 | d) 2000 litre capacity |
| 7 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 8 | Labour for hoisting plastic water storage tank(i) Upto 1500 litre capacity.(a) Upto 2nd story from G.L. |
| 9 | (ii) Above 1500 litre upto 5000 litre capacity (a) Upto 2nd story from G.L. |
| 10 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm |
| 11 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Lengthb) 110 mm |
| 12 | (a) 75 mm |
| 13 | B) Fittings(ii) Plain Tee b) 110 mm |
| 14 | B) Fittings(ii) Plain Tee (a) 75 mm |
| 15 | B) Fittings(iii) Door Tee b) 110 mm |
| 16 | B) Fittings(iii) Door Tee (a) 75 mm |
| 17 | B) Fittingsx) Bend 87.5º b) 110 mm |
| 18 | B) Fittingsx) Bend 87.5º (a) 75 mm |
| 19 | B) Fittingsxi) Door Bend (T.S.) b) 110 mm |
| 20 | B) Fittingsxi) Door Bend (T.S.) (a) 75 mm |
| 21 | B) Fittingsxv) Vent Cowl b) 110 mm |
| 22 | B) Fittingsxvi) Pipe Clip b) 110 mm |
| 23 | B) Fittingsxvi) Pipe Clip (a) 75 mm |
| 24 | B) FittingsSolvent Cement 250 ML |
| 25 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 26 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 27 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar |
| 28 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 29 | (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). |
| 30 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work25 mm |
| 31 | 40 mm |
| 32 | 50 mm |
| 33 | 15 mm |
| 34 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes(Dia)40 mm |
| 35 | 50 mm |
| 36 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007(Q) Ball Valve15 mm |
| 37 | 25 mm |
| 38 | 40 mm |
| 39 | 50 mm |
| 40 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007(I) Tank connecting nipple25 mm |
| 41 | 40 mm |
| 42 | 50 mm |
| 43 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm |
| 44 | Supplying, fitting and fixing shower of approved brand and make(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 45 | (c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar) |
| 46 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).(iv) 50 mm dia |
| 47 | (v) 40 mm dia |
| 48 | (vii) 25 mm dia |
| 49 | (ix) 15 mm dia |
| 50 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long |
| 51 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long |
| 52 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 53 | Supplying, fitting and fixing soap holder.(b) Fibre glass |
| 54 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size |
| 55 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 56 | Dismantling wash basin with brackets with or without waste fittings. |
| 57 | Refixing wash basin with brackets with or without waste fittings. |
| 58 | Supplying, fitting and fixing Waste fittings complete.(a) C.P. over brass(iii) 40 mm |
| 59 | Supplying, fitting and fixing pillar cock of approved make(g) CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand). |
| 60 | c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent) |
| 61 | d) Polythene Piller Cock (EMCO / ATLAS or equivalent)(i) 15 mm |
| 62 | f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). |
| 63 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap (iii) 100 mm |
| 64 | Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/2009 and 1729/2002 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (vii) 100 mm X 600 mm |
| 65 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. ii) Plastic (hallow type) white |
| 66 | (a) E.W.C.(iv) Bestolite (solid type) white |
| 67 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 68 | Cleaning silt of inspection pit |
| 69 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground (i) 75 mm dia |
| 70 | (ii) 110 mm dia. |
| 71 | Taking out pipes of existing tube well including strainer etc. complete for portion of length:(a) Upto 20 metre below G.L.(i) 40 mm dia |
| 72 | Supplying, fitting and fixing popular Maya pump no-6 or similar.(i) For 40 mm dia. tube well |
| 73 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(i) 40 mm dia. |
| 74 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(i) 40 mm dia. |
| 75 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre(i) 40 mm dia. boring etc. |
| 76 | Renewing bolt and nut for hydrant. |
| 77 | Removing chokage of H.C.I. or S.W. pipe with split bamboo(a) Underground |
| 78 | (b) Over ground |
| 79 | Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type)(ii) 560 mm dia. |
| 80 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(a) Sink only(i) 530 mm X 430 mm x 180 mm |
| 81 | ADD GST @ 18.00% ON SUM OF AMOUNT Sl-01 to SL-42 |
| 82 | ADD Cess @ 1.00% ON SUM OF AMOUNT Sl-01 to SL 43 Please Enable Macros to View BoQ information |
