|
| 1 | NS items |
| 2 | Analysis of Rates for Supply and Fixing of FRP Gazibo hut in park with loading, unloading carriage and fixing etc. complete in all respect at site. |
| 3 | Providing and laying 15mm thick synthetic jogging track EPDM (9mmSBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM ColourGranules top layer) of approved makeCOLORSPACEF/COLORPLAY/BSG/NOVAL with test reports of certifiedNABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDMGranules shall have following minimum properties 00 Polymer content)22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) TensileStrength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as perASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UVrating of 3-5 on grayscale, (vi) VOC less than 3.0.0ww/1 [viii]Combustibility less than40 mm /m: (ix) Anti-Microbial and Anti-FungalTested material, and shall be laid in three layers.[1] First step shall be theapplication of singlecomponent Polyurethane based primer coating Layer, PU binder shallhave a specific gravity of 1.05 the appearance of clear pale yellowand viscosity of 350-2900 cps and shall be from the originalmanufacturer from the list of approved makes. 2. The second layer shall be an impact attenuating cushion layer of9mm thick black crumb rubber/SBR adhered with a polyurethanebinder and PU binder shall have a specific gravity of 1.05: theappearance of clear pale yellow and viscosity of 350- 2900 cps andshall be from the original manufacturer from the list of approvedmakes of to form a resilient porous layer. Crumb rubber /SBR shall bemixed with a minimum of 14% -16% of single-component PU basebinder so as to ensure that PU binder provides 100% coating of theSBR/crumb rubber particles. The third step shall be laying a 6mm 18%binder of single EPDM GRANULES top layer with atminimumcomponent polyurethane and shall provide 100% coating ofthe EPDM granules particles Design on the base top layer by a specialized team of installersaccording to the specification of approved material and shade. Thedetailed technical specifications of EPDM flooring testing. materialproperties, application procedure, etc. are attached herewith forcompliance. The documentary evidence has to be produced. for theprocurement of material for manufacturer`s test certificate. Anundertaking is to be furnished by the agency that surface system istested EN 1177 For shock absorption report of SPORTS LAB approvedby IAAF WORLD Athletics` company has not been World blacklisted byIAAF/Sports Authority of India/ Athletics `IAAF the means earlier `international Association of Athletics Federations or World Athleticsnow. The work shall be carried out by the manufacturer`s approvedapplicator and the prospective bidder should produce a letter fromthe approved strictly to manufacturer prior to submission of bid andsatisfaction of the technical specifications and the engineer-in- charge. (Guarantee Period Five years) |
| 4 | SIT `N` SNICKER SWING - Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser- cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. |
| 5 | CHEERFUL CHURN Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser- cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. |
| 6 | WHEELCHAIR Providing and supplying standard manual wheelchair made of high-quality powder- coated/mild steel tubular frame with durable, corrosion-resistant finish. The wheelchair shall be foldable type for easy storage and portability. Technical Specifications: Frame: Mild Steel/Aluminum, powder-coated finish Seat Width: Approx. 18 inches (450 mm), made of durable, washable canvas or PVC upholstery Backrest: Fixed/Foldable with reinforced support Wheels: Rear wheels: 24` solid rubber with hand rims for self-propelling Front wheels: 8` PU/solid rubber caster wheels Brakes: Manual parking brakes on both rear wheels Footrests: Foldable/Detachable, height-adjustable with heel support strap Armrests: Fixed or flip-up cushioned armrests Load Capacity: Minimum 100 kg Foldable Design: For convenient storage and transportation Warranty: Minimum 1 year against manufacturing defect |
| 7 | FISHY FUNNY SEE SAW Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Seat : designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm – 20 mm wire thickness, Coil height: Approx. 300 mm. |
| 8 | DUET Main Structure Material: Stainless Steel 304 Grade, 1.5–2.5 mm thick pipe or tube Dimensions: Minimum 60–32 mm outer diameter (OD), 1.5–2.5 mm thickness Cap HDPE Heigh dencity polyetheline 20mm thickness. Fasteners Material: Stainless steel fasteners are specified to BS EN ISO 3506. Part 1 covers bolts, screws and studs. Safety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 9 | XOXO PANEL Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Play panel LLDPE (Linear Low-Density Polyethylene), roto-moulded Thickness: 6–8 mm wall thickness. Finish Seamless, anti-static, smooth surface UV Resistance. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. |
| 10 | GONDOLA SWING Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playgroundstructures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. 130000Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team withadherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 11 | ARM REVOLVE ASSISTMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations. 36000Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity indual color combination. Safety Instructions and Exercise chart on machine - start and finish position chart stick on5mm |
| 12 | MERRY-GO-ADAPTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor- grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface FinishZinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending withfully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playgroundstructures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team withadherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 13 | PLAYFUL PANELMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum114 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor- grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Play panel designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for engaging graphics through play. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team withadherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 14 | HSR Items |
| 15 | As Per DNIT Please Enable Macros to View BoQ information |
