|
| 1 | Earth work excavation for desilting the existing rivers / canals / channels/odai/ nullas / drains/flood bowls/tanks/ reservoirs etc., consisting of very loose soil, silt, oily silt, slushy, marshy, loany, organic soil, sea shell and flat mica particles with zero present air void in unhygienic & insanitary conditions in under water and not under water deploying earth moving machinery with suitable floats buoys barge/ hydraulic excavator & other mechanical devices including the cost of hire charges for machinery, with cost of skilled operators with helper & cleaners for the entire operations to reach the banks in which the removed silt & sludge has to be dumped over either one of the rivers / canals / channels/odai/ nullas / drains/floods bowls / tanks / reservoirs etc, bank whichever is convenient as per the prevailing site conditions for easy conveyance and including jungle clearance etc.. complete (Rate excluding conveyance to dumping yard or low lying area) WRW0007 |
| 2 | Earth Excavator- Crawler / Tracked Excavator - 1 m3 capacity H-0111 |
| 3 | Tractor with Trailar including Driver and Fuel H-0107 |
| 4 | Cutting the Existing CC Road including all labour charges etc., complete complying with standard specifications. WD-W0740 |
| 5 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 6 | CEMENT CONCRETE - M7.5 (1:4:8) (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 7 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 8 | VIBRATED CEMENT CONCRETE - M15 (1:2:4) (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 9 | Supply and fixing RCC Post of 300mmX230mm including cutting and fixing in kerb wall and providing weld mesh of size 750 mm x 500 mm size to guage and providing M.S flat 35 x 6 mm size at middle angle allowed of size 25 x 25 x 5 mm including cost conveyance and welding with weld mesh. |
| 10 | Steel work MS grill of approved design for welded in built up sections/framed work, including cutting, hoisting, fixing, in position and applying a priming coat of approved steel primer using structural steel etc., as required - in gratting frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 11 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 12 | Plastering with C.M 1:5,12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 13 | Towards Supply and fixing of following GI & PVC Pipes and Spls et., complete as per std specifications |
| 14 | 80mm dia UPVC Pipe Schedule 80 M-1090 |
| 15 | 80mm dia G.I. Flange set WD-M0597 |
| 16 | 65mm dia GI Pipe M-0433 |
| 17 | 90mm dia PVC Bend |
| 18 | 50mm dia GI Coupling |
| 19 | 90mm dia PVC Elbow |
| 20 | Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or GGG 50 and disc of ductile cast iron GGG 40 or GGG 50 with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 and with 5 years warranty DI Non - Return Valve WD-M1220 80mm dia |
| 21 | Supply and Delivery of 5.00 HP Openwell submersible pumpset 400X35 as per is 14220 / 2002 Without panel board (Equals to Kirloskar) set with ISI marking along with 4.00 sq mm. cable (to 5m lengh) suitable for installation including Transportation charges etc., complete (APQ) |
| 22 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 Nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). Three Phase Panel Board Star- Delta With Two Level Guard And Auto Start 10 Hp WD-M1916 |
| 23 | Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities. Above 3 HP upto 7.5 HP WD-W0856 |
| 24 | Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing. SD 663 |
| 25 | Supply and run of 4x6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains. SD 68 |
| 26 | PVC insulated and sheathed 3 core flat type 6 Sqmm Copper cable conforming to is 694/1990 and as Amended thereafter et., complete as per std specifications WD-M1976 |
| 27 | Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V) 32A neutral link and earth link (1\\"x1/8\\"copperflat)on TW plank of size 600mm x 450mm x19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection SD 128 |
| 28 | Laying of pipe line including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification. |
| 29 | Vibrated Cement Concrete M20 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cement at site and cost form work and centering soft water labour charges for mixing, transporting, vibrating and compacting finishing and curing concrete, working at heights, hire charges for Hire charges for Tools and plants, including all other incidental charges, etc., complete as per standard specifications for CC Pavement |
| 30 | Provision for GST 18% CGST-9%, SGST-9% Please Enable Macros to View BoQ information |
