| 1 | SPECIFICATION3DX XTRA BACKHOE LOADER 3DX Plus, 6 in 1, HDTENGINE Excavator Loader 430, CRID: 55 KW Stage 5 Engine, 4 cylinder, water cooled. Turbocharged with EGR and after treatment system DOC and DPF Displacement 3.0L Gross power 55 kW (74 hp) @2200 rpm Max torque 440Nm @ 1150 rpm TRANSMISSION East Shift synchroshutte transmission provides efforless gear shifting with column mounted rotating switch It consists of a 4 speed, fully synchromesh, smooth shift gear box with integral torque convertor Fasy-to-use, column mounted electric reversing shuttle switch can change machine direction wisilo allowing the operator to keep hands on the steering wheel, leading to fast cycle time easy shift feature uses a knob for easy gear shifting adds to overall ease of operations Bigger effortless foot throttle peda Torque converter stall ratio is 3.01 1BRAKES Service: JCB Q brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated through independent pedals linked together for normal us Two independently operatable foot pedals enable machine to manoeuvre in tight spaces Parking: Hand operated, disc brakes on rear axle input disc. STEERING Power track steering rod system provides equal turn steering & quick response with less operating force Working pressure 160 bar (2 320 psi Oil supply from steering pump passing through suction strainer & return line filter. ELECTRICALS 130 Ampere-hour 12 V battery system with alternator and full road lighting TYRES Front 9 x 16 - 16 P Rear 16.9 x 28- 12 PR SHIPPING WEIGHT 7510 kg TURNING CIRCLE Inner wheels braked A Outside loader bucket m 9.7 (31-10 B Outside wheels m 6.20 (20-4) Inner wheels not braked A Outside leader bucket m 11.8(38-7 At Outside wheels m 8.94 (29-4) SPEED Gear Forward km/hr Reverse km/hr 1st 7.47.4 2nd 11.911.9 3rd 22.4 Not recommended 4th 40.0 Not recommendedstandard tyreswith zero torque converter slip@2200 rpm HYDRAULICS Filtration through suction strainer and return line Filtromatic Filter System pressure (p.s.i.) 362 Pump flow (lpm) @2200rpm 148 Service Hydraulic System 92L Fuel tank 128L Engine coolant 20.5LEngine Oil 15L Transmission 17.5L Rear axle 20LOPTIONS Excavator buckets capacities: 0.12 cu.m & 0.18 cu.m 6-in-1 clam shovel Heavy-duty rear tyres 14 x 25 Intelli-dig Cold start kit PERFORMANCE DIMENSIONS EXCAVATOR PERFORMANCE A Max, dig depth m 5.05 (16-7) B Reach-Ground level to rear wheel center m 7.0 (22-11)C Reach-Ground level to slew center m 5.61(18-5) D Reach at full height to slew center m 2.65 (8-8) E Side reach to center line of machine m 6.14(20-2) F Max. Working height m 6.2 (20.4) G Max. load over height m 4.35 (14-3 H King post travel m 1.02 (3-4 J Bucket rotation - Power deg 18 Bucket tear out force kgf 618 Dipper tear out force kgf 334 Lift capacity to bucket pivot at full reach (No bucket fitted) (SAE J31) (Data with standar dipper) kg 1584 Standard bucket capacity cu.m 0.30 (10.6) Standard bucket width m 0.82 (2-8) LOADER PERFORMANCE M Dump height m 2.93 (9-7 N Load over height m 3.37 (11-1)O Pin height m 3.64 (11-11)P Pin forward reach m 0.41 (1-04)Q Reach at ground m 1.72 (5-7)R Max. reach at full height m 1.24 (4-1)S Reach at full height - m 0.93 (3-1) Bucket dumpedT Below ground level dig depth m 0.12(0-5)U Rollback at ground deg 43V Dump angle deg 41Shovel breakout force kgf 6264Loader arm breakout force kgf 5516Payload kg 1800Standard shovel cu.m 1.1 (38.85)STATIC DIMENSIONSA Overall length m 6.25 (20-6)B Wheelbase m 2.17 (7-1)C Slew center to rear axle center m 1.32 (4-4)D Minimum ground clearance m 0.31 (1-2)E Slew ground clearance m 0.51 (1-9)G Height to top of cab m 2.87 (9-5) H Overall height m 3.90 (11-10)J Track width-Rear m 1.73 (5-8)K Track width - Front m 1.86 (6-1)L Width over bucket m 2.35 (7-9) |
