|
| 1 | NS Item -SIT N NICKER SWINGMain Structure Material:Galvanise Steel (GI)ERW Pipes ISI Marked IS1239 Minimum90 mm outer diameter (OD) 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor-grade polyester powder coating(min.60-80 microns),Bending with fully automatic PipeBending Machine,Welding With Laser Welding Heigh Power Machine Bending withfully automatic Pipe Bending Machine Welding With Laser Welding Heigh PowerMachine |
| 2 | NS Item -CHEERFUL CHURNMain Structure Material:Galvanise Steel (GI)ERW Pipes ISI Marked IS1239 Minimum 90mm outer diameter (OD),2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor gradepolyester powder coating(min.60-80 microns),Bending with fully automatic Pipe BendingMachine,Welding With Laser Welding Heigh Power Machine.,Bending with fully automaticPipe Bending Machine,Welding With Laser Welding Heigh Power Machine. Support Structure Material:Galvanise Steel (GI)ERW Pipes ISI Marked IS1239 Minimum 40mm outer diameter (OD),2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor gradepolyester powder coating(min.60-80 microns),Bending with fully automatic Pipe BendingMachine,Welding With Laser Welding Heigh Power Machine.,Bending with fully automaticPipe Bending Machine,Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door:CR sheet (1.6-2.0 mm thick)Manufacturing:CNC laser-cut withanti-slip perforated texture Finish:Hot-dip galvanized plus powder coating Load Capacity:Minimum 150 kg per platform. |
| 3 | NS Item -ARM REVOLVE ASSISTMain Frame:0114*3 mm thick M.S pipe and subordinate tube is of 088*3.0 largethickness M.S pipe.Handle:is made of 088*3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign.All remaining frame is made by 088*3mm thick MS pipe. Weight plates:Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder:is made by hard chromeplated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations. Bearing:Lubricated high grade63052RS`steel ball bearing.Base plate:is OD166,ID 116,and 6 mm thick.Pins:are made up of M.S bright bar.Bearing bushes:075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame:made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips:Hand grips is used on handles wherever necessary made up of high qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance. Closing caps:are of PP/NYLON/HDPE materia!. Laser cutting:profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other. Rubber:Safety base pads:Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor.Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations. Powders Coating:All components are chemically treated to seal exterior and interiorsurfaces against corrosion.The components are electro statically powder coated atminimum 80-100-micron thickness to make it resistant to scratch,corrosion and humidityin dual color combination. Safety Instructions and Exercise chart on machine -start andfinish position chart stick onActual size (ft.)3X2X3Minimum recommended area (ft.)6X4X6 |
| 4 | NS Item -Providing and supplying standard manual wheelchair made of high-quality powder-coated/mild steel tubular frame with durable,corrosion-resistant finish.The wheelchairshall be foldable type for easy storage and portability. Technical Specifications:Frame:Mild Steel/Aluminum,powder-coated finishSeat Width:Approx.18 inches(450 mm),made of durable,washable canvas or PVC upholsteryBackrest:Fixed/Foldable with reinforced support Wheels:Rear wheels:24`solid rubber with hand rims for selfpropellingFront wheels:8`PU/solid rubber caster wheelsBrakes:Manual parking brakes on both rear wheelsFootrests:Foldable/Detachable,height-adjustable with heel support strapArmrests:Fixed or flip-up cushioned armrestsLoad Capacity:Minimum 100 kg Foldable Design:For convenient storage and transportationWarranty:Minimum I year against manufacturing defect |
| 5 | NS Item -Sea-SawMain Structure Material:Galvanised Steel (GI)ERW Pipes ISI Marked IS1239 Minimum90 mm outer diameter (OD),2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min.60-80 microns),Bending with fully automatic PipeBending Machine,Welding With Laser Welding Heigh Power Machine. Handle andLeg rest Material:Galvanised Steel (GI)ERW Pipes ISI Marked IS1239Minimum 25 mm outer diameter (OD),2.0 3.0 mm thickness Surface Finish Zinc primer plus outdoor grade polyester powder coating(min.60-80 microns),Bending with fullyautomatic Pipe Bending Machine,Welding With Laser Welding Heigh Power Machine.Seat:designed for outdoor playgrounds.Crafted from durable 3 layer HDPE sheets 20mm thik and precision router-cut for Spring:Heavy-duty coil spring,High-carbon steel oralloy spring steel,18 mm-20 mm wire thickness,Coil height:Approx.300 mm.Clamps and Connectors Material:Die-cast aluminium or aluminium alloy Finish:Naturalanodized or powder coated Properties:Anti-rust,tamper-resistant,non-toxic.Fasteners Material:Galvanized Iron(GI),zinc-coated Type:Tamper-proof bolts and nuts Rust Resistance:Min.500 hours salt spray test protection:Plastic safety caps on exposed bolts. Surface Coating Primer:Shot Blasting surface treatment process using high velocity,steelabrasive Epoxy zinc-rich primer (40 microns)Top Coat:Outdoor polyester powder (6080microns)Adhesion:5B rating(ASTM D3359)Color Options:Custom RAL shades,UV-stabilizedSafety Compliance Standards:EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing(optional):Prevention:No head,neck,or finger entrapment zones Edge Protection:Rounded corners,no sharp edges. Installation:RCC blocks or anchor bolts with M20 grouting Installation:Certified team with adherence to manufacturer`s layout Tools andHardware:Supplied with the product SitePreparation:Level ground,drainage recommended. |
| 6 | HSR Item 10.62-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR Rate(Rs.) 570.00 Through Rate |
| 7 | HSR Item 11.6.1-15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand)HSR Rate(Rs.) 138.00 Through Rate |
| 8 | HSR Item 13.41-Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).HSR Rate(Rs.) 396.00 Through Rate |
| 9 | HSR Item 7.22.2-Brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 4488.00 Through Rate |
| 10 | HSR Item 8.8.1.2-Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 1.2. Granite of any colour and shade HSR Rate(Rs.) 1897.00 Through Rate |
| 11 | HSR Item 8.32-ALUMINIUM COMPOSITE PANELS Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.HSR Rate(Rs.) 2475.00 Through Rate |
| 12 | HSR Item 17.69.2-Interlocking Concrete Block Pavement 2. Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect.HSR Rate(Rs.) 655.00 Through Rate |
| 13 | HSR Item 17.23.2-Water Bound Macadam Grading - II 2. Water Bound Macadam (53mm to 22.4 mm)Grading II with screenings Type “B” (11.2 mm aggregates) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specificationsHSR Rate(Rs.) 1243.00 Through Rate |
| 14 | HSR Item 8.30.1-Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 1. White Agaria Marble StoneHSR Rate(Rs.) 2427.00 Through Rate |
| 15 | HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksHSR Rate(Rs.) 83.00 Through Rate |
| 16 | HSR Item 6.15.1-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mm nominal size) HSR Rate(Rs.) 5969.00 Through Rate |
| 17 | HSR Item 7.22.1-Brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate(Rs.) 4404.00 Through Rate |
| 18 | HSR Item 10.30.3-Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cementHSR Rate(Rs.) 601.00 Through Rate |
| 19 | HSR Item 6.39.1-Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).HSR Rate(Rs.) 4135.00 Through Rate |
| 20 | HSR Item 26.58.3-Supply and installation of garden bench 3. Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications. HSR Rate(Rs.) 11438.00 Through Rate |
| 21 | HSR Item 10.100.2-Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.HSR Rate(Rs.) 1863.00 Through Rate |
| 22 | HSR Item 5.7.4-Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortarHSR Rate(Rs.) 585.00 Through Rate Please Enable Macros to View BoQ information |
