|
| 1 | Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc, as directed and stacking them within the specified lead as directed etc. complete.As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 46.29 & PAGE NO.297 |
| 2 | Dismantling brick masonry in lime leads, lifts etc. complete, cement mortar and stacking the materials as directed with all As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 46.09 & PAGE NO.296 |
| 3 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 46.15 & PAGE NO.296 |
| 4 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.Note: Following items to be executed after prior approval of Superintending Engineer.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 32.33 & PAGE NO.211 |
| 5 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc, complete. As directed by Engineer in chargeSSR OF 2022-23 ITEM NO. 46.19 & PAGE NO.297 |
| 6 | Removing Water Closet Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed including throwing the unserviceable materials out side etc. complete. BASIC RATEAs directed by En-gineer in charge.SSR OF 2022-23 ITEM NO. 46.41 & PAGE NO.298 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix Bd. F.6 Page No. 300 and B.7, Page No.38 SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181 |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer mixer/ concrete Batch mix plant (Pan mixer) etc.Bd.F.9 Page No. 303 and B.7, Page No.38SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO.184 |
| 9 | 9. Providing second class Burnt Brick masonry with conventional/ 1.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteBd.G.5 Page No. 315. SSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197 |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Bd.F.8 Page No. 302 and 8.7, Page No.38SSR OF 2022-23 ITEM NO. 25.7 & PAGE NO.182 |
| 11 | Providing sand faced plaster externally in cement mortar using approved screened sand, all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.Bd.L.7 Page No. 369 SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209 |
| 12 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 SSR OF 2022-23 ITEM NO. 32.03 & PAGE NO.209 |
| 13 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc, complete.Bd.L.1 Page No. 367 SSR OF 2022-23 ITEM NO. 32.01 & PAGE NO.209 |
| 14 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..As directed by Engineer- in-charge. SSR OF 2022-23 ITEM NO. 35.14 & PAGE NO.224 |
| 15 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surfaces in two coats including scaffolding, preparing the surface, (excluding the primer coat)etc. complete.Bd.P.6 Page No. 414 SSR OF 2022-23 ITEM NO. 36.12 & PAGE NO.227 |
| 16 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. Bd. P. 1 Page No. 411SSR OF 2022-23 ITEM NO. 36.03 & PAGE NO.227 |
| 17 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 32.34 &PAGE NO.212 |
| 18 | Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mm×600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grillsAs directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 38.4 & PAGE NO.238 |
| 19 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/gneiss. metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Bd. E. 1 Page No. 287SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175 |
| 20 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to 15, 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Bd.M. 12 Page No.385SSR OF 2022-23 ITEM NO. 33.4 & PAGE NO.217 |
| 21 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. completeBd.M. 12 Page No.385 SSR OF 2022-23 ITEM NO. 33.41 & PAGE NO.217 |
| 22 | Providing and laying matt finish ceramic tiles of having size 30 cm 1.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a red of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc.complete, Bd. M.12 Page No. 385.SSR OF 2022-23 ITEM NO. 33.24 & PAGE NO.215 |
| 23 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding 1.5. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc, complete. Bd. M.13 Page No. 386.SSR OF 2022-23 ITEM NO. 33.25 & PAGE NO.215 |
| 24 | Providing and fixing 1st class white glazed earthenware Orissa Type Water Closet Pan 580 mm dia including Por Strap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 42.33 & PAGENO.277 |
| 25 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall, Making good the damaged surface, testing etc. complete. Bd.V.30 & Page No. 565SSR OF 2022-23 ITEM NO. 41.63 & PAGENO.272 |
| 26 | Providing and fixing 15 mm dia, screw down bib/ stop tap of brass including necessary socket unionnut complete. SSR OF 2022-23 ITEM NO. 41.4 & PAGEBd.V.8 Page No. 554 |
| 27 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 42.52 & PAGE NO.279 |
| 28 | roviding and fixing on walls/ celling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BD.V 5 page 551 and as directed by Engineer incharne SSR OF 2022-23 ITEM NO. 42.55 & PAGE NO.280 |
| 29 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per 15 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.As directed by engineer-in-charge. SSR OF 2022-23 ITEM NO. 39.58 & PAGE NO.257 |
| 30 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) GraniteBd.M.31/Page No.393 SSR OF 2022-23 ITEM NO. 33.22 & PAGE NO.215 |
| 31 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaile detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Bd.F.17. Page No. 306 SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188 |
| 32 | Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 39.02 & PAGE NO.245 |
| 33 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Bd.U.1 Page No. 537 SSR OF 2022-23 ITEM NO. 40.01 & PAGE NO.264 |
| 34 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffoldingand curing etc. complete. Bd . L.15 Page No. 372SSR OF 2022-23 ITEM NO. 32.17 & PAGE NO.210 |
| 35 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansBd.A.1 Page No. 259 SSR OF 2022-23 ITEM NO. 21.02 & PAGE NO.153 |
| 36 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling volds with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157 |
| 37 | Providing second class Burnt Brick masonry with conventional/ 1.5, type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Bd.G. 1 Page No. 313. SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197 |
| 38 | Providing second class Burnt Brick masonry with conventional/ 1.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc, complete. Bd.G.7 Page No. 316 SSR OF 2022-23 ITEM NO. 27.06 & PAGENO.197 |
| 39 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm bed of 1:4 thick for treads and risers of steps and staircases, with rounded nosing for the treads on cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Bd. M.22 Page No. 390 SSR OF 2022-23 ITEM NO. 33.18 & PAGE NO.215 |
| 40 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersAs directed by engineer-in-charge. SSR OF 2022-23 ITEM NO. 42.53 & PAGE 280 |
| 41 | Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 39.68 & PAGENO.259 |
| 42 | Providing and fixing solid core flush door shutter commercial in single leaf 32 thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.Bd-T-36, Page No. 500 SSR OF 2022-23 ITEM NO. 39.1 & PAGE NO.246 |
| 43 | Providing and fixing steel window C.R.C. sheet as per I.S. 1513 1986. gauge sect. 65 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter, the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessoriesAs directed by Engineer in charge. ge SSR OF 2022-23 ITEM NO. 39.21 & PAGE NO.247 |
| 44 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall SSR OF 2022-23 ITEM NO. 41.57 and PAGE NO.271 |
| 45 | 45. Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm Tor E section for runner of minimum 40 x 6 mm size for flange, M.S. fiat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. SSR OF 2022-23 ITEM NO. 39.26 & PAGE NO.249 |
| 46 | Providing and fixing black kadappa stone shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.Bd.M.29 Page No. 391 SSR OF 2022-23 ITEM NO. 33.23 & PAGE NO.215 |
| 47 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible. Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed. sand VSI Grade) Bd. F.3 Page No. 298 and B.7, Page No.38 SSR OF 2022-23 ITEM NO. 25.11 & PAGE NO.178 |
| 48 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient roughening if special finish is to be provided and minimum thickness to give a smooth and even surface. curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Bd.F.5 Page No. 300 and 8.7, Page. No. 38 SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179 Please Enable Macros to View BoQ information |