| 2 | SPECIFICATION: 3DX PLUS BACKHOE LOADERENGINEJCB 430, CRID: 55 KW Stage 5 Engine, 4 cylinder, water cooled. Turbocharged with EGR and after treatment system DOC and DPFDisplacement 3.0LGross power 55 kW (74 hp) @2200 rpmMax torque 440Nm @ 1150 rpmTRANSMISSION The JCB synchroshutte transmission provides superb drive power in all conditions. It consists of a 4 speed, fully synchromesh, smooth shift gear box with integral torque convertor and electrically operated reversing shuttle.• Fasy-to-use, column mounted electric reversing shuttle switch can change machine direction wisilo allowing the operator to keep hands on the steering wheel, leading to fast cycle time• The pedals layout and conventional 4-pattern gear lever with transmission disconnect switch adds to the overall ease of operation. On-the-move gear changes are possible• Bigger effortless loct throttle pedal• Torque converter stall ratio is 3.01 1BRAKES• Service: JCB Q brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated through independent pedals linked together for normal use• Two independently operatable foot pedals enable machine to manoeuvre in tight spacesParking: Hand operated, disc brakes on rear axle input disc.STEERING Power track steering rod system provides equal turn steering & quick response with less operating force., Working pressure 160 bar (2 320 psi), Oil supply from steering pump passing through suction strainer & return line filter.ELECTRICALS130 Ampere-hour 12 V battery system with alternator and full road lighting.TYRESFront 22.9 cm (9) x 40.6 cm (16) 16 PR, Rear 42.9 cm (16.9 x 71.1 cm (28) 12 PR (Industrial)SHIPPING WEIGHT7510 kgTURNING CIRCLEInner wheels brakedA Outside loader bucket m 8.64 (78-4), B Outside wheels m 6.20 (20-4)Inner wheels not brakedA Outside leader bucket m 11.6 (38-1)At Outside wheels m 8.94 (29-4) Standard bucket in travel positionSPEEDGear Forward km/hr Reverse km/hr1st 6.5 6.52nd 10.5 10.53rd 19.8 Not recommended4th 36 Not recommendedAbove is with standard tyres& assuming zero torque converter slip@2000 rpm)HYDRAULICS270 Bar (3915 psi) system Pump flow: 114 lpm at 2.000 rpm.Filtration through suction strainer and return line 'JCB Filtromatic FilterServiceHydraulic System 92L, Fuel tank 128L, Engine coolant 20.5LEngine Oil 15L, Transmission 17.5L, Rear axle 20LPERFORMANCE DIMENSIONSEXCAVATOR PERFORMANCEA Max, dig depth m 4.77 (15-8),B Reach-Ground level to rear wheel center m 6.72 (22.1)C Reach-Ground level to slew center m 5.40 (17-9),D Reach at full height to slew center m 2.90 (9-6)E Side reach to center line of machine m 6.02 (19-9),F Max. Working height m 5.97 (19-7)G Max. load over height m 4.18 (13-9),H King post travel m 1.02 (3-4)J Bucket rotation - Powerdeg 185,Bucket tear out force kgf 5.959 Dipper tear out forcekgf 3 257 Lift capacity to bucket pivot at full reach (No bucket fitted) (SAE J31) (Data with standar dipper) kg 1430 Standard bucket capacity cu.m 0.26 (9.18) Standard bucket width m 0.79 (2-7)LOADER PERFORMANCEM Dump height m 2.74 (8-12),N Load over height m 3.32 (10-11)O Pin height m 3.54 (11-7),P Pin forward reach m 0.25 (0-10)Q Reach at ground m 1.52 (4-11),R Max. reach at full height m 1.15 (3-9)S Reach at full height - m 0.88 (2-11) Bucket dumpedT Below ground level dig depth m 0.07(0-3),U Rollback at ground deg 45V Dump angledeg 38Shovel breakout forcekgf 5272 ,Loader arm breakout forcekgf 5635Payload kg 1800,Standard shovelcu.m 1.1 (38.85)STATIC DIMENSIONSA Overall length m 6.0 (19-8), B Wheelbase m 2.17 (7-1) , C Slew center to rear axle center m 1.32 (4-4)D Minimum ground clearance m 0.31 (1-0.2) ,E Slew ground clearance m 0.51 (1-8)G Height to top of cab m 2.87 (9-5), H Overall height m 3.61 (1-10)J Track width-Rear m 1.73 (5-8), K Track width - Front m 1.86 (6-1)L Width over bucket m 2.35 (7-9)OPTIONS• Excavator buckets capacities: 0.12 cu.m& 0.18 cu.m• 6-in-1 clam shovel bucket to doze, dig, grade, backfill, grab and load (1.0 cu.m)• 4WD• JCB extending dipper provides up to Im of extra reach when compared with thestandard dipper.• Heavy-duty rear tyres 14 x 25• Intelli-dig• Cold start kit Please Enable Macros to View BoQ information |
